What's the easiest way to end workout?

When ending workout does everyone hit pause, menu, end workout. If you use an arm band, clip when you hit pause, the announcement says "Pause Workout", but if you follow the instructions in the manual, it says to stop workout, hit Menu, End Workout. That's fine and good, but I wish it would voice over to tell you that you hit the button. I missed the button and the chart when downloaded showed my pace as walking at the end with a higher mile pace.
I guess I'll pause first for future runs, take off the arm band and then end workout.

you can checkout this post on the easiest way to end your workout w/o it effecting your stats:
http://discussions.apple.com/thread.jspa?threadID=562833&tstart=0
basically you can just hit the pause button on the nano and your workout will be paused. then you can hit the menu button and end your workout whenever it is convenient. or just hit the pause buttin again to resume your workout.

Similar Messages

What is the easiest way to transfer a large imovie project from one computer to another in a different location.

What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

OK it depends.
If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
https://discussions.apple.com/docs/DOC-4141

What's the easiest way to cut out about 20 seconds (in the middle) of a minute+ vid that i made on and downloaded from my iPhone 6

Hi - I'm a vid beginner, actually have a training session tomorrow at an App Store, but for now...what's the easiest way to cut out about 20 seconds (in the middle) of a minute plus vid that i made on and downloaded from my iPhone 6? I I'mported the clip to iPhoto on my new Macbook pro. The TRIM function in iPhoto seems only to want to let me cut from either end. I guess if I do cut out a section in the middle, maybe 'glueing' the sections back together is too much for iPhoto to handle (?). I spent about 10 minutes just trying to (unsuccessfully) import to iMovie, so that aint working either. Quicktime maybe? Thx for reading

Hey jabXhook,
Thanks for the question. You may have already received your answer from the Apple Store yesterday, but iMovie is definitely the way to go if you want to trim or split clips. Check out the following resource:
Trim, split, and move clips - iMovie Help
http://help.apple.com/imovie/mac/10.0.6/#/movf8b8fc9b2
Trim unwanted frames from a clip
1. In the timeline, select the range of frames you want to keep in the clip.
2. Control-click the clip, and choose Trim Selection from the shortcut menu.
The clip is trimmed to the boundaries of the selection.
Thanks,
Matt M.

What is the easiest way to download a document from SAP DMS with C#?

Hi,
I've been sifting through this forum and looked at various posts and sample code, but so far my quest hasn't been fruitful.
What is the easiest way to download a physical document file from SAP DMS using C#? I'm using the NCo 3 (SAP .NET
Connector 3).
Requirements
- As few dependencies as possible (not adding or changing functionality in SAP)
- C# code (MS Visual Studio 2012)
- SAP Environment: NetWeaver 7.4.0
Thanks for all help.
Regards,
Frank

We've been using BAPI_DOCUMENT_CHECKOUT2, but there seems to be a limitation. From what I've found on Google, you must enable the use of the SAPGUI through the flag UseSAPGUI when connecting to SAP. It works, but my issue is that when I use it on a web server, I end up with some error when trying to start the GUI. There is very little recent information for this out there right now.

What is the easiest way to add a slide show to a dream weaver page?

What is the easiest way to add a slide show to a dream weaver page?

Copy & paste the following code into a new, blank document. Change images to your own. SaveAs test.html and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Cycle2</title>



<script src="http://code.jquery.com/jquery-latest.min.js">
</script>

<script src="http://cdnjs.cloudflare.com/ajax/libs/jquery.cycle2/20130409/jquery.cycle2.min.js"></script>
<style>
/**Slideshow**/
.cycle-slideshow {
    position: relative;
    z-index: 1;
    width: 400px; /**adjust width as required**/
    margin:75px auto;
    text-align: center;
.cycle-slideshow img { max-width: 100% }
/* prev / next links */
.cycle-prev, .cycle-next {
    position: absolute;
    top: 0;
    width: 20%;
    opacity: 0;
    filter: alpha(opacity=0);
    z-index: 800;
    height: 100%;
    cursor: pointer;
.cycle-prev {
    left: 0;
    background: url(http://malsup.github.com/images/left.png) 50% 50% no-repeat;
.cycle-next {
    right: 0;
    background: url(http://malsup.github.com/images/right.png) 50% 50% no-repeat;
.cycle-prev:hover, .cycle-next:hover {
    opacity: .7;
    filter: alpha(opacity=70)
/**END SLIDESHOW STYLES**/
</style>
</head>
<body>
<h1><a href="http://jquery.malsup.com/cycle2/">JQuery Cycle2</a></h1>

