What's the diff. between Sound Blaster Audigy MB Audio and the similar but ADVANCED ca

I just bought a Dell Inspiron 53 with?the?former card, but whenever I search for more info about it, I can only find the "Advanced" version. Please, can you tell me, what's the difference between the two cards?Also,? as I was building the PC, Dell offered only two other?audio options, and this was the middle one; none of the other choices was ideal. This appears to be a bottom-of-the-barrel card, so can anyone recommend?a replacement?card for under $40-$00 that wouldproduce very high quality music for my new 5. wireless Dell speakers?Much obliged.

I've been fiddling around in the Device Manager and it has Other Devices and under it is Multimedia Audio Controller, I can choose to either reinstall the driver udate the driver, disable it, or uninstall it. Here's what comes up on properties
This device is not configured correctly. (Code )
To reinstall the drivers for this device, click Reinstall Driver.
Help would be appreciated here. I'm a big gamer and would like to have this up and running before our first CAL Match.

Similar Messages

  • Sound blaster audigy 2 ZS and the rege

    hello .i was going to do a uninstall and reinstall of my audigy 2 ZS.i would like to know what files in the regedit to delete.which ones are for the card.i am hoping to do a clean install of my card.any help would be cool.thanks

    frankr,
    The thread below doesn't list the creative entries to delete from the registry (that would vary by card), but it might get you started.
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=46974

  • Sound Blaster Audigy 2 ZS and Logitech 5.1 Surround So

    Hello everyone, this is my first post on these forums, so I thought I'd just start out by saying hello.
    I also have a bit of a problem. For the past several months I've had a Sound Blaster Audigy 2 ZS and a set of Logitech X-530 5. Surround Sound speakers hooked up to my computer. For a these past few months, only two of my speakers have been functionable.
    I know they're not broken, because I can plug in separate cables into a certain plug and either my two front speakers will work, my two rear speakers will work, or my center speaker will work. And yes I do have the most recent drivers for my card. :P
    If anyone would be able to help me with this problem, I would really appreciate it. Thanks!
    By the way, here's a picture of the X-530 Speakers I'm using, just in case anybody needs to see them for reference:
    http://img53.imageshack.us/img53/2758/b0002wpscg0ss500sclzzzsr.jpgMessage Edited by Triko on 02-26-200706:20 PM

    Turn on CMSS if you have not done so.
    Jason

  • Could someone tell me the differences between ipod 4g released in January and the new iPod 4g released other than iOS5 ?

    I just bought an iPod touch from NewEgg which said it was the latest iPod. When I opened it, I couldn't find iMessage. So when I checked the version, it was 4.3.5. Just want to know the differences between both iOS5 and earlier one, other than of course the OS. Wondering whether to return it or upgrade the OS to iOS5.

    The OS really is the only different thing.
    An iPod Touch 4th generation will still be an iPod Touch 4th generation no matter what OS you have running on it.
    If you want to know more of the feature of iOS 5 then you can check here: http://www.apple.com/ios/.
    You also don't need to return the product if you want the latest OS. You can do it yourself through iTunes.

  • Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

    what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
    and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

