What's the difference between using and 802.11a and 5GHz only?

What's the difference between using "802.11n (802.11a compatible)" and "802.11n only (5GHz)" modes on the Airport Extreme?

802.11a gives you 802.11g speeds but using 5GHz (54mbps
802.11n gives you 144Mbps (600 peak) at 2.4GHz or 5GHz

Similar Messages

  • What's the difference between using a connection pool and a datasource

    Howdy. I figure this is a newbie question, but I can't seem to find an
    answer.
    In the docs at bea, the datasource docs say
    "DataSource objects provide a way for JDBC clients to obtain a DBMS
    connection. A DataSource is an interface between the client program and the
    connection pool. Each data source requires a separate DataSource object,
    which may be implemented as a DataSource class that supports either
    connection pooling or distributed transactions."
    In there it says the datasource uses the connection pool, but other than
    that, what is the difference between a connection pool and a datasource?

    Thanks for the info. I think it makes some sense. But it's a bit greek.
    I'm sure it'll make more sense the more I work with it. Thanks.
    "Chuck Nelson" <[email protected]> wrote in message
    news:3dcac1f5$[email protected]..
    >
    Peter,
    Here is a more formal definition of a DataSource from the Sun site
    "A factory for connections to the physical data source that thisDataSource object
    represents. An alternative to the DriverManager facility, a DataSourceobject
    is the preferred means of getting a connection. An object that implementsthe
    DataSource interface will typically be registered with a naming servicebased
    on the JavaTM Naming and Directory (JNDI) API.
    The DataSource interface is implemented by a driver vendor. There arethree types
    of implementations:
    Basic implementation -- produces a standard Connection object
    Connection pooling implementation -- produces a Connection object thatwill automatically
    participate in connection pooling. This implementation works with amiddle-tier
    connection pooling manager.
    Distributed transaction implementation -- produces a Connection objectthat may
    be used for distributed transactions and almost always participates inconnection
    pooling. This implementation works with a middle-tier transaction managerand
    almost always with a connection pooling manager.
    Does that help clarify the distinction?
    Chuck Nelson
    DRE
    BEA Technical Support

  • What is the difference between Safari 5.1.7 and 5.1.10? I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

    what is the difference between Safari 5.1.7 and 5.1.10?
    I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

    Might be the security fixes >  Safari 5.1.10 for Snow Leopard

  • What is the difference between SAP NW PI7.1 and PI7.1 EHP1

    We have a customer using SAP PI7.1 EHP1. The application to be deployed
    isdeveloped on SAP Netweaver PI 7.1 SP06.
    We need to know if application developed and transported from PI7.1 is
    compatible with EHP1?
    Below are the Components used by the application .
    1) SSL communication using SOAP adapter
    2) Java mapping , Graphical mapping , XSLT mapping
    3) Customised EJB modules
    4) Adapter framework
    5) ALE layer for IDoc communication from ERP to PI
    6) RFC lookups to PI system and ERP system.
    Questions
    1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
    2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
    Regards,
    Sneha

    Hi,
    EHP Pi7.1 new
    IPv6 Support in SAP Systems (new)
    Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
    High Availability (New)   Locate the document in its SAP Library structure
    Use
    A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
    [Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
    Message Packaging (New)
    Monitoring Milestones (New)   Locate the document in its SAP Library structure
    Use
    You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
    check  given Link
    http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
    Regards,
    Amit

  • What is the difference between component(Y, Pb, Pr) and component(R,G,B)?

