What's the default auth method

Hi,
I have a web app with <security-constraint> and <auth-constraint> defined, but it doesn't supply login-config. In this case what's the auth method? Thanks

3) External FireWire 800 Drive

Similar Messages

What is the default optimization(CBO/RBO) method choose in Oracle 9i DB?

What is the default optimization(CBO/RBO) method choose in Oracle 9i DB?
Note : If we set the OPTIMIZER MODE as CHOOSE

1) So you mean to say that, for all the tables if we are maintaining statistics, by default it will go for CBO, else RBO right?Yes, unless you dont specify a hint RULE to your queries. At least one table contains statsitics in a two or more table join select statement, oracle uses CBO and calculates statistics using their no. of blocks and other stuff, some internal calculations.
Also, becarefull, old statistics can lead optimizer to choose very pool plan that impact query performance.
2) If we are using CBO, then what will be the order of execution in the where clause, Is it from top to bottom, or reverse?If its a single table with where clause, then, oracle choose either full table scan, or index range scan depends upon the column mentioned in the where clause and availabl indexes.
If query contains multiple tables, then, oracle has to decide between join methods, such as, nested loop, hash join, sort merge join and etc.
3) And also If we are using RBO, then what will be the order of execution in the where clause, Is it from top to bottom, or reverse?
RBO uses its internal calculation to produce the execution plan, more probably gives preference to indexes if a column has an index which appears in the where cluase.
Jaffar

What is the default web-auth required timeout period?

Hi,
As according to the cisco config example. (http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml),
it says:
If clients are in Webauth_Reqd state, no matter if they are active or idle, the clients will get de-authenticated after a
web-auth required timeout period (for example, 300 seconds and this time is non-user configurable). All traffic from the client (allowed via Pre-Auth ACL) will be disrupted. If the client associates again, it will move back to the Webauth_Reqd state. If clients are in Webauth_Reqd state, no matter if they are active or idle, the clients will get de-authenticated after a web-auth required timeout period (for example, 300 seconds and this time is non-user configurable). All traffic from the client (allowed via Pre-Auth ACL) will be disrupted. If the client associates again, it will move back to the Webauth_Reqd state.
What is the default web-auth required timeout period stated in the example?
Many thanks.

Hi,
Yes it is 300 seconds and non-configurable to prevent DOS by depleting IP address on Guest wlan/vlan. There is an enhancement request filed esp. for your situation with Pre-auth ACL.
CSCtj32812 DHCP Option to mitigate the problem of guest client rejoining network
Thanks.Salil
CSCtj32812 DHCP Option to mitigate the problem of guest client rejoining network CSCtj32812 DHCP Option to mitigate the problem of guest client rejoining network

Need help finding the default payment method for supplier site in R12

I am using the following query to find out what the default payment method is for a supplier site.
select pv.vendor_id ,
pvs.vendor_site_id,
iepa.ext_payee_id,
ieppm.payment_method_code
from ap_supplier_sites_all pvs
,ap_suppliers pv
,iby_external_payees_all iepa
,iby_ext_party_pmt_mthds ieppm
where pv.pay_group_lookup_code = 'EMPLOYEE'
and pv.vendor_type_lookup_code = 'EMPLOYEE'
and pv.employee_id is not null
and pv.employee_id =92584--p_person_id
and pv.vendor_id= pvs.vendor_id
and pvs.vendor_site_code = 'HOME'
and pvs.pay_group_lookup_code <> 'ATTACHMENT'
and ((pv.end_date_active is null) or (pv.end_date_active >= sysdate))
and ((pvs.inactive_date is null) or (pvs.inactive_date>= sysdate))
and pvs.pay_site_flag = 'Y'
and pvs.vendor_site_id = iepa.supplier_site_id
and iepa.ext_payee_id = ieppm.ext_pmt_party_id
and ieppm.primary_flag = 'Y'
and pv.segment1 = '131678'
The problem is that I am returning two rows.
I have gone in to the application and changed the default payment method from 'Check' to 'Electronic' and I am able to see the change on one of the records, however I am unable to determine how I'm supposed to narrow it down to just this record. I am pulling what hair I have left out!
Please help.
Chris

Here is the generic query for some one who is faing problem like us.This query will return all the payment methods for all sites of a supplier
SELECT ieppm.payment_method_code,ieppm.inactive_date
FROM ap_supplier_sites_all assa,
ap_suppliers ass,
iby_external_payees_all iepa,
iby_ext_party_pmt_mthds ieppm
WHERE ass.vendor_id = assa.vendor_id
AND assa.pay_site_flag = 'Y'
AND assa.vendor_site_id = iepa.supplier_site_id
AND iepa.ext_payee_id = ieppm.ext_pmt_party_id
AND ass.segment1 = '10033' -- Supplier Number
AND( (ieppm.inactive_date IS NULL)or (ieppm.inactive_date > sysdate)) ;

What is the default OS for iBook and iBook G4?

What is the default OS for iBook and iBook G4?

