What's the fastest way to change IP addresses in a Project?

Hi folks,
I'm using a cFP2100 controller with LabVIEW 8.2.1. I made a project using a configuration I created in MAX. Now I've moved the whole bank of modules to a new location, and the controller now has a new IP address via DHCP. My question is, what's the fastest way to update the IP address for my project? Do I have to make a brand new project with a new .iak file that has the new IP address? I'm thinking there's got to be an easier way.
Thanks!
Eric

Hi Eric,
Since you are getting your IP address from a DHCP server, the IP address of your Fieldpoint device is ultimately dependant on the server. If your IP address changes, you have two choices. You can right click your target and go to properties. In the properties under the general category, you can change the IP address of the target. The second option is to import a new IAK file into your project by right clicking the Project Name and going to import>>iak file.
I hope this helps,
Regards,
Nadim
Applications Engineering
National Instruments

Similar Messages

What's the fastest way to change the acquisition ROI in IMAQdx

I'm trying to change the Offsets and the image width and height from LabVIEW as fast as possible. With the code shown it takes about 200ms. Is there a faster way?
Without the unconfigure and configure I get error -1074360304 0xBFF69010
I'm running RT 8.6
Message Edited by InfiniteNothing on 03-04-2010 12:08 PM
CLD (2014)
Attachments:
change aquisition.PNG ‏6 KB

It's a pity because unconfiguring the camera and closing a camera session and takes a short, but not insignificant, amount of time. What I was trying to do was use a small number of lines (~100) in a loop to detect some movement in the object before capturing a much larger image (~8000 lines). But the time needed to reconfigure the camera was such that most of the sample had travelled past the camera before I could start capturing again. In essence I was trying to use the camera to trigger itself, given that the leading edge of my object could be ignored. Might there be another way around this?
Simon

Sq01 what is the fastest way,

hi all,
what is the fastest way to detect coding that update to eban from sq01?
as i am facing problem with more than 100,000 PRs updated mysteriously (customer tab data ) without any history changes .
i suspected it might be from query and i need to find the root cause of problem immediately
pls advice

Hi Ester,
Haven't got clearly what you written.
You mean to say, there is modifications done to query for updation?
if it is a standard code then I don't think it is used for modification.
Regards,
Atish

What is the fastest way of getting data?

With a scanning electron microscope, I need to scan a 512*512 pixel area with a pixel repetition of 15000 (two channels), meaning averaging over 15000 measurements. Simultaneously I have to adjust the voltage output for every pixel.
I am using a 6111E Multifunction I/O board in a 800MHz P3. The whole task has do be done as fast as possible (not more than 20 minutes altogether).
What is the fastest way to get this huge amount of data with averaging and output in between? (E.g. do I use buffered read with hardware triggering or is there a faster way?)

Using the NI-DAQ API (not LabView) will give you a significant amount of more control over what happens and when to the data stream; which translates to a more efficient program. But you need to program in C/C++ or Delphi then. The Measurement Studio provides ActiveX controls that are like the LabView ones for C&C++ (they�re slow like the LabView ones though � not a lot you can do about the Windows GDI).
What are you trying to sample 15000 times? The 512*512 pixel field?
That�s almost 15Gigs of data! And it means you need to process data at 12.8MB/s to finish it in 20 minutes. I hope you know C, x86 assembly and MMX.
I would setup a huge circular buffer (NI-DAQ calls them �double buffers�), about 30 seconds worth or so, to use with SCAN_Start. Then I would proces
s the actual buffer the card is DMA�ing the data into with a high priority thread. Progressively sum the scan values from the 16bit buffer (the samples are only 12 bit, but the buffer should still be 16bits wide) into a secondary buffer of DWORDs the size of the screen (512*512), and you�ll need two of those, one for each channel. Once the 15000 scans are complete, convert each entry into a float divide by 15000.0f, and store it in a third buffer of floats.
If you wish to contract this out, send me an email at [email protected]

There are over 4000 duplicates in my iTunes. What is the fastest way to delete them?

