What's the difference between the CC version and the CC 2014. I suppose we don't need to have them both on the Mac?

Now we have two versions of the same programs, CC and CC 2014. Why is this?

the impression I get from reading around the forums is that 2014 is supposed to be a whole new version, a la CS5 --> CS6. why this is the case is beyond me.

Similar Messages

  • What are the differences between a trial version and a licensed copy of RoboHelp?

    What are the differences between a trial version and a licensed copy of RoboHelp? How is original Robohelp software useful compared to the evaluation version (freely downloaded software)
    Thanks.

    Welcome to the forum.
    The only difference should be that the trial is limited to 30 days use. All functionality works and nothing is watermarked Trial or suchlike.
    The trial of the standalone version allows you to link to FrameMaker documents. It should not and that feature will be disabled if you proceed with the full version. Other than the time limitation, that is the only difference.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • What is difference between 4.6c version and 4.7ee version

    Hello to all,
    Pls, help me.
    what is difference between 4.6c version and 4.7ee version?
    It is urgent tommorow I have an interview.
    thanks & regards,
    raju.

    Hi
    Check these links
    You can find the difference in release notes of each SAP version.
    Here are the links.
    http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    One major difference is that 4.6 runs on what they call the basis layer, in 4.7 the basis layer was majorly modified to include new web technologies, hence the renaming of Basis to Web Application Server. 4.7 runs on the Web Application Server 6.20. With this, was the introduction to BSPs or Business Server Pages.
    Also have a look at the link:
    http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
    Here is a quick short list though:- Statements for character processing have additions IN BYTE MODE and IN CHARACTER MODE, this affects statements like DESCRIBE LENGTH, OPEN DATASET
    Header lines should not longer be used for tables (in OO context this is not even possible)
    TABLES statement in reports should no longer be used
    PNPCE for concurrent employement (new logical DB for HR)
    For OO abap there a plenty of short forms for method calls that were not previously available.
    One very cool feature is that data reference's can have actual data types and van be referenced directly without field symbols.
    Additions to many abap statements, for example there is now a ALL OCCURENCES addition to the replace statement.
    Class based exceptions are now available (although it is debatable how usefull these are seeing as there is no FINALLY part to the try catch statement, very disappointing but maybe that is just me).
    Friends have been introduced for OO abap.
    Dynamic program has plenty of improvements, for example there is now a TYPE TABLE OF variant for create data which lets you dynamically create an internal table with a structure type, your can also now call a class constructor with different importing parameters dynamically.
    Regards
    Kiran

  • Difference between 4.7 version and 6.0 version

    what is the difference between 4.7 version and 6.0 version particularly as far as SD is concerned?

    dear vinayak
    There are so many differences between the version in different objects
    I will explain in two or more objects the difference
    1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
    and also there is no CIN tab in that version
    but it is there in the 4.7 EE version
    This is the major change from the 4.6cc to 4.7EE
    2. in 4.7EE there is some settings that are related for CIN
    which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
    But we can do the same in the 6.0 version
    These are the some of the settings that are differed in the two versions and in that two objects
    Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
    Re: SAP version differences 4.5b, 4.6c and ECC6.0
    You can find the difference in release notes of each SAP version.
    Here are the links.
    http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    rewards if it helps
    siva

  • Is there a difference between LR4 full version and the upgrade.

    I purchased the upgrade for LR4. I now have LR3. I want to download and install now and them put in the serial number to license it when it arrives. Is there a difference between installing the full version and the upgrade version. I don't want to screw up my catalog or anything else for that matter.

    There is no difference and you're actually better off downloading and installing rather than installing a shipped version. The download will likely be newer.

  • Difference between UCOS restricted version and unrestricted version

    Hi to all,
    somebody knows which is the difference between restricted version and unrestricted version??
    Which are the main differences??
    Thanks
    David

    Hi.
    Basically restricted version has encryption enabled and unrestricted not.
    You may give a look to this thread.
    https://supportforums.cisco.com/discussion/11409366/restricted-version-and-unrestricted-version-ccm-comparison
    HTH
    Regards
    Carlo

  • Difference between ASA 8.3 and 8.4 IOS VERSION?