    I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
    I have copied the advice I received/didnt recieve from creative.
    Best of luck
    Dear Martin
    Thanks for your reply
    I am sorry for the problem you are facing.
    To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
    That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
    If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe:
    Original Message Follows:
    Hi
    I understand you must be busy, so no problem.
    No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
    Half life two: front left-right and centre. NO rears
    Fear: Front, left, right, & centre. No rears
    Farcry Front left, right & centre. No Rears
    When I run your speaker test HISSSSS, No Rears, no front left or right
    Beats me?
    Regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 24 January 2006 5:44
    To: Martin
    Dear Martin
    I apologize for the delay on the answer.
    If you select Dolby Prologic mode on the decoder, are you able to listen
    the game audio, with EAX, in all of the speakers?
    Regarding to the optional bay dri've, you can purchase it from ou
    Best Regards
    (Mod Note: Name Removed)
    Original Message Follows:
    Hello
    Your email was helpful, unfortunately, not for my unit, you see I would
    have
    connected the Jack leads in by now if the inspire had Jack lead inputs
    as
    you describe
    Please don't think I am being sarcastic, but from reading the
    correspondence
    below it would seem as if your department is having difficulty
    understanding
    my problem.
    Also it would seem your department doesn't have the necessary technical
    information on your very own product, so to help with your dilemma I
    have
    taken photos of the input/outputs on the Inspire unit.
    You will clearly see the inspire has no inputs other than Coaxial and
    Optic.
    This leaves me back to my last post. I think the solution would be for
    me to
    purchase the correct processor, which would have come with the original
    sound card had I not been a little tight on the money front.
    I have attached a photo of the sound card with the processor, I would
    love
    to buy this processor but find myself unable to locate this product on
    your
    web site. Would you possibly be able to send me the correct link to this
    item so I can buy this Processor Please?
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 8 January 2006 0:3
    To: Martin
    Subject: RE: CLE -
    Dear Martin
    Thanks for your reply
    Your soundcard is Audigy 2 ZS
    Your speaker is Creative Inspire 5. Digital 5500
    You will need to have a 3:3 cable(with the color green, black, orange)
    to connect your soundcard to your speaker, to achieve the 5. effects
    with games.
    Below is the connection:
    - Connect line out jack of Audigy 2 ZS
    to 'Front' of Creative Inspire 5. Digital 5500 using the green color
    connection
    - Connect line out 2 jack of Audigy 2 ZS
    to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
    connection
    - Connect line out 3 jack of Audigy 2 ZS
    to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
    orange color connection
    Once you have done the correct connection, play the game DOOM3.
    Ensure you have selected either the EAX or surround option in the game
    settings.
    Does it work?
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe
    Original Message Follows:
    You have lost me. Your sound card clearly states that I can have EAX
    surround decoding from the sound card I have purchased.
    All of the games on your web site claim to give me an environmental
    effect
    that will blow my mind, hence EAX.
    All I have done wrong is NOT buying your decoder that comes with the
    sound
    card. My mistake.
    All I want to do is re-address this issue and buy the correct
    decoder/processor.
    Can you point me to the correct link on your web site so I can buy the
    correct decoder/processor?
    As for the PCM out of the above cables, this foxes me as my other
    equipment
    only use Optical cabling on my Lexicon processor and from that I have DD
    7., DTS 7. and meridian 5. lossless.
    My issue is more to do with NO EAX from the rear and centre channels
    while
    in-game.
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 6 January 2006 09:3
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
    Dear Martin
    Thanks for your reply
    All commercial digital connection eg. optical or coaxial cable will only
    carry PCM stereo signal. If you want to output the signal to a surround
    5. with extra EAX environment effects, it will not be possible at all
    since it is only restricted to stereo channel signal.
    As per current industry limitations, we are bound to follow the standard
    one-signal output for all our SPDIF and Optical output jacks. This is
    something that is currently shared by all vendors for all products.
    Please note that all games are not dolby digital, even they are , it
    will require certain motherboard to encode it to dolby digital signal,
    which our soundcard does not support.
    You can only use analog connections to gain true 5. surround for
    gaming..
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe
    Original Message Follows:
    Hi Joong
    I don't fully understand your email, but I do get the gist of what
    you're
    saying and understand I need to connect the analogue cable to fully
    appreciate the sound in EAX.
    Would you be able to tell me what product I could buy from your
    catalogue
    which would marry up with the sound card I have, as I understand now
    that
    the Inspire 5. will not do the job.
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 6 January 2006 04:00
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
    Dear Martin
    Thank you for the reply.
    Computer games written with support for 3D audio do not require a Dolby
    Digital Interacti've Content Encoder (DICE) to output multichannel sound,
    with no exceptions. Sound devices that support the real time encoder
    technology from Dolby will simply receive the multichannel wave file
    output and encode it in real time to a somewhat modified Dolby Digital
    bitstream. Creative does not support the Dolby Digital Interacti've
    Content Encoder on any of its sound cards.
    The only difference between a Sound Blaster card and an audio card that
    has a real time encoder, is that you can make a one-wire, digital
    connection from your audio card to your home theater receiver and enjoy
    discrete multichannel sound from the game. However there will be a
    continuous, slight delay, known as "latency", as the encoder is creating
    and transmitting the bitstream, and of course the compression scheme
    being used is "lossy" (i.e. not bit-accurate).
    If you want to enjoy 3D audio in 3D enabled PC games in multichannel
    surround sound with a Sound Blaster card, it is recommended that you