There are over 4000 duplicates in my iTunes. What is the fastest way to delete them?

Hello there, yandere69keita.
The following Knowledge Base clarifies your concern about your My Photo Stream counting towards your iCloud storage:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
Does My Photo Stream use my iCloud storage?
No. Photos uploaded to My Photo Stream do not count against your iCloud storage.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

What's the fastest way to share files live between 2 Macs in the same room?

Please can I have some advice on this scenario?
I'll need to share HD video footage between 2 new Mac Pros in the same room. 1 Mac will be used to upload the footage and the other to edit it using FCP. The footage can be stored either on hard drives in the edit machine or on desktop hard drives connected to the edit machine (or if there is a better option I'm open to advice).
What is the fastest way of sharing the files and what is the simplest way?
Any suggestions would be greatly appreciated.
Thanks in advance

What is the fastest way of sharing the files and what is the simplest way?
Fastest way? a fiber channel SAN connecting the two machines to a common fiber-channel based storage array. Can't beat it for performance, but it comes at a cost (think $20K as a starting point, depending on the amount of storage you need).
Simplest way? Some external media (thumb drive, external hard drive, etc.) that you shuffle between the two machines
Intermediate: a NAS-based storage box on your network, although be aware that real-time editing of HD video can overwhelm many low-end NAS boxes.

What is the proper way to change rowHeight? (possibly animate?)

What is the proper way to change rowHeight for UITableView? I set tableView.rowHeight and do a [tableView reloadData]. Is this necessary? Also, is it possible to animate the height change? It is not a standard transition.

Not a perfect solution for your animation question - but....
in the function where you want to change the height
WARNING PSUDO CODE
//indexPath is the path for theCell you want to edit
thePlaceThatYouStoreYourHeights[x] = aNewHeight;
[tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade];
[tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationTop];
and inside of - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath (NSIndexPath *)indexPath
return thePlaceThatYouStoreYourHeights[indexPath.row];
Basic flow
1. Store new desired height somewhere
2. Remove the cell deleteRowsAtIndexPaths
3. UITableView paints the animation for the "remove" transition **see note
4. Re-add the cell insertRowsAtIndexPaths (which subsequently kicks of a call to heightForRowAtIndexPath before animating)
5. UITableView paints the animation for the "add" transition
You do NOT need to call reloadData to get this to work.
**note: an enum such as UITableViewRowAnimationNone does not exist (it should but it doesnt seem to). the docs for InsertRowsAtIndexPaths say "A constant that either specifies the kind of animation to perform when inserting the cell or requests no animation." however there are only 5 items in the UITableViewRowAnimation enum and UITableViewRowAnimationFade resolves to 0 - so passing NO will actually get you fade. Nor will it take nil.
Hope this helps shed some light.

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?
I have a Firewire cable and Thunderbolt adapter, but no icons showing either Mac appear on either desktop.

The fastest way is to use Carbon Copy Cloner and a external drive formatted GUID OS X Ext. J in Disk Utlilty, then connecting to the new Mac and using Migration Assistant in the Utilites folder.
Even faster, if you can determine your going to replace all the apps from fresh sources anyway (like if the older Mac's OS X verison is old thus the apps) then just use a external drive and copy just your files to it, then connect to the new Mac and transfer over.
Some apps you can just grab the registration code and install it fresh on the new machine with the old code, talk to the developer about transfering the program, as long as it's deleted on the older Mac in the process.
It used to be Firewire Target disk mode was fastest, but since Thunderbolt came out...
Notice this support doc hasn't been updated since june 2012, no Thunderbolt info
https://support.apple.com/kb/HT1661

What's the fastest way to kill the battery...

hello friends. i was wondering what's the fastest way to drain my macbook pro battery so i can calibrate it? i want to kill the battery not the laptop if you know what i mean. thanks.