<div class="cycle-slideshow"
    data-cycle-fx="fade"
    data-cycle-timeOut="2000"
    >

<div class="cycle-prev"></div>
<div class="cycle-next"></div>

<img src="http://jquery.malsup.com/cycle2/images/p1.jpg" alt="description">
<img src="http://jquery.malsup.com/cycle2/images/p2.jpg" alt="description">
<img src="http://jquery.malsup.com/cycle2/images/p3.jpg" alt="description">
<img src="http://jquery.malsup.com/cycle2/images/p4.jpg" alt="description">
<p>Mouse over image for previous / next links</p>
</div>

</body>
</html>
Nancy O.

What is the easiest way to assemble forms in Swing ?

Dear friends,
I�m doing a nice job with GridBagLayout, and my forms are well designed as well.....
but now I have to share my tasks with some other guys without swing experience... and I�m afraid to teach GridBagLayout will cause more problems than productivity....
I have decided to use some framework or another layout manager,....
can you tell me what is the easiest way to construct forms in Swing ??
best regards,
Felipe Ga�cho

First off, make them learn GridBagLayout as well as the other layout managers (like BorderLayout). Have them play around with JBuilder's visual editor, making note of what changes visually do to the underlying code, etc. It will serve them well.
I have yet to find an "easier" layout manager that doesn't at some point tie your hands and end up making life more difficult. With GridBagLayout, BorderLayout and use of subcontainers, you can do anything you might need. :-)
I wouldn't say absolute positioning is anti-Java.
It's certainly more work to deal with in most cases.
. You can always get the screen resolution and
adjust your sizes accordingly. It's still 100% pure
Java code. It is anti in that it doesn't follow the general spirit of Java. Yes it will be 100% Java code, but it will be at least 90% crap as well. :-) You then can't easily do localization, changes in the look & feel mess up your app, your components won't resize properly, any change to a label's text causes you to have to tweak everything, etc. Ghastly stuff. It is the lazy way to get the GUI to look like someones mock up, but that is all it's good for.
If you run across a GUI done with absolute positioning, you have my permission to give the responsible developer an atomic wedgie.

What's the easiest way to transfer data from an old external disk to a new one?

Hello!
My external hard drive (SimpleTech 250GB) is almost full so I bought a LaCie P'9230 3TB hard drive to take the place of the old one. What is the easiest way to transfer the data from the old one to the new one? Also, any tips on how to format the new drive will be appreciated since I haven't done this in a while.
Thank VERY much!!!
tenntooter

Hello rkaufmann87 and Linc,
Thank you both for your responses. It ended up that it was REALLY easy to set up and use the LaCie drive. The drive came with very simple instructions and a very easy to use setup assistant. Setup took about 2 minutes without ever leaving the assistant to get into Disk Utility, etc. Once the drive was setup I simply dragged the older external drive on top of the LaCie drive and the LaCie copied the data in about a minute.
After backing up the old drive I set Time Machine to use the new LaCie drive and selected the encryption option. It took the LaCie drive about an hour to totally back up my iMac's hard drive and to encrypt it as well.
VERY IMPRESSED with LaCie for sure!!! (As well as continuing to be VERY IMPRESSED with my MAC!!!)
Thanks again!
tenntooter

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

What is the easiest way to create and manage very big forms?

I need to create a form that will contain few hundred questions. Could you please give me some advise on what is the easiest way to do that? I mean for example is it easier to create everything in Word (since it is easier to manage) and than create a form based on that?
My concern is that when I will have a very big form, containing different kinds of questions and with many scripts, managing it during work will be slow and difficult, for example adding a question in the middle of the form which would require moving half of the questions down which could smash the layout etc.
What is the best practise for that?
Thanks in advance

Try using Table and Rows for this kind of forms. These forms will have the same look throught with a question and and answer section..
In the future if you want to add a new section, you can simply add rows in between..
Thanks
Srini

I want to use 1 itunes account but with 3 different iphones 2 for the kids and one for me, what is the easiest way to do that?

