What's the difference between sync and back up

I'm trying to understand the iCloud and figure out what's going on. I purchase music on Ipone and it shows up on iPad but podcast do not. App data does not sync. How do I know if it's even being backed up? My iBooks purchases sync, but my bookmarks and highlights do not. Photos sometimes sync.
Ive tried "back up now" under iCloud settings, but that doesn't seem to help much, I can't tell if sync over wifi is working because Im not sure what all it's suppose to sync. Do I need to connect iOS devices to Mac mini and sync over iTunes and do a back up?

This is a good explanation, for half of the situation. Could you please describe how this checkbox affects the more common scenario of new Apps that are purchase/downloaded to the iPhone? Are they not synced if this box is unchecked? Apple should reword this checkbox label to better indicate if it applies "just in one direction" or both directions.
For example, my wife and I both have iPhones, use the same account to buy Apps. I was looking for a way to avoid all her apps ending up on my iPhone after I sync, and then I have to delete them from my phone and clean up the App screen layouts, etc. I'm sure she doesn't want all of my new Apps either. However, if I UNCHECK this "Automatically Sync New Apps" box, will the Apps downloaded on the iPhones (we rarely buy on the computer in iTunes) then not get synced automatically? I realize that one can manually check the box for each App in the list within iTunes, to force the sync, but one can do that only while the device is connected. Syncing at our house is usually done in a hurry, who has time to sit down at the computer every time and scrutinize which Apps should be sync'd. What I was hoping is that iTunes could be smart enough that when it sees a new app on an iPhone, it could remember the App came from that iPhone and check the box to sync, but just to that device. Unless someone goes in and manually checks the box for that App on other devices. Maybe that is in fact the way it works, but I was hoping someone knew for sure and could confirm.

Similar Messages

What is the difference between reset and adobe reset??

what is the difference between reset and adobe reset??

Reset and Reset (Adobe) will have the same effect unless you have changed the defaults.
For raw files LR uses its own defaults as the starting point for developing an image. For example, if you don’t apply your own import preset the standard default settings under detail are:
Sharpening:
Amount 25
Radius 1.0
Detail 25
Masking 0
Some users like to adjust these and make the tweaked settings into their own defaults. After making the desired adjustments in Develop simply hold down Alt and the reset button changes to Set Default.
Clicking the button will save the new default settings. This can be useful if you have more than one camera and wish to use different defaults for each.
To get back to the standard defaults simply hold down shift and click Reset (Adobe)
Restore
You can also restore the default settings globally in the develop module from the top menu:
Develop >> Set Default Settings
Then click the button "Restore Adobe Default Settings"
The standard defaults will then apply again to all future imports. For photos already in the catlaog where a non-standard default has already been applied you would need to adjust them manually using Shift+Reset (Adobe) but after adjusting one, it is then possible to sync all the others.

What is the difference between exists and in

hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
Thanks

You get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query.

What is the difference between ABAP and HR-ABAP?

Hi people,
Could u just tel me abt what is the difference between ABAP and HR-ABAP?
Thanks in advance,
Sanjeev K.V

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
Also,
HR:
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
And finally,
Few notes are below:
InfoSets in the HR Application
You can use SAP Query in HR to report on HR data. Queries are maintained as described in Creating Queries. The special features of queries created for HR are described in Maintaining Queries in the Human Resources Application. The maintenance procedure for HR InfoSets differs from the described procedure inasmuch as HR data fields are grouped together in infotypes.
InfoSet management in SAP Query is also used for InfoSet Query. For further information, see Functions for Managing InfoSets.
If you want to create InfoSets for HR, you can use logical databases PNP, PNPCE, PAP, and PCH (see HR Logical Databases). The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
The reports you can execute using InfoSets based on logical databases PNP (or PNPCE) or PCH are similar, but differ in that they can select different objects. The following table describes the connection between the logical database, and the infotypes you can include in an InfoSet. It also provides you with one or two examples of reports that you can execute using the appropriate InfoSets.
Logical database PNP/PNPCE* PCH PAP
Selection of Persons Objects from Personnel Planning Applicants
Infotypes that can be included in the InfoSet Infotypes for· Personnel Administration (0000-0999) · Time Management (2000-2999) · Payroll infotypes · Infotypes for Personnel Planning objects that can be related to persons If the object type is specified:· Infotypes for the object type · Infotypes for objects that can be related to the specified object typeIf the object type is not specified:· All infotypes · Infotypes for Recruitment (4000-4999)· Some infotypes for Personnel Administration (such as 0001 and 0002)
· Customer infotypes
Reporting examples · Selection of all persons who participated in a specific business event, output of prices for reserved business events · Selection of all persons assigned to a specific personnel area, output of qualifications held by these persons · Selection of all business events held in London in March, output of all persons who participated in these business events · Selection of all positions assigned to a specific organizational unit, output of all persons assigned to the positions · Selection of all applicants hired last year to work on special projects, output of addresses for the applicants selected
Logical database PNPCE (PNP Concurrent Employment) functions just like logical database PNP. The procedure for creating InfoSets is also the same. It only becomes significant if you work with Concurrent Employment.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the corresponding field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
§ Logical database PNPCE or PNP Personnel number
§ Logical database PAP Applicant number
§ Logical database PCH Object ID, plan version, and object type
6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using Drag&Drop.
7. To save the InfoSet, choose .
8. To generate the InfoSet, choose .
On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
sample code
START-OF-SELECTION.
GET pernr.
rp_provide_from_frst p0000 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0001 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0001-plans. " earliest.
endif.
endif.
rp_provide_from_last p0014 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0014 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0014-LGART. .
endif.
endif.