    [I previously posted this question in another thread as hadn't realised how to post new question]
    Q. What is the difference between component (Y, Pb, Pr) and component (R,G,B) ?
    I’d previously thought I was reasonably savvy on all things HD, but when I turned my thoughts to looking into getting a mac mini to run part of my home cinema I realise I have some confusions around the above.
    Here’s what I think I know:-
    The mac mini has a DVI output of the type which can output both digital and analogue, and so via physical adapters it could be used to connect to displays that take HDMI or VGA style RGB leads.
    I know on the market I can get a DVI to Component cable lead which would therefore lead me to assume it could drive my HD plasma with component input (Y,Pb,Pr), as I currently drive the HD TV via component cable with a SKY HD box (720p and 1080i), an xbox 360 (720p) and a progressive scan DVD player (480p), all through a Denon AV-amp.
    The problem is, I’ve heard somewhere that the DVI to component is R,G,B only and that it is not Y, Pb, Pr which is making me wonder it a) this will work and b) if I really understand component video afterall.
    I notice the Apple TV outputs Y,Pb,Pr but colours them red, green and blue, so am even more confused….
    Hopefully someone can help educate me on this !

    Thanks for this.
    My Plasma is a Panasonic 42" Viera March 2005 model. No HDMI, No VGA.
    It can process signals up to 720p and 1080i via the component (an interestingly it makes a huge difference over SD even though the native panel is 480..!?!)
    Am I right in thinking that the iPod component cable will also be R,G,B and therefor might be a suitable trial? Ie. if the TV accepts the input from the iPod then it should work for the mini?
    Only other thing of note is I'm doing all this via my Denon 1707 AV amp which does have the facility of upscaling, but I imagine it needs to stick to one format?
    Thanks.

  • What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?

    Hi,all!
    What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?
    Why there have two JRE? Which one we should use?

    JRE - Java Runtime Enviroment, what you stick on the end-user computers - http://www.java.com
    SDK - Software Development Kit (aka JDK - Java Developer Kit) - http://java.sun.com

  • What's the difference between e.g. dialog listbox and regular listbox?

    What's the difference between e.g. dialog listbox and regular listbox?

    Dialog controls use platform specific drawing functions and cannnot be customized (change the color, etc). They often assume specific system colors.
    For example, place a dialog list box and a regular list box on your front panel. Now go to your Display control panel in windows and change the color scheme in the appearance tab. You will see that the dialog list box will change the color according to the selected scheme while the regular list box remains the same.
    Now use your labview color tool and try to change the color of each. You will be able to change the color of the regular list box, but not of the dialog list box.
    Functionally they are the same, the differences are cosmetic.
    LabVIEW Champion . Do more with less code and in less time .

  • What's the difference between Flash Builder 4.5 and Flash Builder 4.7?

    Hi everybody!
    Could you help me?
    this is my question:
    What's the difference between Flash Builder 4.5 and Flash Builder 4.7?
    I'm going to develope a new app using Flash Builder 4.5 but the new version is available... What could I wait about it?

    The only listed change is the addition of support for the new Nike + iPod system (more information about the Nike products can be found here).

  • What is the difference between sales order with picking and without picking

    hi friends,
    i would like to know what is the difference between sales order with picking and without picking.
    thanks
    skrishnan

    Hello,
    Picking refers to preparing the right quantity and quality of goods for shipping on schedule as required by the customer.
    Once picking is configured, SAP Sd automatically generates picking lists and picking labels which can be tagged to the relevant goods. SAP can be configured to ensure that picked quantity is confirmed before goods are issued. This can be done using transaction code VSTK. In T-code VSTK, picking confirmations can be set, which ensure that goods picked for delivery are in accordance with picking slips.
    Picking thus helps in monitoring each item using the picking status. Picking is normally done in SAP SD by a shipping clerk.
    Prase

  • What's the difference between batch class type 022 and 023?

    Hi Guys,
    I find that some of my SAP client only have class 022 and some have 023, but no client has  them all. I don't know why it happed.
    So what's the difference between batch class type 022 and 023?  Which setting decide which class to be used ?
    Thanks.

    Hi nitin,
    Read  http://www.sapfans.com/forums/viewtopic.php?t=212819&highlight=022  you will know the difference between 022 and 023 .
    Use tcode OMCT you can switch batch level .

