What's the difference with Kind and Media Kind in smart playlists ??

lol i've just discovered Media Kind. so what's Kind ??
what's the difference ? 'cos i've been using Kind all along (although it never seems to work how i wished it to) i guess now i know why....
what's kind

Hi,
Kind is file type - eg AAC audio file, MPEG audio file
Media kind indicates whether it is Music, Audiobook, etc
Jim

Similar Messages

What's the difference with iMessage and SMS when not on wifi?

What's the difference when I use iMessage vs SMS? I know iMessage is only to Apple products. So when my messages uses iMessage when I'm not connected to wifi, would it go onto my data or texting? Thanks

what if people dont know how to do that.
sberman wrote:
Here's one way to test:
Settings > Messages > Send as SMS = "Off", and Settings > WiFi = "Off"
Send a message to an Apple user. If it goes, it would be sent via iMessage. If it doesn't go, your carrier does not support iMessage.
Another way is to send a message to an Apple user with just Settings > WiFi = "Off".
If it's blue or the message says "iMesage" at the top, it went via iMessage.
If it's green, it went via SMS text message.
Good luck!

What is the Difference with FMLE 3.1 and 3.2? having problems with my stream

What is the difference with FMLE 3.1 and 3.2?
I am having major problems with my live stream, i am currently using FMLE 3.1 and using a Imac computer.
The stream seems to be delayed by 20mins and keeps on crashing
I have a 2MB upload speed and frame rate 25.00 and bit rate 800 kbps fromat VP6
Can anyone help me with getting the settings right and what is the best computer to use to allow FMLE not to crash and stream to run smooth?
Please Help
Thank you

Hello!
I would be interested in helping you with your question. You are going to need to provide a little more information about your current configuration in order for me to better understand your issue. Until then, I'll do my best to answer your quesitons.
There are subtle changes from 3.1 to 3.2. Both are stable releases. With your setup, you should be using 3.2.
Issues with FMLE typically deal with your capture card. The issues you are having sound like a streaming server issue. Stream delayed 20min? This isn't typical behavior. What streaming media server are you usign? FMS or Wowza? Define 'crashing'. Anything in the output log in FMLE or is your server 'crashing'.
Thank you,
Stephen Apple
Independent Broadcast

What is the difference between OCIEnvCreate and OCIEnvNlsCreate with utf16

because i find a oci sample code cdemouni.c,in this sample,use OCIEnvCreate with mode set OCI_UTF16,but OCIEnvNlsCreate also can set charset and ncharset OCI_UTF16ID,what is the difference between OCIEnvCreate and OCIEnvNlsCreate with UTF16?

First, OCIEnvNlsCreate() is recommended way of switching to UTF-16 mode.
Second, OCIEnvNlsCreate() uses new semantics for bind and define buffer lengths. With new semantics all lengths are in bytes. With old semantics,
UTF-16 string lengths are in codepoints, while other character sets use bytes.
You can get new length semantics with OCIEnvCreate() as well, by
adding OCI_NEW_LENGTH_SEMANTICS to the 'mode' flags.
-- Sergiusz

What is the difference with trail version of elements 12 and the full version elements 12

what is the difference with the trail version of elements 12 and the full version of elements 12

there is no functional difference between trial and the paid version of Photoshop Elements. There has never been any difference except the prompt that you see on every launch to register would go away

What's the Difference Between OLAP and OLTP?

HI,
What's the difference between OLAP and OLTP ? and which one is Best?
-Arun.M.D