Turn on wifi + bluetooth and turn the brightness all the way up, and if its a new mbp, turn off the automatic video card switching in energy saver. Then just play youtube videos / movies / games (anything that uses the vid card as much as possible helps) till it goes flat.
Message was edited by: TiMatApple

What's the fastest way to upgrade from tiger

what's the fastest way to upgrade from tiger

Buy a DVD for the upgrade your Mac has the hardware to support.
Allan

What is the fastest way to detect on to off tag transitions and then read 500 analog tags?

what would be the fastest way to read 500 analog tags from the tag engine when a boolean tag transitions from on to off?? Right now I have a boolean indicator setup with the HMI wizard in a while loop with 20ms timer. The indicator feeds the boolean crossing ptbypt vi. When the output is true, I use one read multiple tags vi to get all 500 at once. I am reading data into the tag engine through an opc server and have around 2500+ tags. I need to read all of the data in less than 100ms. My plc logic is setup to zero out all of the 500 analog tags when the boolean indicator turns on again. Would I be better off using the trend tags vi to monitor the boolean indicator??

Unclebump,
You might try using read tag.vi

What is the proper way to change a url link?

I need to tell DW to change all url links (on all pages) going to an old url to a new url. What is the proper way to do this? thanks.

Did you even read my reply properly?
'Defining a site' in DW has everything to do leveraging most functionality with FUNDAMENTALS of DW usage.
'Change links sitewide' is an option within DW that will change links across sites by replacing an old link with a new - for DW to do this for more than just ONE FILE in your site, DW has to know what other files make up your site. This is why 'Defining a site' is critical.
If you do feel otherwise, please go ahead and wait for somebody else (an expert) to post his views on this. Let's see what they have to say.
Either which way, I really think you should change your attitude while posting on this forum. That will not only help you, but all of us here.
Good luck.

What is the fastest way to pass data between parallel threads?

I have a top level vi running with 6 parallel threads. I need to pass some data from digital I/O to several of the threads. What is the fastest responding way to do this. I am controlling a machine that has quite a few sensed events happening at very close intervals, some as close together as 1 to 2 milliseconds, and I seem to be randomly missing the signal from these sensors. How can I distribute the I/O to the different threads and not miss any inputs?

I usually use a Queue to pass data from one loop to another. Other
choices are Functional Globals or Notifiers. It kind of depends on what
you need to do as to which one is best, so it's a bit hard to recommend
one over the others without knowing more about your application.
Both Queues and the Functional Globals (if written correctly) can
buffer data so you're less likely to lose data if one loop gets behind
the others.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

What's the fastest way to put items of a list in a map?

say i have a list of items and i would like to put them in a map.
what's the shortest way to do that?
or i should just iterate the list and put every item in a map? is there a command such sa
list.toMap ???
thanks

say i have a list of items and i would like to put
them in a map.
what's the shortest way to do that?
or i should just iterate the list and put every item
in a map? is there a command such sa
list.toMap ???
And what do you think such a method would do, other than iterating over the list?

What's the fastest way to look up a User's Work Items?

Hi, my SCSM environment has a few different service desks and plenty of customer drive-by's. Sometimes when a customer comes up and asks for a status, the SD personnel can't find their ticket quickly. The fastest way right now is to 1.) click on CONFIGUATION
ITEMS; 2.) Search for the Affected User; 3.) Click on the Affected User; 4.) Click on the Affected User's Related Items; 5.) Search the related items for the proper Work Item; 6.) Load the Work Item.
It's not bad, but it's a lot of steps and I'm wondering if anybody has a faster method in place.

Just to poke holes in the salesmanship, Consider that you might have an easier time in doing any of the following:
Create a view that lists all open incidents, and make the first column Affected User. Analysts can filter or sort by this column to get quick info
The search box in the top right corner can be set to users, right click the down arrow to see all options.
the search box in the top right can be used to search work item IDs or titles.

What's the fastest way to change IP addresses in a Project?

Similar Messages

Maybe you are looking for