What's the maximum ammount of connection the Stratus can support

i wonder as if the Stratus service has a limit of connections.
also wonder as if it is stable enough to ran when i try to use it in a project like realtime web game.

at this time Stratus has no limit on the number of connections a developer may use. we ask that if you will have more than 10,000 simultaneous connections that you contact us first.
while Stratus has historically been quite stable, it is a non-production-quality, beta, free, "as-is" experimental service. it is for experimental, developer, non-commercial use only.

Similar Messages

For CRM 5.0 what is the ECC version supported

Hi,
Can any one help on this
For CRM 5.0 what is the ECC version supported?

ECC 5.0 onwards,
lower versions can also be integrated using some plug-ins
hope this helps
additional info:
SAP ECC 6.0 and subsequent releases will automatically contain all integration interfaces that so far have been contained in the SAP R/3 Plug-In and that ensured the technical integration with other SAP Components.
Customers who run SAP R/3 4.6C, SAP R/3 Enterprise 47x100 and 47x200, and SAP ECC 5.0 will receive additional integration interfaces in a Support Package for PI 2004.1. The delivery of this Support Package will be synchronized with that of mySAP Business Suite. The 2005 delivery is in November as part of Support Package 10. Information about the delievery from 2006 onwards are take place here
This rule applies only for customers with a SAP R/3 Plug-In release PI 2004.1. Customers with PI 2003.1 or older must first upgrade to PI 2004.1 or SAP ECC 6.0.
No new interfaces will be provided for integration between new SAP component releases and SAP R/3 3.1I to 4.6B.
Message was edited by: RH

What does the RunTime engine support?

Hello,
Does anyone know what functions the RunTime engine supports? Or is there a
NI link I can follow. Some goodies like the VI server don't seem to be
supported in RTE 5.1.
6i any different?
Thanks
Martin

I know about the paths, but I had problems with getting the username with
the Open application reference, an error came up 'function not supported'
and a pointer to the VI that caused it.
It's my mistake to say the VI server was not included. But are the
Application properties (web etc) included ?
Thanks
Martin
"Dennis Knutson" wrote in message
news:[email protected]..
>
> I use VI server with the run time engine all the time. When you build an
app,
> you have to specify which vi's are called dynamically so that they are
included.
> Paths parse out a little differently too when you've got a built app.
Sometimes,
> all it takes is an extra Strip Path.
>
> "Martin E" wrote:
> >Hello,>>Does
anyone know what functions the RunTime engine supports? Or
> is there a>NI link I can follow. Some goodies like the VI server don't
> seem to be>supported in RTE 5.1.>6i any different?>>>Thanks>Martin>>

What are the objects that support documentation?

What are the objects that support documentation?

Hi
Master data is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
If characteristics have attributes, texts, or hierarchies at their disposal then we speak of master data-bearing characteristics.
Few types of Master Data
1) The master data of a cost center contains the name, the person responsible, the relevant hierarchy area, and so on.
2) The master data of a supplier contains the name, address, and bank details.
3) The master data of a user in the SAP system contains his/her access authorizations to the system, the standard printer, start transaction, and so on.
Use
When you create a characteristic InfoObject, it is possible to assign attributes, texts, hierarchies, or a combination of this master data to the characteristic. If a characteristic bears master data, you can edit it in BW in master data maintenance.
Master data for a characteristic is uploaded into BW using an InfoSource with direct updating.
You can also update characteristics with master data flexibly. In this case the InfoObject becomes the data target or InfoProvider. However, you must explicitly declare the InfoObject in the InfoObject maintenance to be the InfoProvider.
See also InfoSources with Flexible Updating.
Learn more @
http://help.sap.com/saphelp_nw04/helpdata/EN/28/4c1738da41e57ee10000009b38f842/frameset.htm
Regards
AB

What are the objects that support variables?

What are the objects that support variables?

