What's the "Line In" on the diagnostic and how to use it?

I'm just really curious about this. I was looking through the diagnostic screen on my iPod and went to the "Line In" choice. I selected it, and pressed Action like it said and it didn't do anything. What is the Line In function on this and what can I do with it and use it?
Another thing is I've installed Rockbox on mine and have used it for 6 months, and it has a Recording feature on it, and for a source to record from, I can select Line In or Microphone and I'm wondering if this is the same thing.
Thanks!

hi
<b>
USEREXIT_PRICING_CHECK</b> (module pool SAPMV61, program MV61AFZA)
You can install additional checks to the standard checks of condition lines (e.g. maximum/minimum value).
<b>USEREXIT_XKOMV_ERGAENZEN_MANU</b> (module pool SAPLV61A, program RV61AFZB)
You can use this user exit to change the ready-for-input fields of the manually entered condition record in add mode in the condition screen.
Just have look below link
http://help.sap.com/saphelp_40b/helpdata/es/14/f62c7dd435d1118b3f0060b03ca329/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/14/f62c7dd435d1118b3f0060b03ca329/frameset.htm
regards
vinod

Similar Messages

  • What are the advanteges and disadvanteges of using pl/sql over hibernate

    i knwo that pl/sql are well structure and provide a lot of functionalities with oracle databse , but my question is the hibernate might give some advnateges of scalability over pl/sql.
    so what are the advanteges and disadvanteges of using pl/sql over hibernate?
    and does oracle recommend using hibernate for connecting JSP with oracle 11i , or it is better to connect the JSP pages with oracle databse using pl/sql ?

    812643 wrote:
    but if i search for the diferencess then there are a lot of opinions about this ..., specially when they say that with hibernate you can integrate with any DB , and it provides object printed architecture, etc.All databases are not equal. This is a basic and fundamental fact. SQL-Server is not Oracle. Oracle is not SQL-Server. As it is the case with Sybase, Ingres, DB2 and other database products. They are all different. And there are some very core differences between them.
    So how would a product like Hibernate treat these database products with their differences? By using the lowest common denominator. Which means your expensive database product is dumbed down - and even MS Access will likely have better and more features.
    You also need to decide what is the "permanent" part in your architecture. What is going to the core? What is the expensive part? The app server (with Hibernate)? Or the database server?
    What are you likely to change next year? The app server server? Or the database server?
    In the vast majority of cases, the core is the database server. That is your biggest expense and investment. As it should be - as it holds that which is most precious to business, data. You want to ensure the integrity of that data. The accuracy of that data. Make sure that it can be easily backed up and recovered. Is flexible to use. Etc. Etc.
    The database server is the core - and that is where you need to realise your return on investment. By using the database server to its full extent.
    Hibernate does not do that. And in that respect, it is junk.
    Why does it not do that? Because many Java developers are totally and fully clueless about what database servers are and how to use them. And want to use them as little plug-in black boxes - bit buckets that are only there to provide a data persistence layer. Instead of using the database server to its full extent, they instead use Hibernate, and try to do their own "+database thing+" in the app layer - and do it poorly and with utter lack of any scalability. (and no, only ignorant Java heads think that scalability means throwing more money and h/w at it)
    My largest database processes billions of rows per day, every day, 356 days a year (between 350 to 450 million new inserts into a single table per day). And have been for several years now. It does so using PL/SQL. Using Oracle to its full extent. Then there are Java heads that cannot even design and code an app that effectively process 1% of this volume... and grasp at straws like Hibernate and other Java cr@p to "fix" this - when the actual problem is their total lack of ignorance in how to use and scale the database server.
    Hibernate is trash - and a symptom of Java developers's ignorance of database technology.

  • I was recently trying to buy 'Cloudy With a Chance of Meatballs' for my IPad, but it will not let me purchase the film, what is the problem and how can I fix it?

    If someone could help out, it would be greatly appreciated

    AnnoyedAppleUser2 wrote:
    I was recently trying to buy 'Cloudy With a Chance of Meatballs' for my IPad, but it will not let me purchase the film, what is the problem and how can I fix it?
    If someone could help out, it would be greatly appreciated
    What does "it will not let me purchase it" mean exactly? Are you getting an error message?

  • What is the cloud and how do i use it

    what is the cloud and how do i use it

    This link is a little old, but this helps explain it:
    http://www.ihelpboard.com/2012/01/what-is-icloud/

  • The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
    I have read that the battery can swell and that would put pressure on the trackpad.

  • What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects?  e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

    What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects?  e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

    What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects?  e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

  • What is the risk, and how to detect, Trojan infection with Flashback/Flashfake? (PowerMac G5 OS X 10.5.8)

    What is the risk, and how to detect, Trojan infection with Flashback/Flashfake? (PowerMac G5 OS X 10.5.8)

    Hey Kappy, without even looking I can tell you anything is better than the GeForce4MX cards, but see
    See japamacs page here on the best AGP cards for G4s & G5s...
    http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
    Rated slowest on top, fastest on bottom, hopefully japamac will drop in shortly.
    Oh, & they need way more RAM...
    http://www.everymac.com/systems/apple/powermac_g4/specs/powermac_g4_933_qs.html
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=155&type=Memory

  • I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?

    I purchased Lightroom 5, loaded it on my Mac, and updated to version 5.6. I then tried importing photos from my Sony DSC-RX100iii. Unfortunately it only imports JPEG files but no RAW files. What is the problem and how do I fix it?

