What's the difference between Screen Sharing and Remote Management?

As the title asks. What is the difference between the two?
Because heres the thing. I set Screen Sharing on in Sharing. Then a few days later I will go back to the Sharing preferences and instead of Screen Sharing being checked. Remote Management is now checked, not Screen Sharing. What's the deal? Is that normal?
I was wondering if it was because I log into my iMac sometimes using my iPhone with that Mocha VNC program. Its the only program I use to remotely control my computer. Is that it?
Any help I can get is appreciated! Thanks!

Remote Management provides support for the additional functionality of Apple Remote Desktop as compared to a standard VNC setup. The options are otherwise identical.
(35284)

Similar Messages

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

What is the difference between personnel development and performance management

Hi,
What is the difference between personnel development and performance management in terms of configuration and in portal level .
Thanks
Srikant

HI Srikant,
Personnel development is PD module where u can configure the qualification catalog with the proficiency which can be attached to the position or job as a requirement and the same can be attached to the person as a qualification and then you can do the profile matchup and find any qualification deficit and can propose any trraining required to impart the qualification.And also you can do succession planing, career planing and also development plan.
Performance management is an appraisal cycle in a company . All appraisal process between manager and the employee will be taken care via portal with the appraisal template.(form)
hope this will help you.
regards,
DInesh

What is the difference between Serial numbers and Batch management.

Hi Gurus,
Can anyone explain the difference between Serial Number and Batch Management in breif.
Regards
Ravi

Hi,
Serial number management and batch management are different functions that can be
used in conjunction with each other.
A batch represents a non-reproducible subset
of the total quantity of a material held in stock, which is managed separately from
other subsets of the same material.
For Example Different production lots
(for example, paints, wallpapers, pharmaceutical products), delivery lots or quality
grades of a material.
whereas a serial number is a number that you give to an individual item of material in addition
to the material number, in order to differentiate between this individual piece and all
other items of the material. The combination of material number and serial number
is unique. It is not necessary to use the batch management function to use serial
number management.
Regards
VIjay.

What is the difference between Personnel Administrator and Line Manager?

I understand that Personnel Administrator is responsible for all the master data in Personnel Administration. Who is Line Manager in Recruitment? While administering the vacancies, what is the difference between both of them in Recruitment.
Points assured.

Hi Nivedita,
A line manager may be a chief position in OM Structure.
A person who holds a managerial position in a company or department and who makes decisions in an area of responsibility.
Line managers can act as the first person responsible for applicant correspondence.
In the Recruitment workflow, tasks requiring a decision are sent to line managers.
Regards,
Kapil

What's the difference between "Full Name" and "Account Name"

Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

Your computer name by default would be "John David Appleseed's Macbook Pro"
But you can always change that in System Preferences->Sharing
And yes, the first account you set up will be an administrator.

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What's the difference between shut down and log out?

Hi,
I have a MacBook Air and will sell it.
I like to take out my name but don't know how.
What will happen if I Log Out (my name comes after that)?
What's the difference between Shut down and Log out?
Help please,
Thanks

Welcome to the Apple Support Communities
The shut down turns off the Mac and a log out closes your user and take your computer to the log in screen. To sell the Mac, you have to reinstall Mac OS X erasing the disk. Open  > About this Mac and copy Version

What are the differences between iphoto ios5 and iphoto ios6?

what are the differences between iphoto ios5 and iphoto ios6?

There is no difference unless you update iPhoto.
The iPhoto.app was updated and now version 1.1 is available. This version includes the ability to create Shared Photo Streams if you have iOS 6.
-Doug

What is the difference between interactive report and alv interactive repor

what is the difference between interactive report and alv interactive report
could u plz explain clearly.

Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1                                      *
REPORT ZKAL_ALV_INTERACTIVE_1                  .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
          KUNNR TYPE KUNNR,
          NAME1 TYPE NAME1,
          ORT01 TYPE ORT01,
        END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
          VBELN TYPE VBELN,
          ERNAM TYPE ERNAM,
          ERDAT TYPE ERDAT,
          NETWR TYPE NETWR,
          WAERK TYPE WAERK,
         END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
         NAME1
         ORT01 FROM KNA1 INTO TABLE T_KNA1
         WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'BIKE'
   I_GRID_TITLE                      = 'CUSTOMER DETAILS'
   IT_FIELDCAT                       = T_FCAT
   IT_EVENTS                         = T_EVENTS
TABLES
    T_OUTTAB                          = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT
     I_LOGO                   = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
         ERNAM
         ERDAT
         NETWR
         WAERK
               FROM VBAK
               INTO TABLE T_VBAK
               WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'KALEEM'
   I_GRID_TITLE                      = 'LIST OF ORDERS'
   IT_FIELDCAT                       = T_FCAT1
   IT_EVENTS                         = T_EVENTS1
TABLES
    T_OUTTAB                          = T_VBAK.
ENDFORM.    "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT1
     I_LOGO                   = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM.    "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
    READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem.

