What's the fastest way to create a clipping path?

In CS3 & 4 I've created a bazillion clipping paths via pen tool and mouse. I've also tried using the various selection tools to create selections, then turning those selections into paths and modifying the path. I've roughed in paths then zoomed way up to fine tune them.
Is there any plug-in or other slick method to create clipping paths real quickly? Maybe a Wacom pen would work quicker than a mouse? I haven't tried that. I've tried everything else I can think of.
I happened to notice there are online services that charge like $2.00 to create a clipping path for you. So that either has to be from slave labor or someone has figured out a real fast way to do it.
I'm sorry to repeat a question if it's been answered before.  I searched for clipping paths in the Photoshop forum and Adobe returned 0 results.

A Wacom tablet is a must. If you are doing lots of clipping paths, avoid carpel-tunnel, and get the work done easier and faster using the Wacom. I've tried all the sizes and I use a 4x5 because it's all the real estate you need, even on 30" monitors. Other than that, there is no software that thinks like a human can in making discretionary choices. Just get the Wacom and roll. You'll have that pen tool motating at full throttle and even make the labor enjoyable.
Be sure to take your customary 20 minute ergonomic breaks to let your eyes focus and +20 feet away.
Best,
Ken

Similar Messages

  • In multitrack view, What's the fastest way of moving a clip back by an exact number of milliseconds?

    I want to move a clip back in time by an exact number of milliseconds (Say 30 ms), to the nearest sample.
    Moving back by a known number of samples would be fine too.
    What I'd like to do would be just click on the Clip Start Time (as you can the Clip Gain) and change it.... but this doesn't seem to be possible.
    What's the next best thing?
    I've considered putting a negative delay on the track, but that's a pain....
    Thanks!

    Provided you are zoomed in enough position the cursor at the spot where you want the clip to start (adda marker if you wish) and left click on the clip and slide to the cursor/marker. Provided Snap to Markers is activated it should end up exactly where you want.
    Or you can Nudge the clip left and right by using Alt +, or Alt +. keyboard shortcuts.
    Or you can Ripple Delete/Time in Selected Track from the edit menu after selecting the appropriate number of milliseconds using the Time Selection Tool on the track before the clip starts.
    Message was edited by: ryclark

  • What is the fastest way to create thumbnails in CS6?

    Hi All...
    I wanted to know if there is a certain way you can take larger images and have them shrink down to a thumbnail size in an automated fashion?  Instead of having to load each image and change the dimensions and export the image as a thumbnail?  I'm using Web Premium CS6 and also have Lightroom 4.  There must be a less tedious method to create a small size and a large size image...
    Any thoughts?

    You can do this easily using Actions and Batching in Photoshop CS6.
    Here are two video tutorials on how to do this in CS6, specifically for creating thumbnails; using actions and batching actions. The guys is a little long-winded but is very comprehensive.
    And here's an article on how to do the same thing. It's from 2007 but explains the process nicely.

  • What's the fastest way to create simple report for the web?

    I have Developer 6i and Oracle 9I installed.
    If i have a report already done, how can I make it available to users, so they can access them thru an IP or a host?
    can I achieve that just with my developer 6i (report builder) and my database (oracle 9i)???
    If so, how?

    1) pls see
    [     Publishing reports to web  - 10G  ]
    see
    [    All Docs for all versions    ]
    for 9i version of same document
    2) Better to have 9i builder - 9i ias combinations
    (not sure whether other combination is supported or not. but understandably it is best to have same combination]
    [    All Docs for all versions    ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    ---------------------------------------------------------------------------------

  • What's the fastest way to change IP addresses in a Project?

    Hi folks,
    I'm using a cFP2100 controller with LabVIEW 8.2.1.  I made a project using a configuration I created in MAX.  Now I've moved the whole bank of modules to a new location, and the controller now has a new IP address via DHCP.  My question is, what's the fastest way to update the IP address for my project?  Do I have to make a brand new project with a new .iak file that has the new IP address?  I'm thinking there's got to be an easier way.
    Thanks!
    Eric

    Hi Eric,
    Since you are getting your IP address from a DHCP server, the IP address of your Fieldpoint device is ultimately dependant on the server.  If your IP address changes, you have two choices.   You can right click your target and go to properties.  In the properties under the general category, you can change the IP address of the target.  The second option is to import a new IAK file into your project by right clicking the Project Name and going to import>>iak file. 
    I hope this helps,
    Regards,
    Nadim
    Applications Engineering
    National Instruments

  • What is the best way to create business documents in CRM

    Hi All,
    What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
    Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
    Please help.

