What's the easiest way to strip out the css from a page?

recreate it with tables and uncheck the 'use css instead of
html tags' box in dw's preferences?
thanks.

Hey Joe,
Sadly, it's something you'll have to do by hand. The Tables
-> CSS conversion is pretty painless but I've never seen it work
the other way properly. You're best to just copy and paste the
content into tables.
It's too bad that your client needs it CSS free, tables are a
horrible way to deliver content but ... if the man signing the
check needs it done that way ... :(

Similar Messages

What's the easiest way to cut out about 20 seconds (in the middle) of a minute+ vid that i made on and downloaded from my iPhone 6

Hi - I'm a vid beginner, actually have a training session tomorrow at an App Store, but for now...what's the easiest way to cut out about 20 seconds (in the middle) of a minute plus vid that i made on and downloaded from my iPhone 6? I I'mported the clip to iPhoto on my new Macbook pro. The TRIM function in iPhoto seems only to want to let me cut from either end. I guess if I do cut out a section in the middle, maybe 'glueing' the sections back together is too much for iPhoto to handle (?). I spent about 10 minutes just trying to (unsuccessfully) import to iMovie, so that aint working either. Quicktime maybe? Thx for reading

Hey jabXhook,
Thanks for the question. You may have already received your answer from the Apple Store yesterday, but iMovie is definitely the way to go if you want to trim or split clips. Check out the following resource:
Trim, split, and move clips - iMovie Help
http://help.apple.com/imovie/mac/10.0.6/#/movf8b8fc9b2
Trim unwanted frames from a clip
1. In the timeline, select the range of frames you want to keep in the clip.
2. Control-click the clip, and choose Trim Selection from the shortcut menu.
The clip is trimmed to the boundaries of the selection.
Thanks,
Matt M.

What is the easiest way to take out white background in elements 12?

what is the easiest way to take out white background in elements 12?

Try this:
Open the program and go to Expert tab
Double click the background layer to convert it to a regular layer
Get the magic wand tool out of the toolbox. On the tool's option bar, check "contiguous" or leave it unchecked depending on the presentation of the white background. Start with tolerance setting 32; you may have to adjust it down - - depends on picture
Left click on a white area and hit delete on keyboard
Press CTRL+D to get rid of the marching ants
If you encounter a problem, post a representative picture here for targeted guidance. You can do that via the camera icon in the reply box, but not in an e-mail reply.

What is the easiest way to export all tables data from Oracle to MS SQL Server?

Hello MS,
I would like to export all tables from Oracle 11.2 to MS SQL Server 2012 R1.
Using the tool "Microsoft SQL Server Migration Assistant v6.0 for Oracle" did not work for me because there are too many warnings and errors regarding the schema creation (MS cannot know it because they are not the schema designer). My idea is
to leave/skip the schema creation to the application designer/supplier and instead concentrate on the Oracle data export and MS SQL data import.
What is the easiest way to export all tables data from Oracle to MS SQL Server quickly?
Is it:
- the „MS SQL Import and Export Data“ Tool
- the “MS SQL Integration Services” Tool
- not Oracle dump *.dmp format because it is a propritery binary format
- flat file *.csv (delimited format)
Thanks!

Hi lingodingo,
If you want to directly export all tables from Oracle database to SQL Server, I suggest you use SQL Server Import and Export Wizard. Because you just need to follow the wizard with GUI, this is the easiest way.
If you want to make some modification for the tables‘ data before loading to SQL Server, I suggest you use SQL Server Integration Services package. For more details, please refer to the following similar thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/38b2bed2-9d4e-48d4-a33f-1d9eed1c062d/flat-file-to-sql-server?forum=sqldatamining
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

What is the easiest way to move my iPhoto library from my macbook to my new mac pro?

What is the easiest way to move my iPhoto library from my macbook to my new mac pro?

