What's the FPGA step size and how to calculate it?

Hi there,
I inherited an vi with problem in it. It's basically reading the binary file then display it. So the vi reads the binary file by using Read From Binary File, the output data from this function then sends to FPGA after multiply a number (32767/10). But unfortunately I got a wrong output. The final output value for some reasons looks got attenuated. People told me maybe it's related to the FPGA step size, so I want to know what is the FPGA step size and how to calculate it. Can someone answer my questions here?
Thanks in advanced!!!

Hi Weny,
It sounds like you are trying to find out the output resolution of your FPGA module.  It would be helpful if you provided what FPGA module you are using in your tests so we know what information to provide.  For instance, the R Series Manual provides information on how to calculate the required DAC output code to generate the desired output voltage.  You should also try to keep the accuracy of your device in mind.  The analog output signal you are generating will be subject to gain, offset, and noise errors.  You can use the specifications sheet (such as the R Series Specifications) of your device to determine what accuracy your board will have.  The specs also provide information on the resolution of the board.  You can search ni.com for the manual and specifications for your particular device if you are not using R Series. 
Regards,
Browning G
FlexRIO R&D

Similar Messages

  • What is the package mzm.stuhjljp and how can I re download it ?

    What is the package mzm.stuhjljp and how can I re download it ?
    I opened it and a Lion icon went to apps folder, then I deleted the
    package folder and package,because I did not recognize what it
    was and after I found out I need the whole package stored
    someplace else beside my download folder.

    Hi,
    Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
    OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
    1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
    2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
        REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
        Again, this subset (of LDAPs realizing the maximum flag) is not empty.
    3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
    Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
    Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
    Or do they mean "the first in the list on the WLS Console"?
    Best regards,
    Ludovic

  • What's the Commitment item? And how to use it?

    When I create a G/L account by FS00 I need to input a Commitment item.
    But I don't know how to use it.
    Can you tell me what's the Commitment item? And how to use it?
    Thank you very much.
    Moderator: Try pressing F1 or going to help.sap.com

    >>In SAP XI / PI, WS adapter is not thier frm standard SAP.
    Are you sure about this?
    WS is a standard adapter shipped along with PI 7.1 installation.
    Quote from help.sap.com
    Using the WS adapter you can configure the communication of systems, which communicate with each other using the Web service runtime either directly (point-to-point) or using the Integration Server
    Refer:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
    http://help.sap.com/saphelp_nwpi71/helpdata/en/45/37d73b80554c2ce10000000a1553f6/frameset.htm
    If you are not sure about what you are saying, it is better not to say it.

  • What is the best actual size and resolution to save photos to put on your iPhone?

    What is the best actual size and resolution to save photos to be easily viewed on IPhone?

    Sorry, this is my first use of this support site.  I didn't realize that it was only for technical questions.  I am not the one who loses his iPhone, but I just wanted to provide some help to our family member who does.  He is usually a very responsible person, but he has lost his phone more than once.

  • I am still running OS x 10.5.8 what is the next step up and the easiest way to get it. Does the Genius bar have the capability to get me to the most recent software if I take my Imac in

    I am still running OS x 10.5.8 what is the next step up and the easiest way to get it. Does the Genius bar have the capability to get me to the most recent software if I take my Imac in

    iMac G5 - you are at the end of the line, though you may be able to upgrade your RAM, or hard drive.
    iMac CoreSolo, CoreDuo - you can upgrade to 1 GB of RAM or 2 GB of RAM and get up to 10.6.8.
    iMac Core2Duo - you can upgrade to 2 GB of RAM or more and get up to 10.7.2.
    Go to Apple menu -> About This Mac to determine which Mac model you have.
    Here's what you have to watch out for on 10.6 to 10.6.8.
    Here's what you need to watch out for on 10.7 to 10.7.2.
    Some stores may not have 10.6 installer CD available, or may not have 10.7 Flash drive available.  For those you have to make the purchase from elsewhere,
    and bring it in to the store with you.  http://www.apple.com/retail has phone numbers for all their stores, and extension 5 often will get you a real person at the store, though if yuo don't get it, you might try a different extension.

