What's the largest font size in the Accessibility settings? 5c

Those numbers are irrlelevant on an iDevice. They make sense for printing only. Use the size that best suites you.

Similar Messages

What's the best settings to Export movie for smaller file sizes?

Hi, I've been working on some helmet cam footage which was taken with Xvidmpeg4.avi and was advised to convert it to dvavi for editing in PrE, this created a huge file to work with, the original footage was 206mb and the finished edited dvavi file is now 1.56gb, what settings can I use to export the movie with a much smaller file size, but hopefully try to retain some quality, to upload to places like Vimeo? I thought I would try to export it in the same as the original footage Xvidmpeg4.avi thinking this might compress it again to something like the 206mb of the original and the original was good quality footage, but PrE just hangs up with a box stating 'Xvid Status (Not Responding)' and when I try to cancel that the whole thing crashes and closes? So when I go to File > Export > Movie, what would be the best settings in:
General > File Type ?
Video > Compressor
lots of options under compressor if I select the file type as Microsoft AVI, so I'm guessing something under that would compress it to a smaller file size but what, I could spend all night trying different settings so hoping for some advice?
Or, if I'm completely in the wrong place for the settings and should be doing something else please tell me?
Thanks, Gav

Thanks for the replies, but to me it's still confusing - simply because there are so many settings, if I go to Share/Personal Computer I'm then presented with a whole load of settings
NTSC Flash Video
MPEG
DVAVI
Windows Media
QuickTime
and under each of those is a lot more advanced settings?
I'm guessing I wouldn't use flash or quicktime, so which of the others would I use and what are the advanced settings to use as I can't find anything that is .wmv or .mov
What I've done with other videos that I've exported from PrE as dvavi is then to put it through Windows Movie Maker, Publish Movie, This Computer, then put the settings to Windows Media DVD Quality (PAL) (3.0 Mps) - this seemed to be the only setting that reduced the file size considerably but still had good quality, but it's still about twice the original file size?
This all seems long winded to me, open original file, convert original file, output another file, then output the file again in something else which then results in loss of quality and a larger file than the original? I'm ending up with lots of files, was hoping just to edit in Premiere then export/publish that edited clip and that would be it, then upload to the net.
Is it not possible to just edit my original footage and save it, just like you would with something like a word document, should I be using something else and not Premiere?
Thanks.

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

Apple TV: what are the specific settings I should adjust to?

Hi, there
I really need your help now. I use a DVD ripper to rip DVD to MP4 for Apple TV. I am trying to achieve quality that is close to a movie (m4v) from iTunes. What are the best settings to get this type of quality? I am not concerned with output file size, and I just want to get the very best quality I can. If so, what are the specific settings I should adjust to? The program I am using allows me to adjust video and audio parameters as below:
Video parameters:
Codec: h.264
Resolution: 1280*720
Bit rate: ??? (it is said Up to 5 Mbps, but what is the specific bit rate?)
Frame rate: 24 fps
Audio parameters:
Codec: aac
Sample rate: ???
Bit rate: ??? it is said 16 to 320 Kbps, but what’s the specific figure?
Audio channel: mono, stereo and 5.1 channel, which one should I choose?
Following are the tech specifications I copied from Apple’s official website:
Video formats supported
H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
Audio formats supported
AAC (16 to 320 Kbps); protected AAC (from iTunes Store); MP3 (16 to 320 Kbps); MP3 VBR; Apple Lossless; AIFF; WAV; Dolby Digital 5.1 surround sound pass-through
And I have selected some parameters according to this, please see the above contents, but there is no info about specific video/audio bit rate, audio sample rate, and audio channel. I just wanna know if I want to watch the movie on my 1920×1080 TV, what are the specific settings I should adjust to?
Any suggestion is appreciated. Thanks in advance.

Well, then how about playback Apple TV uncompatible video files? I have some other video files(such as avi, mkv,not DVD), and I also have a video converter, i know i can convert them to m4v, mp4, or mov that supported by ATV,but the thing is that i still don't know the best specific settings for conversion. Any suggestion? Many thanks for your kind reply.

What are the best settings for a retina display image?

If we Export for Web then view it on a retina display monitor, the image lines look blurry and it's not as crisp as non-retina display monitors.
What are the best settings when intended for retina display monitors while keeping the file size down?
Thanks!

Mark, yes a DVD will play back on a HDTV, just the quality will not match the capability of the playback device. This is certainly the easiest approach though.
As the article you referenced says, ensuring that your previews are set to a larger pixel dimension than your required output will ensure maximum quality, given that you will more than likely have movement on the images in the slide show I would suggest going with pixel dimensions that are at least 1920px.
Let us know how you go.
Tony

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
Tools > Protection > Encrypt < Encrypt with Password
Answer YES to change the security.
A new window opens:
     Do NOT select Document Open (or that will require a password to open the document.)
     Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
     Change the following 2 settings from the drop-down box:
          Printing Allowed: Select High Resolution
          Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
          Leave selected: "Enable text access for screen reader devices for the visually impaired"
          Change Permissions Password (insert a strong password)
          Leave all other settings alone in "Options"
          OK - OK
          Re-enter the Permissions Password (the one you entered above)
          OK - OK
          Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the quicktime settings to convert mpg4 files to streaming video?

What are the quicktime settings to convert mpg4 files to streaming video?

http://www.tansee.com/what-is-mp4-video.html
"hint tracks" are required. QuickTime Player Pro can add them.

What are the normal settings to connect to wifi?

I visited my friend over the weekend and her school required me to change my airport settings in order to connect to the internet. Ever since I got back, I have been unable to connect to my usual wifi source. If I can, it drops off after a few minutes. What are the normal settings to connect to wifi?

As a minimum, the following would be the "normal settings" to connect your Mac to an unsecured Wi-Fi network. These settings can all be found in System Preferences > Network > AirPort or Wi-Fi > Advanced
TCP/IP tab: Configure IPv4: Using DHCP
Proxies tab: Nothing should be checked on this tab, except the "Use Passive FTP Mode (PASV)" option.
Hardware tab: Configure: Manually
On the Wi-Fi tab, you may also want to delete any Preferred Networks that you are not using.

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC. My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service. This came with a new modem/router combo made by Cisco and is model DPC3825. Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service. Should I be setting the Cisco modem/router to Bridge mode or the TC? Should I have Shaw disable anything? Any insight is greatly appreciated.

Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What are the best settings for ripping cd's in the AAC format?

I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

mysteryroach wrote:
My questions are: What are the best settings for ripping cd's in the AAC format?
It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
Yes. Just put them in a playlist and burn.
Does the AAC format have VBR like the MP3 format?
Yes. You will see it as an option in the Import Settings.
Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

What is the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc. tiff? psd? 16bit? dpi?

What are the best settings to use in the export manager when exporting from Aperture 3.5 to Photoshop cc for editing?
Should I use tiff or psd?
8bit or 16bit?
How many dpi?

That will depend on the photometric resolution of your originals. For jpegs it would be a waste of space to convert them to a higher resolution than 8bit, but if your images actually have already more than 8bit, you will want to preserve this quality. Then he 16bit format will help to prevent color clipping.
Both tiff and psd will preserve the lossless workflow. With Photoshop as external editor I would use he psd format for better support of layers and transparency, e.g., when you want to create watermark files.
The dpi will only matter, when you export the file for printing.

What's the largest font size in the Accessibility settings? 5c

Similar Messages

Maybe you are looking for