    connect the analog outputs of the sound card directly to the analog
    inputs of the receiver. This will require 3 cables for 5. surround
    sound, one for front right and left, one for rear left and right, and
    another one for front center and subwoofer. Though it requires more
    cables than a real time encoder system, it will not have any latency
    issues. When connecting PC audio to a home theater receiver, Creative's
    latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
    are likely to provide higher quality audio than any Dolby Digital real
    time encode system available for the PC today.
    Please retain all the previous correspondence when replying to this
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Please do not use this link to submit technical queries
    Original Message Follows:
    Hi
    One particular game which has "in-game" DD is Farcry; I used this as my
    benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
    it
    on friend's machines and they get the full surround effect so I Know
    this
    version is ok. I also have ALL of the game patches & updates.
    I would like to point out that while playing Doom 3, Half Life 2,Fear,
    Colin
    McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
    ops, All these games have EAX HD, which is enabled within the options
    menu
    "in-game", But I do not get ANY use out of the rear's and I might as
    well
    listen in stereo.
    No, inspire 5500 does not automatically switch while "in-game" when DD
    is present as you would expect, but does if it was a Movie, which makes
    me
    think the DD stream isn't getting to the processor.
    I originally thought I could put all this to rest if I could buy the
    control
    panel that would have come with the Sound card if I had not tried to
    save
    money, but every time I search your accessories site I get completely
    lost,
    it really isn't user friendly, the sub-menus are very time consuming and
    point you in the wrong direction because they are not categorised as Joe
    public would understand
    I downloaded your TEST Movies and creative demo player utility, ran it
    but
    still no EAX HD or DD if that were present.
    I want to put this card and Processor into my boys computer (which is
    the
    same Spec as mine and I will update to the FX series, but I am unwilling
    if
    I cannot find a logical reason why this set-up cannot work first.
    Would it have anything to do with the pins on the Digital out on the
    sound
    card plug, the one I bought and was attached to the last email? Only
    sending
    certain channels down to the processor?
    Regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 5 January 2006 08:09
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
    Dear Martin
    Thanks for your reply
    Your speakers are fine as you mentioned that there is sound from all the
    speakers when you are playing movie.
    May i know what game are you playing when there are no sound from the
    rear speakers?
    Have you done the appropriate settings in the game to achieve the 5.
    sound?
    Is there any game patches that you will need to update?
    Does the Dolby Digital LED light up when you are playing the game?
    Please retain all the previous correspondence when replying to this
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Servic
    Original Message Follows:
    Hi
    I am sorry; I should have said the Inspire 5. was model number digital
    5500
    S/N SW330030026.
    The inspire has these connection on the back of the processor
    >From top/back of unit
    Audio Outputs
    Front
    Rear
    Centre/subwoofer
    Audio inputs
    Audio line in
    Coaxial
    Optical
    DIN
    The Din to a remotely located Subwoofer which has the speaker leads
    inputting into it. Plus power.
    Attached is the creative view of the controls menu and I have attached
    the
    invoice I was sent, it shows the lead I was told to fit.
    As I said, I can now hear DD5. while within a movie from ALL speakers
    BUT
    no sound from rears during IN GAME DD5.
    I do not use this PC for films only games.
    Regards
    Martin
    If you are having a digital connection, it is normal for only get only
    front left/right is you use the speaker test option.
    http://us.creative.com/support/kb/article.asp?l=3&sid=4858
    Speaker test only outputs from two front speakers?
    You mentioned that that you are unable to get any sound from the rear
    speakers when playing game right? May i know are you using a digital
    connection? May i know what speaker settings have been made under
    Creative Speaker settings?
    Do get back to me on the above.
    Thanks
    Original Message Follows:
    Operating System: Windows XP Professional x64 Edition
    Creative Model Number: SBO 350
    Computer Brand/Model: home made
    Processor/CPU: AMD 64
    Memory: Gig DDR 4
    BIOS Type/Revision: 5. 39
    System Board/Chipset: ASUS A8N-SLI Deluxe
    Detailed Problem Description:
    I have the above Sound card.
    I also own Inspire 5. amp/processor
    I Wanted to save money by connecting above sound
    card to amp/processor
    Connections on sound card made life very difficult
    I contacted Creative for help. you told me to buy
    an RCA to mini jack cord which also has other connections, from your
    web site, (I tried to find
    the product number for you, but your sub-menu
    system is so poor I couldn't locate the RCA/mini
    3.5 /to phono link for you) this cord connects
    directly into the digital in, on the sound card (3.5 Mini jack) to the
    coaxial input on the
    inspire 5. amp/processor.
    I have enabled ALL sp-diff settings and digital in
    setting on every program/utility/kitchen sink and all.
    I have an SP-Diff wire from DVD burner to creative
    sound card, and yes its enabled and digital only
    is selected.
    I can play a DVD and see the inspire 5.
    automatically change from Pro-logic to Dolby
    digital when it See's an AC-3 stream.
    when I try and play ANY game you say has EAX
    ,2,3,4 I cannot get any sound from my rear
    speakers (see above in Dolby Digital ALL speakers
    work correctly)
    when I enter the set-up menu within the creative
    software you supply with the sound card and select
    5. speaker, digital only, test the speakers via
    the white noise function, all i hear is left and
    right noise. no centre, no rears.
    I phoned you tech support line, the boy on the
    phone didn't have much of a clue about your
    product and I had to tell him what connections sit
    on the inspire 5. series amp/processor.
    I want to build another PC for my son, I want to
    add the FX series sound card and amp, but i am not
    willing to buy anything until i feel you have
    helped me to solve this problem first.
    please can you help, I am at the end of my tether
    with this sound card.
    kind regards
    Martin Waite
    Message Edited by Daniel-CL on 0-28-2006 :36 PM