Hi,
The big difference when designing for OLAP versus OLTP is rooted in the basics of how the tables are going to be used. I'll discuss OLTP versus OLAP in context to the design of dimensional data warehouses. However, keep in mind there are more architectural components that make up a mature, best practices data warehouse than just the dimensional data warehouse.
Corporate Information Factory, 2nd Edition by W. H. Inmon, Claudia Imhoff, Ryan Sousa
Building the Data Warehouse, 2nd Edition by W. H. Inmon
With OLTP, the tables are designed to facilitate fast inserting, updating and deleting rows of information with each logical unit of work. The database design is highly normalized. Usually and at least to 3NF. Each logical unit of work in an online application will have a relatively small scope with regard to the number of tables that are referenced and/or updated. Also the online application itself handles the majority of the work for joining data to facilitate the screen functions. This means the user doesn't have to worry about traversing across large data relationship paths. A heavy dose of lookup/reference tables and much focus on referential integrity between foreign keys. The physical design of the database needs to take into considerations the need for inserting rows when deciding on physical space settings. A good book for getting a solid base understanding of modeling for OLTP is The Data Modeling Handbook: A Best-Practice Approach to Building Quality Data Models by Michael C. Reingruber, William W. Gregory.
Example: Let's say we have a purchase oder management system. We need to be able to take orders for our customers, and we need to be able to sell many items on each order. We need to capture the store that sold the item, the customer that bought the item (and where we need to ship things and where to bill) and we need to make sure that we pull from the valid store_items to get the correct item number, description and price. Our OLTP data model will contain a CUSTOMER_MASTER, A CUSTOMER_ADDRESS_MASTER, A STORE_MASTER, AN ITEM_MASTER, AN ITEM_PRICE_MASTER, A PURCHASE_ORDER_MASTER AND A PURCHASE_ORDER_LINE_ITEM table. Then we might have a series of M:M relationships for example. An ITEM might have a different price for specific time periods for specific stores.
With OLAP, the tables are designed to facilitate easy access to information. Today's OLAP tools make the job of developing a query very easy. However, you still want to minimize the extensiveness of the relational model in an OLAP application. Users don't have the wills and means to learn how to work through a complex maze of table relationships. So you'll design your tables with a high degree of denormalization. The most prevalent design scheme for OLAP is the Star-Schema, popularized by Ralph Kimball. The star schema has a FACT table that contains the elements of data that are used arithmatically (counting, summing, averaging, etc.) The FACT Table is surrounded by lookup tables called Dimensions. Each Dimension table provides a reference to those things that you want to analyze by. A good book to understand how to design OLAP solutions is The Data Warehouse Toolkit: Practical Techniques for Building Dimensional Data Warehouses by Ralph Kimball.
Example: let's say we want to see some key measures about purchases. We want to know how many items and the sales amount that are purchased by what kind of customer across which stores. The FACT table will contain a column for Qty-purchased and Purchase Amount. The DIMENSION tables will include the ITEM_DESC (contains the item_id & Description), the CUSTOMER_TYPE, the STORE (Store_id & store name), and TIME (contains calendar information such as the date, the month_end_date, quarter_end_date, day_of_week, etc).
Database Fundamentals > Data Warehousing and Business Intelligence with Mike Lampa
Search Advice from more than 250 TechTarget Experts
Your question may have already been answered! Browse or search more than 25,000 question and answer pairs from more than 250 TechTarget industry experts.

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

What are the differences between inactive and active ABAP objects?

Can anybody tell me what are the differences between inactive and active ABAP objects?
In my opinion, an active object is compiled and system wide available, that means the system do not have to compile the program again before run or use the object. While An inactive object is not system wide available and every time you run an inactive object, firstly the abap runtime will have to generate a tempory runtime object and this inactive object can not seen by others.
Am I right? Can anybody kindly tell me other differences?

Hi,
"When it is inactive, it is like it would not exist at all:" no - it's like it only exists to you
"If we just saved that one means it is stored in application server not in database": no - the inactive version is also stored in the database. You can log off and log on and it will still be there, in its inactive status.
"Only active objects can be executed.": no - inactive objects can be executed by you
When you create or modify a program, it is inactive until you activate it.
With a change, there are two versions of the program stored in the database - the active version (as it was before you made your change), and the inactive version. If you attempt to run the program, you'll run the inactive version - the one with your changes. Everyone else on the system will run the active version.
In this way, you can make changes without affecting anyone else.
Once you activate your program, then the inactive version becomes the active version.
With a create, there is no active version, until you hit the activate button. This means ONLY you can run the program.
An additional benefit of this model, is that if you make a change, save it, and then change your mind without activating, you can recover the active version into the editor, using version management.
A downside is that sometimes you have to activate your change before you can test it, if it interacts with other, active, programs.
Regards,
Kumar

What is the difference between DSo and Infocube

Hello,
Kindly tell me what is the difference between DSO and Infocube?
And please tell me how to take the desicion that in whichi case we can use DSO and in which case we can use Infocube..