  • What is the Weigh Bridge System and How to Implement

    Hi All,
    I have a requirement from a client to interface with Weigh Bridge systen and to generate the delivery order record.
    Could someone explain to me what is the Weigh Bridge system and how it is being implemented in SAP.
    Thank you!
    Regards,
    Yvonne

    Hi,
    this is to inform you that,
    this weigh bridge concept is very simple its an interface with other or software which the company which is implementing SAP.
    for EG:
    my company is cement company in production plant you will be getting raw materials in tons and out going finished products will also be in tons.
    in that plant there is weigh bridge where in flow of materials will be wieghed and if it matches to the paper which is getting along with then he ticks OK other wise NOT.
    the above case applies to out going of goods in tons also.
    regarsd,
    balaja

  • What is the default font size and font number used in OBIEE piechar Legend

    Hi Experts,
    What is the default font size and font number used in OBIEE pie-chart Legend
    Thanks
    V

    The default is font size 11, Tahoma.

  • What are the benefits of Yosemite, and how do I use them?

    I upgraded to Yosemite on my iMac.  I can see it looks different, but I don't know what the benefits are or how to access them.  I only upgraded because I have been told that I should use the newest version of software, as that is what is being maintained and improved.  Is there a site or a document somewhere that will describe the changes in Yosemite, and how to utilize them to the best advantage?

    The easiest graphical way I would recommend is to search for an example "whats new in yosemite" on youtube, I am sure you will find lots of videos on that.

  • What is the default identity store - and how can I set it?

    Hi,
    I'm running Webcenter on WLS, and using WLS and JPS for the authentication of users. On the WLS Console, if I go to Security Realms -> myrealm -> Providers, I have a list of four different providers.
    If I understand correctly, these four providers are my identity stores. How can I set one as the 'default' identity store? Or see which one is currently the default?
    The reason I'm asking is I have the following code in Webcenter to create a new user in the Active Directory:
          // Get the default identity store
          IdentityStore idStore = WCSecurityUtility.getDefaultIdentityStore();
          // Get the user manager object
          UserManager usermgr = idStore.getUserManager();
          usermgr.createUser(loginName, password.toCharArray(), propertySet);So I have a utility Java class which gives me the "default identity store". Now I want to change the WLS configuration so that the Active Directory in which I want to create new users is the "default" identity store.
    Thanks in advance for any help,
    Ludovic

    Hi,
    Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
    OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
    1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
    2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
        REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
        Again, this subset (of LDAPs realizing the maximum flag) is not empty.
    3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
    Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
    Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
    Or do they mean "the first in the list on the WLS Console"?
    Best regards,
    Ludovic

  • What are the prerequisites for GATP and how to check SO in APO

    Hi
    I've created a Sales order in R/3. for this the availability check is being done in APO(SCM). when I press enter it is going to APO(SCM).
    now i want to see this Sales order in APO(SCM), what is transaction for this? and do i need to maintain any CIF model to see the Sales order in APO.
    pls give me some note on this.
    thanx in advance
    Satya
    Edited by: Wilian Segatto on Jan 25, 2010 4:40 PM

    Hello,
    Please refer Building block of GATP, you will able to get systimatic way how to use GATP functionality in R/3 and APO as well as what are the settings require for it.
    http://help.sap.com/bp_scmv150/BBLibrary/documentation/ATP_BB_ConfigGuide_EN_DE.doc

  • What is the Other yellow stuff - and how do I get rid of it?

    I have .18 audio, .02 photos, .01 apps and .21 OTHER? I dont know what that is or how to get rid of it. I saw where some responses said to go to the back or restore factory settings. My question is on what and how? I am very computer illiterate and getting frustrated! Now it is not much, but I don't want it to cause a problem down the road. Also, if my itouch is a 8G, why does it show only 6.5 GB as the capacity? Thanks for any help!!

    To reduce "other" sometimes a restore from backup works but many times a restore to factory defaults is required. I would not be concerned until ti gets to 1 GB though.
    The difference between the 8 GB iPod total capacity/storage capacity and 6.5 is due to the iOS taking up some of that difference by a lot of it is du to the difference of how BG is calculated. See:
    http://wikimediafoundation.org/wiki/WMFJA051/en/US?utmmedium=sitenotice&utm_campaign=20101223JA056&utm_source=20101223_JA028C_US&count rycode=US

  • What is the Category field for and how do I edit it?

    In the iTunes music list, there is a category field. However, I do not see it in the get info window. Not surprisingly, although the category field shows in my iTunes music list, none of my songs have anything entered for the category. What is this field for and how do I edit it? Thanks.