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

What is the difference between tkprof and explainplan

Hi,
what is the difference between tkprof and explainplan.

Execution Plans and the EXPLAIN PLAN Statement
Before the database server can execute a SQL statement, Oracle must first parse the statement and develop an execution plan. The execution plan is a task list of sorts that decomposes a potentially complex SQL operation into a series of basic data access operations. For example, a query against the dept table might have an execution plan that consists of an index lookup on the deptno index, followed by a table access by ROWID.
The EXPLAIN PLAN statement allows you to submit a SQL statement to Oracle and have the database prepare the execution plan for the statement without actually executing it. The execution plan is made available to you in the form of rows inserted into a special table called a plan table. You may query the rows in the plan table using ordinary SELECT statements in order to see the steps of the execution plan for the statement you explained. You may keep multiple execution plans in the plan table by assigning each a unique statement_id. Or you may choose to delete the rows from the plan table after you are finished looking at the execution plan. You can also roll back an EXPLAIN PLAN statement in order to remove the execution plan from the plan table.
The EXPLAIN PLAN statement runs very quickly, even if the statement being explained is a query that might run for hours. This is because the statement is simply parsed and its execution plan saved into the plan table. The actual statement is never executed by EXPLAIN PLAN. Along these same lines, if the statement being explained includes bind variables, the variables never need to actually be bound. The values that would be bound are not relevant since the statement is not actually executed.
You don’t need any special system privileges in order to use the EXPLAIN PLAN statement. However, you do need to have INSERT privileges on the plan table, and you must have sufficient privileges to execute the statement you are trying to explain. The one difference is that in order to explain a statement that involves views, you must have privileges on all of the tables that make up the view. If you don’t, you’ll get an “ORA-01039: insufficient privileges on underlying objects of the view” error.
The columns that make up the plan table are as follows:
Name Null? Type
STATEMENT_ID VARCHAR2(30)
TIMESTAMP DATE
REMARKS VARCHAR2(80)
OPERATION VARCHAR2(30)
OPTIONS VARCHAR2(30)
OBJECT_NODE VARCHAR2(128)
OBJECT_OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
OBJECT_INSTANCE NUMBER(38)
OBJECT_TYPE VARCHAR2(30)
OPTIMIZER VARCHAR2(255)
SEARCH_COLUMNS NUMBER
ID NUMBER(38)
PARENT_ID NUMBER(38)
POSITION NUMBER(38)
COST NUMBER(38)
CARDINALITY NUMBER(38)
BYTES NUMBER(38)
OTHER_TAG VARCHAR2(255)
PARTITION_START VARCHAR2(255)
PARTITION_STOP VARCHAR2(255)
PARTITION_ID NUMBER(38)
OTHER LONG
DISTRIBUTION VARCHAR2(30)
There are other ways to view execution plans besides issuing the EXPLAIN PLAN statement and querying the plan table. SQL*Plus can automatically display an execution plan after each statement is executed. Also, there are many GUI tools available that allow you to click on a SQL statement in the shared pool and view its execution plan. In addition, TKPROF can optionally include execution plans in its reports as well.
Trace Files and the TKPROF Utility
TKPROF is a utility that you invoke at the operating system level in order to analyze SQL trace files and generate reports that present the trace information in a readable form. Although the details of how you invoke TKPROF vary from one platform to the next, Oracle Corporation provides TKPROF with all releases of the database and the basic functionality is the same on all platforms.
The term trace file may be a bit confusing. More recent releases of the database offer a product called Oracle Trace Collection Services. Also, Net8 is capable of generating trace files. SQL trace files are entirely different. SQL trace is a facility that you enable or disable for individual database sessions or for the entire instance as a whole. When SQL trace is enabled for a database session, the Oracle server process handling that session writes detailed information about all database calls and operations to a trace file. Special database events may be set in order to cause Oracle to write even more specific information—such as the values of bind variables—into the trace file.
SQL trace files are text files that, strictly speaking, are human readable. However, they are extremely verbose, repetitive, and cryptic. For example, if an application opens a cursor and fetches 1000 rows from the cursor one row at a time, there will be over 1000 separate entries in the trace file.
TKPROF is a program that you invoke at the operating system command prompt in order to reformat the trace file into a format that is much easier to comprehend. Each SQL statement is displayed in the report, along with counts of how many times it was parsed, executed, and fetched. CPU time, elapsed time, logical reads, physical reads, and rows processed are also reported, along with information about recursion level and misses in the library cache. TKPROF can also optionally include the execution plan for each SQL statement in the report, along with counts of how many rows were processed at each step of the execution plan.
The SQL statements can be listed in a TKPROF report in the order of how much resource they used, if desired. Also, recursive SQL statements issued by the SYS user to manage the data dictionary can be included or excluded, and TKPROF can write SQL statements from the traced session into a spool file.
How EXPLAIN PLAN and TKPROF Aid in the Application Tuning Process
EXPLAIN PLAN and TKPROF are valuable tools in the tuning process. Tuning at the application level typically yields the most dramatic results, and these two tools can help with the tuning in many different ways.
EXPLAIN PLAN and TKPROF allow you to proactively tune an application while it is in development. It is relatively easy to enable SQL trace, run an application in a test environment, run TKPROF on the trace file, and review the output to determine if application or schema changes are called for. EXPLAIN PLAN is handy for evaluating individual SQL statements.
By reviewing execution plans, you can also validate the scalability of an application. If the database operations are dependent upon full table scans of tables that could grow quite large, then there may be scalability problems ahead. On the other hand, if large tables are accessed via selective indexes, then scalability may not be a problem.
EXPLAIN PLAN and TKPROF may also be used in an existing production environment in order to zero in on resource intensive operations and get insights into how the code may be optimized. TKPROF can further be used to quantify the resources required by specific database operations or application functions.
EXPLAIN PLAN is also handy for estimating resource requirements in advance. Suppose you have an ad hoc reporting request against a very large database. Running queries through EXPLAIN PLAN will let you determine in advance if the queries are feasible or if they will be resource intensive and will take unacceptably long to run.