Surprisingly easy! Go into the Finder, then into the Photos Library. In there, there will be a file called your iPhoto Library. It holds all your photos, essentially a special type of folder. Using an external hard drive transfer it to the same location on your new Mac. Now, when you boot iPhoto on the new Mac, it will recognise it and you'll see all your photos instantly!
There's a really good video on it here...
https://www.youtube.com/watch?v=J6N2K_gRKsQ

Hello everyone. As a new Mac user, I would really like to know the easiest way to move my music files from my old PC to my MacBook? Do I move only the files, the entire iTunes and how? I have a lot of music so it is not a solution with iPod/iPhone.

Hello everyone. As a new Mac user, I would really like to know the easiest way to move my music files from my old PC to my MacBook? Do I move only the files, the entire iTunes and how? I have a lot of music so it is not a solution with iPod/iPhone.

Your best option is to post this in the iTunes forum.
Ciao.

What's the easiest way to select all my files from all the folders on a hard drive and place into one folder?

Hi there,
I have about 30,000 images all in hundreds of folders. I'm wondering what the easiest way to get them all into one folder so I can select and convert them all from .psd, .tiff, etc all to jpg. The reason I'm doing this is because the folder structure is such a mess, that I'm just going to import them all into aperture to sort everything. But the .tiffs and .psds are 100 mb each so I want to scale them to jpgs that are only 4 or 5 mb before I even think about importing them into aperture.
I tried doing a search for "kind is image" and it shows them all but a ton of them are renamed the same thing so when I try to select all and move into one folder it tells me I can skip that one or stop copying.
Any thoughts or ideas on this?
Thanks,
Caleb

Hi russelldav,
one note on your data handling:
When each of the 50 participants send the same 60 "words" you don't need 3000 global variables to store them!
You can reorganize those data into a cluster for each participant, and using an array of cluster to keep all the data in one "block".
You can initialize this array at the start of the program for the max number of participants, no need to (dynamically) add or delete elements from this array...
Edited:
When all "words" have the same representation (I16 ?) you can make a 2D array instead of an array of cluster...
Message Edited by GerdW on 10-26-2007 03:51 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Whats the easiest way to migrate my itunes data from old failing PC to new PC so I can sync on new PC?

I have a failing PC that I sync my Ipad and Iphone to now. I have a new PC that I want to start using for this function. How do I migrate my Itunes Data Etc...so that I can sync on the new PC and not lose my apps, music, pics etc....There has to be a simple-stupid way of doing this. I have already downloaded Itunes on the new PC and just waiting for an answer to go forward.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

What's the easiest way to transfer 60GB of pics from old mac to new mac

I just got an awesome 24" iMac and want to permanently move 60GB of pics on my older MacBook Pro to my new iMac. I have iPhoto '08 on both computers. Do I just hook up the 2 computers via FireWire and import from within iPhoto on the new computer or is there something else I should do or look out for. Thanks

use the migration assistant, if it's a brand new mac, it will transfer everyting from your old mac to your new mac.
When I said everything, it's everything, your favorite in safari, your music, your email account, your internet connection setup and of course all your photo library.
Migration assistant is in Application - utilities then choose migration assistant. You need to plug both computer together via a firewire cable.
If you just want to tranfer the 60gb of photo you can just restart your old computer by pressing T and this will put your computer in target mode (you will see a big firewire logo moving on the screen. But make sure before you restart your computer and pressing the T, make sre both computer are plug together with a firewire cable.
Then, the hard drive of the old computer will mount on the desktop of the new mac and you can copy your file, like any external hard drive

Is System Restore the only way to sort out the 11.1.4 install problem?

After everything else, went for system restore to get 11.1.3 back. Apple owe me two hours of my life!