    The only items I have that show a category are some iTunes U downloads.
    You can see a list of iTunes U category and subcategory codes and associated names here: http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/iTunesUintheiTunesSt ore/chapter13_section3.html

  • What is the pop-up page and how do you disable it?

    When I read through documents in Acrobat XI, a small, miniature version of the page pops up on the upper right hand corner. It is surrounded by a dark gray border with a white box inside that shows me where I am on the page, and the message "page X of Y" appearing at the bottom. What is this?  I searched the manual (the Help and Tutorials document) in vain to find out what this is, I've Googled it, Bing'ed it.  No dice. Hovering my cursor over the image does not reveal anything either.   What in the heck is this thing called, and how do I disable it? It is very distracting and not very useful.

    I am aware that you can turn it off by clicking on the "x" (which is barely visible).  However, this is only temporary. When I scroll down to the next page, the box pops up again. So I have to click if off on every page. What I am looking for is a way to completely disable this function so I don't have to deal with it to begin with. Thoughts?

  • What is the output of Maya and how does Java use it in animation.

    What type of software is used and what input and output files are created in the animation process?
    From what I read:
    Maya is used to create polygon structures, perform rigging, and it attaches surface textures which are made in Photoshop. Then Maya creates key images or positions of the animation. Next Maya exports an image and a data file to do the neccessary transformations. Finally, Java uses the image and the data file to paint the images and their position based on the game logic's use of the data file.
    What have I missed or described wrong?
    I also need more clarity on the input files to Java and how Java stores and uses these files. The use of Maya images and files seems different. Is Maya or Java doing the transformations or are they both doing them? How does this work?
    Thanks for your help
    Jon

    Thanks for the explanations. What this means in my situation is that tags are an unnecessary way of spending a lot of time making my file system more complicated, without adding any value whatsoever. Without tags, I can find any of my 3,000 files with a few clicks. (On my computer, Spotlight has cobwebs. I very rarely need it, but it's wonderful when I do.) Now that I know how tags work, I can ignore it.
    A human being can only perceive a quantity of seven without counting or grouping; hence we arrange things in structures to keep the number of entitites low on each level. You don't need to count three objects to know that they are all there, but you do need to count twelve objects. Which is why Home Alone was believable. We sort screws and nails in jars and toolboxes have compartments. Even the grocery store has a hierarchical arrangement. You don't find steaks in the bakery section, or breakfast cereal in the produce department.
    Some people aren't organized, and that's not a bad thing, but no folder, no tag, and no group is going to change a fundamental personality characteristic.
    Thanks everyone for showing me that in my case, there's no point to tags. That saves me a lot of time.

  • The mac book pro cannot detect the internal speaker. What's the possible causes? and how to fix it?

    I've connect the mac book pro to my LED TV with the headphone port as my audio output. After I disconnect it, the internal speaker did not work and the mac could not detect it from the system preference. What is the problem? Is it because of the hardware or software problem? Please help.

    Please detail all you have done to resolve your issue.  Need this information so that the users can avoid the "been there, done that" scenario type responses.  This is to avoid repeating the troubleshooting you may have already tried.  Thank you.

Maybe you are looking for

  • Problem with JSF 1.2 and Tomcat 6

    Hello guys, I have here: Tomcat 6.0.10 JSF 1.2_04_b10_p01 I followed these steps without success: http://forum.java.sun.com/thread.jspa?threadID=787962 http://forum.java.sun.com/thread.jspa?threadID=5156242 Here what I did: 1) Removed the following l

  • CRM 5.0 to R/3 BP Initial & Delta load problems

    Hi Experts, I am having problems trying to replicate a BP to R/3 (ECC). The BDOC status is all green and it shows 'Processed'...but my BP is not created in the OLTP side!!I have followed all the steps from the best practice document - CRM is the lead

  • Getting error Failed to check in document from ODC to UCM 11g

    Hi: I am getting the below error while trying to commit image from ODC running on windows to UCM 11g running on linux SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302

  • Easy DMS - object linking DIRs

    Hi, I'm implementing Easy DMS currently running version v6.0 SP9. Everything is working well with SAP DMS except for one thing, object linking. I've read other threads but no help. My issue is I want to be able to show a DIRs relationship with other

  • Is the output of java -version reliable?

    Hi, As part of an installer, I'm trying to write a script to check that the user's JRE is recent enough. With all JRE's I tried I noticed that the first line of output from: java -version is always of the form: java version "1.3.1" Can I rely on this