Hi ,
DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
This data can be evaluated using a BEx query.
A DataStore object contains key fields (for example, document number/item) and data fields that can also contain character fields (for example, order status, customer) as key figures. The data from a DataStore object can be updated with a delta update into InfoCubes and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Use
The cumulative update of key figures is supported for DataStore objects, just as it is with InfoCubes, but with DataStore objects it is also possible to overwrite data fields. This is particularly important with document-related structures. If documents are changed in the source system, these changes include both numeric fields, such as the order quantity, and non-numeric fields, such as the ship-to party, status and delivery date. To reproduce these changes in the DataStore objects in the BI system, you have to overwrite the relevant fields in the DataStore objects and set them to the current value. Furthermore, you can use an overwrite and the existing change log to render a source delta enabled. This means that the delta that is further updated to the InfoCubes, for example, is calculated from two successive after-images.
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
Hope this helps,
Regards,
CSM Reddy

What is the difference between APL and UAFL?

Hi There,
Can someone please tell me the difference between APL and UAFL?
As per my understanding APL stands for Automated Predictive Analysis and these are the set of algorithms which SAP inherited with the acquisition of KXEN and APL is enabled from SP9 onwards.
So what is the difference between APL and UAFL?
Can someone answer this?
Regards,
Arjun

Dear Arjun,
the main differences beetween AFL and APL are coming from the A of APL: Automated.
Both AFL and APL can be used the same way (integrated into application), but the APL are Automated algorithms that are coming from InfiniteInsight technology. They give you the opportunity to perform advanced classification, clustering, regression, etc... without deep knowledge in predictive algorithm or data enconding as well. On the contrary, using AFL requires that you choose the right algorithm for answering your question, then set the specific parameters for that particular algorithm (ie: you now the algorithm and how to play with), you have to encode by yourself all the existing variable into the numerical space and handle by yourself binning, banding, missing values and outliers. All those mandatory steps are done Automatically using the APL algorithms.
Kind regards,
Gaëtan.

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What's the difference between thunderbolt and mini displayport?

I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks

@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt...

What is the difference between TO_CHAR and TO_DATE()?

Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') ||     NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
     WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
     AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
          '2','02', '3','03', '4','04', '5','05',
          '6','06', '7','07', '8','08', '9','09',
          'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".

try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
         DECODE(TO_CHAR(SYSDATE, 'MM'),
                '01', '1',
                '02', '2',
                '03', '3',
                '04', '4',
                '05', '5',
                '06', '6',
                '07', '7',
                '08', '8',
                '09', '9',
                '10', 'A',
                '11', 'B',
                '12', 'C') as code
    from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

What is the difference between ws_upload and gui_upload

what is the difference between ws_upload and gui_upload
what is the difference between ws_download and gui_down load
pls tell briefly

Hi Kuamr,
UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Hope this resolves your query.
Reward all the helpful answers.
Regards

What's the difference between SNC and SRM?

we will sell SNC in Q2.But i don't know what is the difference between SNC and SRM.
i've heard SNC suit Direct procurement better than SRM...
Pls give me the advice and information.
good regards kenji

Hi Kenji,
SRM is more of Supplier Identification and SNC work of building
relationship with Supplier starts after this Supplier identification.
SNC is very Good tool to handover Inventory replenishemnt
to Suppliers and it gives Visibility of inventory information over Web UI.
SNC has many processes like PO Collaboration, SMI, DR,DCM, SNI,
Invoice Collaboration,Release process...to accomplish above mentioned task.
SNC is designed for direct materials procurement.
SRM has contract negotiations,bids,auctions for sourcing to identify suppliers
SRM is good for basic purchasing fuctionality and suitable for indirect materials.
In addition to all these SNC has Customer Collaboration functionality also.
Regards,
Vasu

What's the difference with Kind and Media Kind in smart playlists ??

Similar Messages

Maybe you are looking for