Thanks but unfortunately I don't have that option (I'm im Australia) so this will be day 8 that apple have my money without authorisation. The amount has now increased due to the transactions that were pending prior to me cancelling my credit card. The total is now over $300 including the overdrawn fee. It is beyond comprehension that a company the size of apple doesn't have a *real* customer service dept that handle these types of *real* problems immediately via phone contact but I guess that's the point isn't it? If we want to use the apps they provide thru their services and devices we have no choice but to put up with their primitive third world service. I sent them an email via the link you provided 4 days ago. There is no excuse for me to be STILL waiting for this problem to be resolved - none whatsoever, it is disgusting. Thanks for responding I had a feeling that was the only way to get this resolved, only it is so unbelievable I had to make sure.

What is the easiest way of listing all the ObjectSIDs in the FIM MA?

We have somewhere a duplicate objectSID.
A new AD account was created and has been imported into the MV... I have a MV entry with an objectSID from the Ad account.
When I try to export this MV entry to FIMMA it fails. The event viewer and request viewer indicate a constraint violation - duplicate objectSID.
What is the simplest method of identifying which FIM user has this objectSID?
When I can identify this rogue FIM user account I can fix it!

sorry.. just back from Holiday and brain not fully engaged.. of course searching the connector space does the trick.

What is the best way to find out the underlying platform within AIR?

I'd like to know whether Air is running on iOS, Windows, Android or Blackberry.

Here's our Utuls_System class. It's a work in progress, incomplete, and does other stuff as well, but take a look at init() and isIOS() etc...
package com.brightworks.util
    import com.langcollab.languagementor.constant.Constant_AppConfiguration;
    import flash.system.Capabilities;
    public class Utils_System
        public static const OS_CATEGORY__ANDROID:String = "osCategory_Android";
        public static const OS_CATEGORY__IOS:String = "osCategory_iOS";
        public static const OS_CATEGORY__MAC:String = "osCategory_Mac";
        public static const OS_CATEGORY__UNKNOWN:String = "osCategory_Unknown";
        public static const OS_CATEGORY__WINDOWS_DESKTOP:String = "osCategory_WindowsDesktop";
        public static const OS_CATEGORY__WINDOWS_MOBILE:String = "osCategory_WindowsMobile";
        private static var _isInitialized:Boolean;
        private static var _isMobileDevice:Boolean;
        //          Getters / Setters
        private static var _appHeight:int;
        public static function get appHeight():int
            init();
            return _appHeight;
        private static var _appWidth:int;
        public static function get appWidth():int
            init();
            return _appWidth;
        private static var _dpi:int;
        public static function get dpi():int
            init();
            return _dpi;
        private static var _osCategory:String;
        public static function get osCategory():String
            return _osCategory;
        //          Public Methods
        public static function getAppStoreName():String
            if (isIOS())
                return "Play Store";
            return "App Store";
        public static function isIOS():Boolean
            return (osCategory == OS_CATEGORY__IOS);
        public static function isScreenResolutionHighEnough(requiredX:uint, requiredY:uint, isMobile:Boolean):Boolean
            init();
            if ((isMobile) && (!Utils_System._isMobileDevice))
                // We're testing on the desktop, and can't check screen size
                return true;
            if (Capabilities.screenResolutionX < requiredX)
                return false;
            if (Capabilities.screenResolutionY < requiredY)
                return false;
            return true;
        public static function isRunningOnDesktop():Boolean
            init();
            return !_isMobileDevice;
        //          Private Methods
        private static function init():void
            if (_isInitialized)
                return;
            _isInitialized = true;
            _isMobileDevice = true;
            var operatingSystem:String = Capabilities.os;
            if (operatingSystem.indexOf("Windows") != -1)
                switch (operatingSystem)
                    case "Windows XP":
                    case "Windows 2000":
                    case "Windows NT":
                    case "Windows 7":
                        _isMobileDevice = false;
                        _osCategory = OS_CATEGORY__WINDOWS_DESKTOP;
                        break;
                    default:
                        _osCategory = OS_CATEGORY__UNKNOWN;
                        Log.fatal(Constant_AppConfiguration.APP_NAME + " does not currently support this operating system. (" + operatingSystem + ")");
            else if (operatingSystem.indexOf("iPhone") != -1)
                _isMobileDevice = true;
                _osCategory = OS_CATEGORY__IOS;
            else if (operatingSystem.indexOf("MacOS") != -1)
                _isMobileDevice = false;
                _osCategory = OS_CATEGORY__MAC;
            else if (operatingSystem.indexOf("Linux") != -1)
                // This won't work properly if developing on Linux, but I've spent multiple minutes
                // trying to find out how to differentiate Android from other Linux versions, and
                // haven't found anything that I'm confident will work for future versions of Android.
                // Currently I get "Linux 2.6.32.9-g34b306d". I suspect that the "g" indicates "Google"
                // but have found nothing to support this idea.
                _isMobileDevice = true;
                _osCategory = OS_CATEGORY__ANDROID;
            if (_isMobileDevice)
                _appHeight = Capabilities.screenResolutionY;
                _appWidth = Capabilities.screenResolutionX;
            else
                _appHeight = 220;
                _appWidth = 360;
            _dpi = Capabilities.screenDPI;