  • What's the difference between old SAP appraisal system and the new SAP appraisal system?

    Hi Experts,
    What's the difference between old SAP appraisal system and the new SAP appraisal system?
    Can anyone shed some light please.
    Thanks.

    emgr_update no longer sets or gets the thesaurus from workbench. In 11 all workbench configurations are saved in IFCR configuration directly.
    Hence the thesaurus entry should be added directly in version 11 Workbench as opposed to xml file in older versions.
    And if you want to migrate the changes across environments then import_site script in control directory can be used.

  • What is the difference between a tablespace, a segment and an extent ?

    What is the difference between a tablespace, a segment and an extent ? Please explain in layman terms since I'm a total newbie to Oracle.
    Regards
    Gony

    Hi,
    These are logical structure of database
    1. Tablespace : A database is divided into logical storage units called tablespaces, which group related logical structures together. For example, tablespaces commonly group together all application objects to simplify some administrative operations.
    2.Segments
    Above extents, the level of logical database storage is a segment. A segment is a set of extents allocated for a certain logical structure. The following table describes the different types of segments.
    Segment Description
    Data segment
    Each nonclustered table has a data segment. All table data is stored in the extents of the data segment.
    For a partitioned table, each partition has a data segment.
    Each cluster has a data segment. The data of every table in the cluster is stored in the cluster's data segment.
    Index segment
    Each index has an index segment that stores all of its data.
    For a partitioned index, each partition has an index segment.
    Temporary segment
    Temporary segments are created by Oracle when a SQL statement needs a temporary work area to complete execution. When the statement finishes execution, the extents in the temporary segment are returned to the system for future use.
    Rollback segment
    If you are operating in automatic undo management mode, then the database server manages undo space using tablespaces. Oracle Corporation recommends that you use "Automatic Undo Management" management.
    3. Extents
    The next level of logical database space is an extent. An extent is a specific number of contiguous data blocks, obtained in a single allocation, used to store a specific type of information.

  • Ipad mini-What is the difference between (ASSISTED GPS) & (ASSISTED GPS AND GLONASS)

    Ipad mini-What is the difference between (ASSISTED GPS) & (ASSISTED GPS AND GLONASS)

    Khairulnizan Kasim wrote:
    Thanks Meg St._Clair , anyway i've read some articles says, the only A-GPS device is using either mobile network or Wi-Fi for location service, so i believe if using it while flying, it couldn't detect the location, but with GLONASS, it will, because it is an alternative GPS System. I dont know, maybe im wrong.
    A-GPS is real GPS. It stands for Assiseted GPS. The iPads with cellular have a GPS. They use WiFi and cellular to assist the GPS in locking on more quickly. The GPS is assisted by the WiFi and cellular. It will work just fine while flying.
    WiFi ony iPads rely on WiFi for location services. They will not work while flying.

  • What is the difference between MOVE var1 TO var2 and var2 = var1? Help!

    Hi Experts,
        What is the difference between MOVE var1 TO var2 and var2 = var1?
    Thanks
    Gopal