    Ashim,
    Try looking at the program:
    CRM_TEST_ORDER_MAINTAIN
    I think that should help you figure out the parameters.
    Good luck,
    Stephen

  • What is the fastest way of getting data?

    With a scanning electron microscope, I need to scan a 512*512 pixel area with a pixel repetition of 15000 (two channels), meaning averaging over 15000 measurements. Simultaneously I have to adjust the voltage output for every pixel.
    I am using a 6111E Multifunction I/O board in a 800MHz P3. The whole task has do be done as fast as possible (not more than 20 minutes altogether).
    What is the fastest way to get this huge amount of data with averaging and output in between? (E.g. do I use buffered read with hardware triggering or is there a faster way?)

    Using the NI-DAQ API (not LabView) will give you a significant amount of more control over what happens and when to the data stream; which translates to a more efficient program. But you need to program in C/C++ or Delphi then. The Measurement Studio provides ActiveX controls that are like the LabView ones for C&C++ (they�re slow like the LabView ones though � not a lot you can do about the Windows GDI).
    What are you trying to sample 15000 times? The 512*512 pixel field?
    That�s almost 15Gigs of data! And it means you need to process data at 12.8MB/s to finish it in 20 minutes. I hope you know C, x86 assembly and MMX.
    I would setup a huge circular buffer (NI-DAQ calls them �double buffers�), about 30 seconds worth or so, to use with SCAN_Start. Then I would proces
    s the actual buffer the card is DMA�ing the data into with a high priority thread. Progressively sum the scan values from the 16bit buffer (the samples are only 12 bit, but the buffer should still be 16bits wide) into a secondary buffer of DWORDs the size of the screen (512*512), and you�ll need two of those, one for each channel. Once the 15000 scans are complete, convert each entry into a float divide by 15000.0f, and store it in a third buffer of floats.
    If you wish to contract this out, send me an email at [email protected]

  • What is the best way to create a database schema from XML

    What is the best way to create a database schema from XML?
    i have  a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
    There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
    Taking my C# further

    Hi Saythj,
    When mentioning "a database schema from XML", do you mean the
    XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
    Create an XML Schema Collection basing on your complex XML, you can find
    many generating tools online to do that.
    Create a Table with the above created schema typed XML column as below.
    CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
    Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • What is the best way to create CRUD datagrids

    What is the best way to create CRUD datagrids that tell CF
    components to update sql tables. I find that I'm having to vreate
    all these columns with custom properites and its a bit of a chore:
    <mx:DataGridColumn id = "NatWest" dataField="NatWest"
    headerText="NatWest" editable="false"
    wordWrap="true"
    textAlign="right"
    headerStyleName="centered"
    labelFunction="price_labelFuncNatWest"
    sortCompareFunction="price_sortCompareFunc">
    I don't really want to use any wizards as I want control over
    my code.

    Hi Saythj,
    When mentioning "a database schema from XML", do you mean the
    XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
    Create an XML Schema Collection basing on your complex XML, you can find
    many generating tools online to do that.
    Create a Table with the above created schema typed XML column as below.
    CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
    Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • What is the best way to create a read more/collapse text box on the homepage of a site?

    What is the best way to create a read more/collapse text box on the homepage of a site?

    I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"

  • What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

    What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at  individual PXI system).

    Dear Ravens,
    I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.

  • What is the best way to create E-Flyers and insert to Microsoft Outlook??

    What is the best way to create E-Flyers and insert to Microsoft Outlook??

    http://kb.mailchimp.com/article/how-to-code-html-emails
    Once created, the HTML document cab be placed in the Stationery folder.
    On a PC it's here.
    "C:\Program Files\Common Files\Microsoft Shared\Stationery"

  • What is the best way to create Aperture book from Pages '09 document?

    What is the best way to create Aperture book from Pages '09 document?

    There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
    The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and  create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
    But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

  • What is the best way to create the layout for a single page website in Adobe Muse?

    I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

    I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
    Demo Website

  • What is the best way to create space for a Yosemite download?

    What are the best ways to create space for the download of Yosemite.  I can't install it as I don't have enough space.

    Did you empty Trash?  Very important!
    How much space do you have available?  Click in the HDD icon on the desktop, COMMAND+I.
    Also try a Safe Boot:
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    That will temporarily create some additional space.
    Ciao.

Maybe you are looking for