What is the easiest way to restore to a previous backup of Time Machine?

I was adding some simple album cover artwork to my iTunes collection when the computer locked up. I got the spinning beach ball and was unable to "force quit." So, I did a re-boot using the power key. I then launched iTunes and it opened properly with all the new Album Artwork. The files were not large in size and the "Album Artwork" folder is only 99.8MB.
I did a Time Machine backup yesterday and the only thing changed on the computer was the artwork. However, when Time Machine launched to do a backup it said there was 30GB(!!!) to back up?!?!?
I am assuming something got corrupted in the iTunes library file during the crash and now it thinks it has to back up part of the music.
So, that is what caused the problem. My question is, what is the easiest way to simply restore the backup the Time Machine had completed yesterday before all this happened?? It doesn't seem like there is a simple way to accomplish this. It looks like TM is used to back up specific files or folders and not to restore the computer to a previous state.
Any help is much appreciated.
Thanks in advance!!

Time Machine backs up all files except those you exclude in TM prefs. It doesn't "know" what kind a file is; it just compares info about a file on the source drive to see if it has already been backed up, or if it is new or has changed and needs to be backed up again. For unchanged files or folders, TM simply creates another hard link on the backup drive.
iTunes artwork files are separate files. The assignments of artwork to particular music files are saved in another file within the iTunes application (which is actually a package, a folder containing other files). So if all you did was add album artwork, TM would back up each new artwork file, and a new copy of the hidden file within the iTunes application containing the artwork-music links.
The following is speculation on my part, but it seems logical:
TM uses records in the hidden File System Events log to identify any new or modified files. However, it is possible to have an FSE entry as to a particular file without modifying the file (e.g. open, then close). So TM doesn't "know" until it actually compares the source file with the backup file (if one exists) whether a file is new or has been modified.
Hope this helps.

What's the easiest way to validate the 2nd date is after the 1st date?

Hi,
I have 2 items, say, date1 and date2.
What is the easiest way to validate that the date2 is after date1? For example, date1 is "07/31/2009", thus date2 must be after "07/31/2009".
Thanks much :)
Helen

Helen:
For the example provided you can create a validation of type 'PL/SQL->pl/sql expression' and provide the expression below
to_date(:p_date2,'mm/dd/yyyy') > to_date(:p_date1,'mm/dd/yyyy');
Varad

HT3529 easiest way to print out my text messages from one person

I would love to know the easiest way to print out my text messages from one person, how can I do that?
I just did the last IOS updated, I'm not sure the number after it

Printing from the iPhone either requires an AirPrint compatible printer, or an app from the App Store. You would have to search to see if they are free or cost. Also, the printing of text messages would either require you to make a screen shot of the message and to print that as a photo, or you would need a 3rd party software on the computer to copy the entire message to the computer and print from there. There is no native print capability for entire message threads.

What's the easiest way to strip out the css from a page?

Similar Messages

Maybe you are looking for