    Gopal,
      pls. look into it.Good explanation on you requirement.
    To assign the value of a data object <f1> to a variable <f2>, use the following statement:
    MOVE <f1> TO <f2>.
    or the equivalent statement
    <f2> = <f1>.
    The contents of <f1> remain unchanged. <f1> does not have to be a variable - it can also be a literal, a text symbol, or a constant. You must always specify decimal points with a period (.), regardless of the user’s personal settings.
    Multiple value assignments in the form
    <f4> = <f3> = <f2> = <f1>.
    are also possible. ABAP processes them from right to left as follows:
    MOVE <f1> TO <f2>.
    MOVE <f2> TO <f3>.
    MOVE <f3> TO <f4>.
    In the MOVE statement (or when you assign one value to another with the equal sign), it is not possible to specify the field names dynamically as the contents of other fields. If you need to do this, you must use field symbols .
    There are three possible outcomes of assigning <f1> to <f2>:
    The data objects <f1> and <f2> are fully compatible, that is, their data types, field length, and number of decimal places are identical. The contents of source field <f1> are transferred byte by byte into the target field <f2> without any further manipulation. The MOVE statement is most efficient when this is the case.
    The data objects <f1> and <f2> are incompatible. This is the case, for example, if the two fields have the same type, but different lengths. The contents of the source field <f1> are converted so that they are compatible with the data type of <f2>, and are then transferred. This procedure only works if a conversion rule exists between the data types of <f1> and <f2>. Type conversions make the MOVE statement less efficient. How much less efficient depends on the individual conversion.
    The data objects <f1> and <f2> are incompatible, and no conversion is possible. The assignment is not possible. If this can be recognized statically, a syntax error occurs. If it is not recognized before the program is run, a runtime error occurs.
    The source and target fields can be of different data types. In contrast to other programming languages, where the assignment between different data types is often restricted to a small number of possible combinations, ABAP provides a wide range of automatic type conversions.
    For example, the contents of a source field with an elementary data type can be assigned to a target field with any other data type. The single exception to this rule is that it is not possible to assign values between type D fields and type T fields. ABAP even supports assignments between a structure and an elementary field, or between two structures.
    DATA: T(10) TYPE C,
          NUMBER TYPE P DECIMALS 2,
          COUNT  TYPE I.
    T = 1111.
    MOVE '5.75' TO NUMBER.
    COUNT = NUMBER.
    Following these assignments, the fields T, NUMBER, and COUNT have the values ‘1111      ’, 5.75, and 6 respectively. When you assign the number literal 1111 to T, it is converted into a character field with length 10. When you assign NUMBER to COUNT, the decimal number is rounded to an integer (as long as the program attribute Fixed pt. arithmetic has been set).
    Pls. reward if useful

  • What is the difference between "UDP Multicast open.vi " and "UDP open.vi " ?

    What is the difference between "UDP Multicast open.vi " and "UDP open.vi " ?

    Someone correct me if i am wrong, the difference is "multicast"
    -Based on my General Computer Network knowledge, multicast means sending data/packets to selected group of nodes. Which will be UDP multicast
    -UDP open.vi might be for unicast which is to one node specifically.
    -One more difference is in first one(multicast open), you have additional read,write and read write funcionality which is not available in normal UDP open.vi
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

Maybe you are looking for

  • Error while installing NW for abap free trial on SLES

    The error I get after entering new passwords for n4sadm etc: unpacking /root/Desktop/server/TAR/x86_64/SAPDB_I.tar.bz2 tar: /root/Desktop/server/TAR/x86_64/SAPDB_I.tar.bz2: Cannot open: No such file or directory tar: Error is not recoverable: exiting

  • Parrallels/ VMWare with Windows 7 64 bit from Free Source (Installing)

    I am still a rather new Mac user and making the transition from Windows.  Unfortunately, there are numerous, small programs that I am still relying on that is virtually only compatable with Windows (using wineskin seems unstable for these programs). 

  • Can we import/ embed HTML objects in a keynote presentation?

    Hi, I am using FusionCharts to create rich and dynamic charting for my presentation. FusionCharts is based on a Javascript liberary, can I import the generated charts as HTML objects in Keynote? If yes, how? Thanks

  • I can't switch on my mac. the logo changes to a cancel sign and hangs

    I've been using my mac for a year and a half already and this is the first time I'm faceing this problem. Can I do something about this myself or do I have to go to the store to get this fixed?

  • Downconver​t 2009 / 2010 to 8.5

    Could someone help to downconvert following two files (attached) to Version 8.5 ? Many thanks - DAQmx IO State Machine.vi (from 2009 to 8.5) - State Type def.ctl (from 2010 to 8.5) Thanks Vincent Solved! Go to Solution. Attachments: DAQmx IO State Ma