I want to use 1 itunes account but sync 3 different iphones, 2 for the kids and 1 for me. So I would like to have different programs, songs, apps etc for each phone. What is the easiest way to do that

Agreed heather. Also, if you have three users on the same account how do you keep phone calls and messages from going to all three phones?

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

Following up on this thread,
I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
Question:
Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

What is the easiest way to burn imovies onto DVD's. I want to burn more than one movie onto DVD as I create. Can I continue to burn onto the same DVD as the movies are created?

What is the easiest way to burn my imovies onto DVD's? I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full! Is this possible?

You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie

What is the easiest way to create alias email addresses in exchange 2013?

For example my official domain is [email protected]
Within my company i want to make it look like certain departments are sending from bicycles.com skateboards.com
and skooters.com and receive to those addresses even though the emails are really going through the
[email protected] domain. but it appears to be coming from three other domains.
appearance is everything. What is the easiest way to accomplish this.
Step by step with examples if possible. I am not well versed in exchange server 2013 yet.
Droid Hacker

In Exchange 2013 you can use the ECP to add additional email addresses to mailboxes. In order for a mailbox to send using an address, that address needs to be set as the reply address. One mailbox cannot send as multiple addresses. Doing that would require
a mailbox for each address. To set a new primary address on a mailbox log into the ECP and choose mailboxes under the recipients option on the left. Then search for the mailbox you want to add the address to and click the edit symbol. Navigate to the
Email Address tab on the left. To set a new primary address you will likely need uncheck the box for "Automatically update email addresses based on the email address policy applied to this recipient". Then click the plus button, enter the new address,
and check the box for "Make this the reply address"
Before you do this you should ensure that the proper MS records exist for these other domains, and that they are properly configured for mail flow. Once you set this as the reply address for a mailbox, that is the address external users will use for replies.

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

Its worth confirming what free space you have on your drive:
go to: Apple Menu > About this Mac > More Info > Storage
The bar chart shows how much free space there is on the drive:
Please realise that partitioning does not create extra space so this wont help you.
If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

What's the easiest way to move app data and data structures to a server?

Hi guys,
I've been developing my app locally with Apex 4.2 and Oracle 11g XE on Windows 7. It's getting close to the time to move the app to an Oracle Apex server. I imagine Export/Import is the way to move the app. But what about the app tables and data (those tables/data like "customer" and "account" created specifically for the app)? I've been using a data modeling tool, so I can run a DDL script to create the data structures on the server. What is the easiest way to move the app data to the server? Is there a way to move both structures and data in one process?
Thanks,
Kim

There's probably another way to get here, but, in SQL Developer, on the tree navigation, expand the objects down to your table, right click, then click EXPORT.. there you will see all the options. This is a tedious process and it sucks IMO, but yeah, it works. It sucks mostly because 1) it's one table at a time, 2) if your data model is robust and has constraints, and sequences and triggers, then you'll have to disable them all for the insert, and hope that you can re-enable constraints, etc without a glitch (good luck, unless you have only a handful of tables)
I prefer using the oracle command line EXP to export an entire schema, then on the target server I use IMP to import the schema. That way, it's near exact. This makes life messy if you develop more than one application in a single schema, and I've felt that pain -- however -- it's a whole lot easier to drop tables and other objects than it is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. just blow away what you don't want on the target after the fact..)
You could use oracle's datapump method too.
Alternatively, what can be done, IF you have access to both servers from your SQL developer instance (or if you can tnsping them both already from the command line, you can use SQL*PLUS), is run a script that will identify your apex apps' objects (usually by prefix to object names, like EBA_PROJ_%, etc) and do all the manual work for you. I've created a script that does exactly this so that I can move data from dev to prod servers over a dblink. It's tricky because of the order that must be executed to disable constraints and then re-enable them, and of course, trickier if you don't consistently prefix ALL of your "application objects"... (tables, views, triggers, sequences, functions, procs, indexes, etc)

What's the easiest way to end workout?

Similar Messages

Maybe you are looking for