    What are major differences between ASA 8.3 and 8.4 IOS VERSION?
    Also data flow?

    The release notes outline the differences in each version of ASA software. You can find the ASA 8.4 Release Notes here.
    I don't understand what you're asking about data flow.

  • What is difference between  Service map iview and Workset Map iview

    Hi Experts,
                        Can anyone tell me the difference between  service map iView and Workset Map iView.
    When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
    Thanks in Advance
    Janardhan

    Hi,
    Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
    Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
    if you want to more info pls go thr the below thread
    Workset Map iView
    i hope it will help you
    Thanks,
    Sreeni.

  • Difference between fully qualified name and Canonical name

    CAn annyone xplain Difference between fully qualified name and Canonical name

    If you dont know then don't replyYou were given a link directly to the answer. The state of my knowledge is therefore (a) irrelevant and (b) not proven by anything in this thread.
    Who asked [you] to reply
    You* did, when you posted here.
    I know how to get from java language specificationClearly not, or you wouldn't still be posting here.
    I need clarification for what is in java lang specification..It seems clear enough to me. What part of "A member class or member interface M declared in another class C has a canonical name if and only if C has a canonical name. In that case, the canonical name of M consists of the canonical name of C, followed by ".", followed by the simple name of M." didn't you understand?

  • Difference between 4.7 EE and 4.6 C

    hi to all
    Me ravi kumar. pl explain my doubts
    what is exact difference between 4.7 EE and 4.6C?
    What is cut over activities?
    thank u
    with regards
    ravi kumar

    Hi,
    Pl. follow the link,
    http://www.thespot4sap.com/articles/SAP_4point7_Features_Benefits.asp
    Regards,
    Senthilkumar SD

  • Difference between one step approval and N-step approval?

    Hi Experts,
    Can anyone tell what is major difference between one step approval and N step approval?
    I guess its only one person will  approve incase  one step  approval and where as in the N-step approval a shopping cart can be approved by many  users under some prerequistes right??
    can some one provide me some hints on this.....
    how does it make a difference in workflows and how to mantain the settings for this in the SPRO. for this one to setup  a one-step and N-step approvals.  what are points to be taken care while setting up this?
    Please can some one clarify me on this
    Regards
    Sairam.
    I

    Hi,
    1 step approval - Number of approvals will be 1
    n step - number of approvals  greater then 2(since std approval workflow present till 2 level)
    The general customising steps for Workflows  apply to both of them (like SWU3 customising.event linkage etc) but other then that for,
    1 step approval -
    -->Need to activate the starting conditions
    -->Agent assignment to be done seperately for the Approval task
    (Also the N step workflow can be used as 1 step workflow with number of approvals being set to 1 through the Logic in the badi.)
    N step approval -
    -->to be implemented through BADI BBP_WFL_APPROV_BADI .This BADi actually determines the Agents/approvers for the workflow.
    -->As per  my exp,this workflow is very unstable and for few  updates,you may have to apply number of notes(e.g. Approval status not updated properly,graphical preview not visible properly etc)
    BR,
    Disha.
    Do reward points for  useful answers.

  • What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

    Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
    So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
    All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
    I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff" 
    O.o
    A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
    Here is a summarized history of my relationship with Wine:
    Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
    'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
    Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
    So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

    ## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
    For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
    If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
    http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
    The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
    For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
    First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
    Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
    Third, you will need to get MacPorts and configure it. The tutorial should have this data.
    When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
    After obtaining wine, to run a program, open the terminal.app window.
    cd desktop/XYZ/ZYZ\ WRQ
    The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
    wine th11e.exe
    Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
    It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
    If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

  • What's the difference between AIA 3.0 and AIA FP 11g Release 1 (11.1.1.4.0)