What is the difference between jdk and jre

what is the difference between jdk and jre
plzz tell me in detail

It's an extremely important skill to learn how to search the web. Not only will it increase your research and development talents, it will also save you from asking questions that have already been answered numerous times before. By doing a little research before you ask a question, you'll show that you're willing to work and learn without needing to have your hand held the entire time; a quality that is seemingly rare but much appreciated by the volunteers who are willing to help you.
If you've done the research, found nothing useful, and decide to post your question, it's a great idea to tell us that you've already searched (and what methodologies you used to do your research). That way, we don't refer you back to something you've already seen.
To get you started, here is an excellent resource: The Java� Glossary

What is the difference between express and extreme?

I am wondering what is the difference between express and extreme and will there be any effect in performance if I am just using it at home?

I am just looking for router that gives me reliable highspeed wi-fi for personal use within my home.
Wireless performance is roughly equal between the two devices, with a slight edge to the Extreme since it uses a bit better antenna package.
If I connect the the hard drive to the extreme, does that mean I can back up all my data wirelessly through the port into my external hard drive?
Yes, if you backup manually, or use an application like Carbon Copy Cloner or SuperDuper.
No, if you were planning to use Apple's Time Machine application since Time Machine backups to a hard drive at the USB port of the AirPort Extreme are not officially supported by Apple.

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What's the difference between thunderbolt and mini displayport?

I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks

@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt...

What is the difference between, DSO and DTP in BI 7.0

Hi Guru's
what is the difference between, DSO and DTP in BI 7.0 , how it will come the data from r/3 to BI 7.0, can u discribe?
points will be assined?
Thanks & Regards,
Reddy.

Hi,
The data will be replicated in the same way as we do in 3.5.
Activating, and Transporting the same DS in BW, and Replicating them in BW from R/3.
First you need to know Diff b/w 3.5 nd 7.0, for that check the below doc's:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
blogs:
/people/sap.user72/blog/2004/11/01/sap-bi-versus-sap-bw-what146s-in-a-name
Re: How to identify Header, Item and Schedule item level data sources?
For Transformations in BI:
http://help.sap.com/saphelp_nw70/helpdata/en/33/045741c0c28447e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/497f42d540d665e10000000a155106/frameset.htm
For DTP:
DTP:
http://help.sap.com/saphelp_nw70/helpdata/en/20/a894ed07e75648ba5cf7c876430589/frameset.htm
For DSO:
Data Store Objects:
http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
Reg
Pra

What is the difference between ojvm and client versions?

Changing the java vm from client to ojvm result in the following error:
Errormessage:
java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm      RUNS OK.
Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
Various version info:
Output from program:
java version:1.4.2_01
java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
java vm version:9.0.3.738 cdov
Taken from JDeveloper Help About:
Oracle IDE     9.0.3.10.35
UML Modelers Version     9.0.3.9.4
Business Components Version     9.0.3.10.7
java.version     1.3.1_02
java.vm.name     OJVM Client VM
java.vm.version     9.0.3.738 o

However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

What is the difference between TO_CHAR and TO_DATE()?

Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') ||     NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
     WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
     AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
          '2','02', '3','03', '4','04', '5','05',
          '6','06', '7','07', '8','08', '9','09',
          'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".

try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
         DECODE(TO_CHAR(SYSDATE, 'MM'),
                '01', '1',
                '02', '2',
                '03', '3',
                '04', '4',
                '05', '5',
                '06', '6',
                '07', '7',
                '08', '8',
                '09', '9',
                '10', 'A',
                '11', 'B',
                '12', 'C') as code
    from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM

What's the difference between sync and back up

Similar Messages

Maybe you are looking for