  • Hi this pandu can i know what is the diff between pnp &pnpce ldb

    hi,
       this pandu can i know what is the diff between pnp &pnpce logical database.
    thanks and regards,
    pandu.

    pretty much the same.. except that PNPCE has additional functionality to deal with Concurrent Employment.. PL go through <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm">SAP Help</a> for more info.
    ~Suresh

  • SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

    (ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
    CONTINUE ON-
    Download RAR file with ISO inside and install if you don't have the installation CD
    installation cd with EQ download: http://files.filefront.com//;689430;;/
    If you do or after you finish downloading goto step A.
    A) Take your Creative Driver/Install CD, copy it to your hard dri've.
    B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
    C) Set it for Windows XP SP2.
    D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
    E) Restart when told to
    F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
    G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
    Message Edited by jeepbme on 03-08-200708:50 PM

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Sound Blaster Audigy, DR release 2.8.4 failed just like that

    Hi, I have a big problem, last Saturday someone has used my computer he did nothing all too strange he only downloaded some files and had an audioconversation on his MSN-account. But to my astonishment the sound disappeared. I have tried everything in my ability on my knowledge of computers and this site. I have checked every configuration and all. I have re-installed and updated everything but nothing works, does anybody have an idea what I can do?
    Sound Blaster Audigy, DR release 2.8.4Date: Agust 8th 2005
    Program version: 5.2.8.64
    Application instance id: PCI\VEN_02&DEV_0004&SUBSYS_005A02&REV_03\3&6AAA0&0 &60
    Windows XP Professional 2002 version service pack 2
    Need more info? let me know!

    go online to http://support.creative.com/Products...Audigy+2+Value?go to the bottom of page and click auto update and up date all your drivers.
    Or go to your start menu click on settings, click open control panel, your system file click it open, click open Device manager, in device manager scrool down till you find sound,video game controllers double click that open, go down till you find the name of your sound card right click on that, click on properties a window will open up with a bunch of tabs at the top find the driver tab click it open find where it says update driver click that and let it do its thing? after done restart your computer good luck!

  • Sound Blaster Audigy

    Hello,
    I have brought this Sound Blaster Audigy sometime ago and it makes a screaming horrible noise when i try and talk on ventrilo.
    I have uninstalled multiple times, installed drivers, iv done everything i can possibly think of. the current driver is 5.2..608 and it says the Driver date is 20/03/2006.
    I took some screenshots of the setup.
    [IMG"]http://i20.photobucket.com/albums/b23/CallumPirie/untitled2-.jpg[/IMG]
    [IMG"]http://i20.photobucket.com/albums/b23/CallumPirie/untitled-3.jpg[/IMG]
    any help would be great?

    After you reformatted your hard dri've did you install the chipset driver? What OC, XP, Vista?
    Dell XPS 600 Intel Pent D 830 3.0ghz
    Chipset- Nvidia nForce4 SLI Intel Edition
    WD 60gb HD
    2gb Ram
    DVD-ROM
    DVD-RW (Plextor 760A)
    Creative XF-I Extreme Music
    Logitech X-540 speakers
    EVGA 7950GT
    Dell 2007WFP (I-SPS panel)
    Win XP SP2
    BIOS A

  • Sound blaster audigy 4 car

    i have a sound blaster audigy 4 card and have lost the manual. could you please tell me what color plug is the correct one for headphones

    Hi,
    Go to the Support section of the website and select your product. You should see Quickstart User Guide next to the Audigy 4 picture in the center. Click on the Quickstart User Guide, it should bring you to the manual download.