    Hi, experts,
    Have a question need your great help and clarification, you know we have Oracle AIA Foundation Pack 2.5 based on SOA 10.1.3.4 installation, the new release for SOA has been released on this version Oracle Fusion Middleware 11g R1 (11.1.1.4.x) Released the other day, within this version, we have a Foundation Pack 11g Release 1 (11.1.1.4.0) based on SOA11g.
    My questions are as below
    1) What's difference between AIA 3.0 and Foundation Pack 11g Release 1 (11.1.1.4.0)?
    2) We know, on the top of AIA 2.5, we have Foundation Pack 11g Release 1 (11.1.1.2.0) and Foundation Pack 11g Release 1 (11.1.1.4.0), doesn't mean that the Foundation Pack 11g Release 1 (11.1.1.4.0) has another nickname that is AIA3.0?
    3) Does anyone provide AIA 3.0 installation and implementation guide?
    Appreciated if you could provide some suggestions or comments based on above question, thanks in advance!

    Please see the answers below...
    #1 . AIA 3.0 is internal project name, AIA 11g R1 is an official release which is 11.1.1.2.0, then after two patch sets released they are 11.1.1.3.0 and 11.1.1.4.0
    #2 hope the above answered your question.
    #3 AIA 11g R1 x install and developer guides available on OTN.
    Regards,
    Narayana

  • What is the difference between SQL Server 2012 R2 & SQL Server 2014

    Hi all,
     I am using SQL Server from last 3 years. I started SQL Server 2008 R2. Now I am using SQL Server 2012. I want to change my development environment to SQL Server 2012 R2. But suddenly I saw that SQL Server 2014 is released. I want to know what are the
    differences between SQL Server 2012 R2 & SQL Server 2014. Are both those are the same or different products?
    I searched through the Internet but I didn't find any article regarding that. So could someone help me to solve this matter?
    Thanks,
    Regards,
    Chiranthaka

    differences between SQL Server 2012 R2 & SQL Server 2014.
    We don't have a Version "SQL Server 2012 R2", only 2005, 2008, 2008R2, 2012 and 2014.
    See MSDN What's New in SQL Server 2014
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • What is the difference between ERS Transactions MRRS and MRRL ?

    Hi Experts,
    What is the difference between ERS Transactions MRRS and MRRL ? (in terms of posting the documents as well)
    Thank You,
    Nagarjuna Palnati

    Hi,
    In MRRS-You dont have the option of clearing Delivery costs.
    MRRL- you can settle the GR + Planned delivery costs.
    In ECC6.0 version you also have the option of settling delivery costs only for the frieght vendor using tcode MRDC.(Additional reqt-
    In custmizing for LIV you should enter the vendor for whom you will clear using MRDC)
    Reg,
    Deepak.

Maybe you are looking for

  • How do I select more than one photo for a contact sheet

    I am trying to print more than one photo per contact sheet (to save photo paper!) Iphoto help says to select the photos you want on the contact sheet and also to select how many photos you want on the "options" button on the contact sheet style selec

  • Windows 8.1 and MSN Premium glitch

    I've installed the Windows 8.1 update. My MSN Premium email was not working correctly. I copied my saved emails and uninstalled Premium. I've been trying to reinstall and I get error code 37 the sign-up servers are experiencing difficulty. I just ins

  • Insert Table

    Hi. I'm working on an assignment, and I added a table that can't seem to move out of a certain region of the page. I opened up a Word document, and was able to move the table anywhere I liked. Is there a way I can move my chart outside of these bound

  • Computer crashed due to virus.  If I do a factory reset my itunes will be gone.  When I load it back, will I have lost everything?

    My computer got a virus today.  I will likely need to do a factory reset.  If I do this and have to reload itunes, will I lose everything and have to load everything back?  How will this affect my ipod touch, which is backed up nightly to cloud?

  • How can I use my custom thumbnails with lightbox widget?

    I have been trying to find the answer to this for a couple of days. I did see one thread about this, but it didn't really answer the question. I don't want my thumbnail images to be miniature versions of my hero image. I have created custom thumbnail