HT1600 what's the difference between apple tv and apple tv2?

What is the difference between apple tv and apple tv 2?
How do I get videos on my Ipad to play on my Apple TV? I tried Airplay and only vocal comes over.

Thanks! Yea, I'm leaning that way and from everything I've read the 'biggest' benefit would be Airplay - and the 5:1 surround in my gameroom (or the 7:1 surround in my screening room). I don't stream movies - I'm more of a blu ray collector and watch movies that way - so in all probability I wouldn't use Apple TV in the screening room - but there are several other locations where it could be a nice addition.
I do watch some TV shows on my iPAD, and lots of music videos - so perhaps, with Airplay they'll look/sound even better if I push that content to one of the other big screens.
For the most part - whenever I wanted to watch something from my iPad on the big screen, I just connected it to my A/V receiver - pressed play, and enjoyed. Apple TV would now become that device that's connected to my A/V receiver, and the iPad more of a remote - uncabled.
Again - thanks for the reply; it's proven very helpful.
Cheers.

What is the difference between customer exits and user exits?

hello friends,
what is the difference between customer exits and user exits?

Hi
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.     *-- Mani
The following document is about exits in SAP :-
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
    CASE okcode.
        WHEN 'BACK OR EXIT'.
            CASE sy-dynnr.
                    WHEN '100'.
                         SET SCREEN 0.
                         LEAVE SCREEN.
                    WHEN '200'.
                         SET SCREEN 100.
                         LEAVE SCREEN.
             ENDCASE.
      ENDCASE.

What is the difference between "Group Albums" and "Albums"

What is the difference between "Group Albums" and "Albums"

An album is a shareable object; you can add photos to an album, then subsequently share that album with someone else. It's better than sharing your whole library, and allows you to make and share lots of different related sets of photos.
Group Albums allow you to collaborate on an album with others. Both you and the collaborators can upload photos or videos, and view them in My Library. All members of the Group Album can also edit, copy, print, and download the items in the album.
Only members of Photoshop.com can participate in Group Albums. But since membership is free, you can invite nonmembers to participate in a Group Album, and they can create a Photoshop.com account and contribute files.
-Mark

What is the differences between Transparent,Pooled and Cluster tables?

Hello all,
What is Pool table?What is the differences between Transparent,Pooled and Cluster tables?
Regards!
Purna

Transparent table:
Tables can be defined independently of the database in the ABAP Dictionary. The fields of the table are defined together with their (database-independent) data types and lengths.
A table definition in the ABAP Dictionary has the following components:
Table fields: The field names and the data types of the fields contained in the table are defined here.
Foreign keys: The foreign keys define the relationships between this table and other tables.
Technical settings: The technical settings define how the table is created on the database.
Indexes: Indexes can be defined for the table to speed up data selection from the table.
There are three categories of database tables in the ABAP Dictionary.
A physical table definition is created in the database for the table definition stored in the ABAP Dictionary for transparent tables when the table is activated. The table definition is translated from the ABAP Dictionary to a definition of the particular database.
On the other hand, pooled tables and cluster tables are not created in the database. The data of these tables is stored in the corresponding table pool or table cluster. It is not necessary to create indexes and technical settings for pooled and cluster tables.
Pooled table
Pooled tables can be used to store control data (e.g. screen sequences, program parameters or temporary data). Several pooled tables can be combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated pooled tables are stored.
Cluster table
Cluster tables contain continuous text, for example, documentation. Several cluster tables can be combined to form a table cluster. Several logical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or object-by-object access. In order to combine tables in clusters, at least parts of the keys must agree. Several cluster tables are stored in one corresponding table on the database.
Regds,
Manohar

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What's the difference between Screen Sharing and Remote Management?

Similar Messages

Maybe you are looking for