  • Sound blaster Audigy 2 ZS bad so

    Hi.
    I have a Creative Sound Blaster Audigy 2 ZS and I just installed Windows Vista yesterday. The auto updates for Vista gave me some working drivers for my sound card, but sometimes the quality just sounds way worse than it did with Windows XP. Has anyone else noticed this? Is there a way to fix it's
    James

    First unistall Creative stuff through add remove programs.
    Next run Guru3D driver sweeper and double check the log for failed removals.
    Next uninstall Creative hardware in Windows device manager. (also tick "delete the driver software for this device")
    After that, you should have deleted everything!
    As for "the best drivers", both are (the same but) different and it depends on what you want to use your card for. Both work fine wth ALchemy and both get the job done.
    daniel_k's latest drivers have equalizer, louder volume and advanced CMSS. daniel_K also has a few hybrid ISO with DVD audio, MIDI and other valuable applications. They don't always perform as they should though for obvious reasons (NO OFFICIAL CREATIVE VISTA SUPPORT - XP applications - No Hardware Audio).
    nomoregoatsoup are just recent X-Fi drivers and a basic Creative Audio console. They offer improved sound quality over the official version and also offer limited DTS/SPDIF options like the Dell counterparts.
    All current Audigy Vista drivers are inferior compared to XP ones.

  • Sound Blaster Audigy installed - How do I play Auxillary inp

    I connected my li've dri've with my Sound Blaster Audigy (). After doing this, I installed the drivers from the website below. However, I only installed the program "Creative Sound Blaster Audigy, Audigy 2 series and Audigy 4 series Driver 02.08.0004."
    That program doesn't come with anything (as far as I can tell) that will let me listen to the audio coming in through the auxillary plug on the Li've Dri've. Does anyone know what I need to install so I can listen to stuff through my li've dri've?
    http://us.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=&Product_Na me=Audigy&Product_ID=4847&modelnumber=&driverlang= 033&OS=0&drivertype=0&Image4.x=33&Image4.y=3
    Thank you very much and sorry for the dumb question.

    AutomaTom wrote:
    Ok, so, here's the deal...
    I uninstalled and reinstalled the driver according to this (http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english_add,U={B8F6030-DA4F-D3-94F4-00500463020E},Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},d=3025443648,VARSET=ws:http://us.creative.com,case=72). However, I did not have the installation CD so I used the driver I downloaded, but everything seemed to work fine and sound played fine. Problem is, when I open windows "Play Control" I do have an auxilliary option, but sound still does not play out of the auxillary option.
    I tried again to use "Li'veDrvUni-Pack(ENG).exe", but it again gave me the message "Setup could not detect any Sound Blaster Audio card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program. Setup will now exit."
    Please someone help me I'm trying to get my new Sirius to play through my auxillary and I just can't seem to get this to work. I have the IDE cable connected from the Li've Dri've to the card and the black cord connected from the card to the driver and, with this same setup, the card worked fine on a different computer. Is there some software I need to download for the card? The only thing that came with the driver package was the driver and "Creative Audio Console" and I have no other Creative programs whatsoever.
    Thank you for all your help. I'm sorry to be such a newbie, but I really want to make this work.
    Why are you trying to install the Li'veDrvUni-Pack(ENG), if you got an Audigy series card?
    I think the Li'veDrvUni-Pack(ENG) is intented for SB Li've! cards and not for Audigy.
    If you have an "OEM"/"Var pack" version of the card then you perhaps need to patch the installation using ctcomp.exe
    (you'll find the link and instructions by searching the file from this forum).
    jutapa

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Sound blaster audigy plat. EX

    i recently bought a sound blaster audigy platinum EX(not the audigy 2 plat. EX)i was just wondering if the sound from this sound card is better then the on board sound of the k8n ne plat. i have a feeling that it is, i just want to make sure. also, has anyone had any problems installing this type of card and if so how did you go about fixing them? thanks

    siruis,
    go to the mixer settings and one of the sliders. the one
    beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
    slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
    hope this helps you.
    john ( good luck )

  • Sound Blaster Audigy 2 ZS Internal Drive (Upgrade Opti

    I own a Sound Blaster Audigy 2 ZS, and in the instruction manual and on your website you mention a Internal Dri've Upgrade Option like the one that comes with the Sound Blaster Audigy 2 Platinum. My question is i have found similar products available for the Sound Blaster Li've series, but i have not found that product available as an upgrade for the audigy 2 zs. Could you tell me if it is not in production or if the li've di've IR is compatible with the audigy 2 zs. Also the manual noted a adapter needed for the spdif out, were is that available?

    Anoddin,
    The Audigy 2 ZS dri've is here:
    http://us.creative.com/products/prod...=6&product=024
    Jeremy

Maybe you are looking for