    Than LR should have brought in the RAW files as well. ACR is the RAW
    processing engine used by LR under the covers so anything not supported by
    ACR would not be supported by Lightroom.
    Are you shooting RAW plus JPEG? By default, Lightroom will stack then
    unless you tell it not to. Check to see if there is a small badge on the
    preview that looks like two sheets of paper with a number. That is how
    Lightroom indicates a stack. You can unstack them by clicking on the badge.
    There is also a menu item to stack/unstack photos. Otherwise, I would have
    to research but not sure why Lightroom would ignore the RAW photos but
    still import the JPEGS.

  • My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    Need Help Ye,
    boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

  • What are the adv and disadv of using SRM as an addon?

    Hi Friends
    what are the adv and disadv of using SRM as an addon
    Regards
    Simha

    Hi Simha,
    Here are my view points on SRM and ECC one client deployment: The decison to have one client for SRM and ECC is more driven by the business model of the client and functionalities one need out of SRM .Following points needs to considered before deployment:
    1) ERP and SRM as an add-on does not support any multiple-backend functions or hub deployment for procurement.
    2) Upgrade or migration from SRM system to ERP with SRM as add-on is not supported
    3) Strategic sourcing scenarios in SRM are not used by clients with such deployments
    4) Although SRM is running on the same client as ECC the purchasing organization have to be maintained in both MM and SRM system
    5) From HR Orgstructure stand point there is no additional benifit in same client deployment as compared to seperate deployment
    6) From Security stand point its better to have a seperate client for SRM-vendor registration as this functionality is exposed to outside world and internet.
    7) Master Data Synchronization is a positive point which is only available within the SRM Add-on deployment with ECC
    8) For SRM and ECC (seperate) master data management remains asynchronous and unidirectional
    Thanks,

  • I have to re-install acrobat standard 9 becaus of 'unable to extend license procedure (148:3)'. Where can I download? Or better to upgrade to XI (what is the price and how to do this)

    I have to re-install acrobat standard 9 becaus of 'unable to extend license procedure (148:3)'. Where can I download? Or better to upgrade to XI (what is the price and how to do this)

    Hi riffpizcy,
    Error 148:3 is a licensing error.
    Try following the steps mentioned in the KB: Error "Licensing has stopped working" | Windows
    You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
    You can upgrade from Acrobat 9 to Acrobat 11 Pro at $199 USD
    Please refer: Buying guide | Adobe Acrobat XI Pro  for more information.
    Regards,
    Rave

  • I have created a form & added it to my website. It tests ok but....on top of the the form is a message ....An error has occured.....What is the error and how do I find It ?

    I have created a form & added it to my website. It tests ok but....on top of the the form is a message ....An error has occured.....What is the error and how do I find It ?
    REM

    There are various was to return a filled-in PDF form but many require some detailed information about what product the person filling in the form will be using.
    As noted above the form can be filled out and faxed or snail mailed to you.
    Since Acrobat 3 the form could be submitted to a scripted web page and have the web server perform the tasks necessary to return the data to you.
    Since Acrobat 6 the creator could add special "Extended Form Rights" to the form so users with Reader version 5 or better could save the form and email the form.
    For mobile devices the app the user will be using will determine how or if the form can be returned.
    Do not allow users to use Apple's Preview application on the Macintosh. It will corrupt the form in many ways.

  • My iPhone 4 home button doesn't always work. sometimes its just not responsive. other times, it works great. what's the problem, and how do I get it fixed? my iphone  is 2 days old

    my iPhone 4 home button doesn't always work. sometimes its just not responsive. other times, it works great. what's the problem, and how do I get it fixed? my iphone is 2 days old

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    -Griff W.

  • I have a problem when you run Firefox to download a claim this tool (askToolbarInstaller-1.12.2.0.exe) What is the solution and how to prevent download scent tool.

    I have a problem when you run Firefox to download a claim this tool (askToolbarInstaller-1.12.2.0.exe) What is the solution and how to prevent download scent tool.

    i have the same exact problems too and it's starting to bother me further more...

  • Often my iphone4  just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?often my iphone4  just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?

    often my iphone4  just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

Maybe you are looking for

  • How do I delete a toolbar that was added when I downloaded a program?

    I am using Firefox 7.0.1 and Microsoft Windows XP Professional Ver. 2002 Service Pack 3. I would like to delete (get rid of NOT hide only) a toolbar that was downloaded to Firefox when I downloaded a program to print internet coupons. The toolbar is

  • Dcnm install with red hat X11

    Hello I would like to know if i can install dcnm for red hat with X11 forwarding , X11 is working , but I can't lauch .bin here the result: sh dcnm-installer-x64-linux.6.3.2.bin Preparing to install... Extracting the JRE from the installer archive...

  • Identify duplicated authorization objects in a role

    Hi, We built some roles manually by drag and drop transaction through the menu tab. In some roles, we have duplicated authorization object For example, in PM : Maintenance Plant (object I_SWREK), we have 2 profiles with SWERK=* and TCD = (list of tra

  • Sapscript logo inverted

    Hi. We were having problem with the printing of logo in sapscript. WHen we use LOCL the company logo is inverted. We had this problem when we replaced the printer we r using as LOCL. Please advise what to do. What are the possible solutions to this p

  • Getting airport to stop sending?

    So, I need to access my airport's settings, but in order to do this, I need to go into system preferences, and hit the stop button. The problem is that the stop button doesn't actually do anything. It blinks blue, then nothing happens. What can I do?