You can check the specs of ALL iBook models (G3 + G4) at everymac.com
http://www.everymac.com/systems/apple/ibook/index-ibook.html
If your iBook has a processor less than 867MHz it won't be able to run
Mac OS X 10.5 Leopard, though methods exist to allow it unofficially.
Old first model colors iBook G3 (not white dualUSB) have other limits.
A reference app for Apple product specifications, download http://mactracker.ca
Hopefully you can match your questions with the various databases online.
Good luck & happy computing!

What is the default buffer size if we dont specify in buffer write?

If we dont specify what is the default buffer size in BufferedWriter. How to increase/decrease the size of it?
What is the purpose of flush?
If flush() is not used, only partial content is written to the file. Is it because of the default size of the buffer.

THis is the bufferedwriter class, it helps to look at them, look at the bold underlined, thats answers your defualt buffer size
* @(#)BufferedWriter.java 1.26 03/12/19
* Copyright 2004 Sun Microsystems, Inc. All rights reserved.
* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
package java.io;
* Write text to a character-output stream, buffering characters so as to
* provide for the efficient writing of single characters, arrays, and strings.
* The buffer size may be specified, or the default size may be accepted.
* The default is large enough for most purposes.
* A newLine() method is provided, which uses the platform's own notion of
* line separator as defined by the system property <tt>line.separator</tt>.
* Not all platforms use the newline character ('\n') to terminate lines.
* Calling this method to terminate each output line is therefore preferred to
* writing a newline character directly.
* In general, a Writer sends its output immediately to the underlying
* character or byte stream. Unless prompt output is required, it is advisable
* to wrap a BufferedWriter around any Writer whose write() operations may be
* costly, such as FileWriters and OutputStreamWriters. For example,
* <pre>
* PrintWriter out
* = new PrintWriter(new BufferedWriter(new FileWriter("foo.out")));
* </pre>
* will buffer the PrintWriter's output to the file. Without buffering, each
* invocation of a print() method would cause characters to be converted into
* bytes that would then be written immediately to the file, which can be very
* inefficient.
* @see PrintWriter
* @see FileWriter
* @see OutputStreamWriter
* @version 1.26, 03/12/19
* @author Mark Reinhold
* @since JDK1.1
public class BufferedWriter extends Writer {
private Writer out;
private char cb[];
private int nChars, nextChar;
private static int defaultCharBufferSize = 8192;
* Line separator string. This is the value of the line.separator
* property at the moment that the stream was created.
private String lineSeparator;
* Create a buffered character-output stream that uses a default-sized
* output buffer.
* @param out A Writer
*public BufferedWriter(Writer out) {*
* this(out, defaultCharBufferSize);*
* Create a new buffered character-output stream that uses an output
* buffer of the given size.
* @param out A Writer
* @param sz Output-buffer size, a positive integer
* @exception IllegalArgumentException If sz is <= 0
public BufferedWriter(Writer out, int sz) {
 super(out);
 if (sz <= 0)
 throw new IllegalArgumentException("Buffer size <= 0");
 this.out = out;
 cb = new char[sz];
 nChars = sz;
 nextChar = 0;
 lineSeparator = (String) java.security.AccessController.doPrivileged(
new sun.security.action.GetPropertyAction("line.separator"));
/** Check to make sure that the stream has not been closed */
private void ensureOpen() throws IOException {
 if (out == null)
 throw new IOException("Stream closed");
* Flush the output buffer to the underlying character stream, without
* flushing the stream itself. This method is non-private only so that it
* may be invoked by PrintStream.
void flushBuffer() throws IOException {
 synchronized (lock) {
 ensureOpen();
 if (nextChar == 0)
 return;
 out.write(cb, 0, nextChar);
 nextChar = 0;
* Write a single character.
* @exception IOException If an I/O error occurs
public void write(int c) throws IOException {
 synchronized (lock) {
 ensureOpen();
 if (nextChar >= nChars)
 flushBuffer();
 cb[nextChar++] = (char) c;
* Our own little min method, to avoid loading java.lang.Math if we've run
* out of file descriptors and we're trying to print a stack trace.
private int min(int a, int b) {
 if (a < b) return a;
 return b;
* Write a portion of an array of characters.
* Ordinarily this method stores characters from the given array into
* this stream's buffer, flushing the buffer to the underlying stream as
* needed. If the requested length is at least as large as the buffer,
* however, then this method will flush the buffer and write the characters
* directly to the underlying stream. Thus redundant
* <code>BufferedWriter</code>s will not copy data unnecessarily.
* @param cbuf A character array
* @param off Offset from which to start reading characters
* @param len Number of characters to write
* @exception IOException If an I/O error occurs
public void write(char cbuf[], int off, int len) throws IOException {
 synchronized (lock) {
 ensureOpen();
if ((off < 0) || (off > cbuf.length) || (len < 0) ||
((off + len) > cbuf.length) || ((off + len) < 0)) {
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return;
 if (len >= nChars) {
 /* If the request length exceeds the size of the output buffer,
 flush the buffer and then write the data directly. In this
 way buffered streams will cascade harmlessly. */
 flushBuffer();
 out.write(cbuf, off, len);
 return;
 int b = off, t = off + len;
 while (b < t) {
 int d = min(nChars - nextChar, t - b);
 System.arraycopy(cbuf, b, cb, nextChar, d);
 b += d;
 nextChar += d;
 if (nextChar >= nChars)
 flushBuffer();
* Write a portion of a String.
* If the value of the <tt>len</tt> parameter is negative then no
* characters are written. This is contrary to the specification of this
* method in the {@linkplain java.io.Writer#write(java.lang.String,int,int)
* superclass}, which requires that an {@link IndexOutOfBoundsException} be
* thrown.
* @param s String to be written
* @param off Offset from which to start reading characters
* @param len Number of characters to be written
* @exception IOException If an I/O error occurs
public void write(String s, int off, int len) throws IOException {
 synchronized (lock) {
 ensureOpen();
 int b = off, t = off + len;
 while (b < t) {
 int d = min(nChars - nextChar, t - b);
 s.getChars(b, b + d, cb, nextChar);
 b += d;
 nextChar += d;
 if (nextChar >= nChars)
 flushBuffer();
* Write a line separator. The line separator string is defined by the
* system property <tt>line.separator</tt>, and is not necessarily a single
* newline ('\n') character.
* @exception IOException If an I/O error occurs
public void newLine() throws IOException {
 write(lineSeparator);
* Flush the stream.
* @exception IOException If an I/O error occurs
public void flush() throws IOException {
 synchronized (lock) {
 flushBuffer();
 out.flush();
* Close the stream.
* @exception IOException If an I/O error occurs
public void close() throws IOException {
 synchronized (lock) {
 if (out == null)
 return;
 flushBuffer();
 out.close();
 out = null;
 cb = null;
What Flush(); does
Example, you have a file called c, your writer is b and buffereredwriter is a. so your programs calls a, a talks to b, and b talks to c. when you call the Flush method, the information is sent to the outfile which is c immediately before you even close the file, because when you write to the file, it does not write directly, it writes to a buffer, so flush actually causes the buffer to write to file. Also if you call the close method on that file without the flush, the buffer will still get flushed.
consider BufferedWriter c = new BufferedWriter(new PrintWriter("c:\\c"));
you wrap printwriter into a buffered writer, now if you close this "connection" to the file, the buffer will get flushed, noting that all the data is sitting in the buffered and not yet in the file, and this happens if something dont break...

What is the default password for SDM in SP15

Initial password for SDM
Posted: Mar 22, 2006 2:40 PM Reply
I have installed the SP15 SneakPreview. When i am trying to deploy a webdynpro application into portal from NWDS2.0.15, it is asking for SDM password.
Can anyone please tell me what is the default password, because i dont remember providing any SDM password during the installation.
I tried giving the Portal passwword, but it does not seem to work
Thanks
Sharath

the default password is admin
Here's the document that talks about it:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209">Post-Installation Steps</a>

I have a new laptop and want to transfer my itunes music across from the old one. What's the easiest /quickest method?

I have a new laptop and want to transfer my itunes music across from the old one. What's the easiest /quickest method?

Refer to this article:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751

What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)

I feel like I should know the answer to this. I can't believe it is a hard question.
What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)
Easy? Right?
Just plug my iphone in to a mac and copy a photo from the mac to my iphone.
I don't have internet access - I can't email it, or mobileme it, or dropbox it.

iTunes. Other than that there is no direct method. However, do try the iPhone forums.

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

What are the default parameters for PER_EVENTS api

Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

What is the default port on visual administrator with 2004s

Hi
I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
I want to lauch the visual administrator but unable to connect
its saying cannont connect to ip and port....
What is the default port for the first time login
Also,
went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
JF

Hi Jean
The default port for VA is 5XX04 (where XX is the instance number)
the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
Hope this help
Juan
Please reward with points if helpful

What is the default value of EO_INBOUND_PARALLEL

Hi Gurus,
We are on PI 7.0 EHP 1. We have not set the parameter EO_INBOUND_PARALLEL. Does this mean there is only one inbound queue registered by default if the default value is 1? However, I seem to recall that when we had issues with messages stuck in queues, I have seen more than one XBTI8 queues.
Please help me with my doubt. thanks!

Hi,
Thanks for the replies.
How about the parameter EO_INBOUND_TO_OUTBOUND and EO_OUTBOUND_PARALLEL?
I assume by default EO_INBOUND_TO_OUTBOUND is set to 1?
Then what is the default value for EO_OUTBOUND_PARALLEL? Plus to set this parameter you need to specify the receiver, in this case, is it true that EO_OUTBOUND_PARALLEL is not set at all so only one outbound queue? this does not make sense. Or maybe by default EO_INBOUND_TO_OUTBOUND is set to 0 so EO_OUTBOUND_PARALLEL is not used at all?
Thanks.

What's the default auth method

Similar Messages

Maybe you are looking for