Using Variables: The Variable Wizard and the Variable Editor
Definition
Variables are parameters of a query that you defined in the Query Designer and that are filled with values when you execute the query or Web application. They serve as a store for characteristic values, hierarchies, hierarchy nodes, texts and formula elements, and can be processed in different ways.
The processing type determines how a variable is filled with a value for the runtime of the query or Web application.
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
Variables are reusable objects. This means that when you define a variable for a query in the Query Designer, this variable can be used in all other queries. Variables are not dependent on the InfoProvider, only on the InfoObject. A variable that you define for an InfoObject is available in all InfoProviders that use this InfoObject.
Use
Variables enable you to customize queries flexibly (parameterize the query) possible. If you use variables in the Query Designer, do not select any fixed characteristic values, hierarchies, hierarchy nodes, texts, or formula elements. Instead, set up variables as place holders. These are then filled with values when the query is running (when you insert the query into a workbook, when you refresh the workbook or when you execute the query on the Web. You can use one query definition as the foundation for many different queries if you use variables.
You want to create one query for all the people responsible for customer groups, who each only evaluate the data for one customer group. In the Query Designer, you insert a variable for the characteristic u2018customer groupu2019. Just before the query is executed, decide for which customer group(s) you want the query to apply to.
There are two tools in the Query Designer for designing and changing variables.
The variable wizard takes you step-by-step through the process of defining a variable. Each individual step is context-sensitive and is adjusted according to the combination of variable and processing types used. This means that the variable wizard only offers the selection options that are permitted for that combination of variable and processing types. For more information, see Defining Variables with the Variable Wizard.
The variable editor dialog box offers all of the selection options for changing an existing variable. The individual fields in the dialog box show the settings affected in the variable. You can change these settings here. If you want to make the changes using a step-by-step process with explanatory texts, you can jump to the variable wizard using . For more information, see Changing Variables in the Variable Editor.
Integration
The variable wizard and the variable editor are functions in the Query Designer and are context-sensitive.
In principle, the two dialog boxes appear wherever you can enter constants (that is, values) in input fields. One of these input fields is the Entry of Variables checkbox. If you select this option, the following options for using a variable appear, instead of a fixed value:
·        The variables that are available appear in the dropdown box for the input field. You can select a variable from the dropdown box.
·        The symbol Change Variable appears next to the Entry of Variables checkbox. You can change the variable using . The Variable Editor dialog box appears.
·        The symbol New Variable appears next to the Entry of Variables checkbox. Choose if you want to create a new variable. The Variable Wizard dialog box appears.
By way of an example, when defining conditions for the value limit of the condition, you can not only enter fixed values but also formula variables. Mark the Entry of Variables checkbox and you can then use the options described above. The settings are context-sensitive so that the formula variables that only those formula variables that are available appear in the dropdown box. The variable wizard is set up automatically in the same way for entering formula variables.
You can also get to the variable wizard and the variable editor from the context menu of those objects for whose values you can define variable placeholders. From the context menu, choose New Variable. The SAP BW Variables Wizard appears. In the context menu for variables that have already been defined, you can choose Edit. The SAP BW Variables Editor appears.
In the InfoProvider objects dialog box, you select a characteristic (for example, Order) and from the context menu, choose New Variable. You reach the variable wizard, which is already set up for you to enter a characteristic value variable.
In the InfoProvider objects dialog box, you select a characteristic value variable and from the context menu, choose Edit. You reach the variable editor where you see all of the settings for the variable. You can make changes to the variables here.
Variable Types
Definition
The type of variable being used. This determines the object that the variable represents as a placeholder for a concrete value.
Structure
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
·        Characteristic Value Variables
Characteristic value variables represent characteristic values and can be used wherever characteristic values are used.
If you restrict characteristics to specific characteristic values, you can also use characteristic value variables. See, Restricting Characteristics.
·        Hierarchy Variables
Hierarchy variables represent hierarchies and can be used wherever hierarchies can be selected.
If you restrict characteristics to specific hierarchies or select presentation hierarchies, you can also use hierarchy variables. See Selecting Hierarchies
·        Hierarchy Node Variables
Hierarchy node variables represent a node in a hierarchy and can be used wherever hierarchy nodes are used.
If you restrict characteristics to specific hierarchy nodes, you can also use hierarchy node variables. See Restricting Characteristics: Hierarchies
·        Text Variables
Text variables represent a text and can be used in descriptions of queries, calculated key figures and structural components.
You can use text variables in the description of calculated key figures, restricted key figures, selections and formulas when you create them. See Defining Calculated Key Figures, Defining Restricted Key Figures, Defining Selections, and Defining Formulas.
You can change the descriptions in the properties dialog box. See Query Properties Calculated Key Figure Properties Restricted Key Figure Properties, and Selection/Formula Properties.
·        Formula Variables
Formula variables represent numerical values and can be used in formulas. See Defining Formulas.
In addition, numerical values are used for selecting exceptions and conditions and you can also use formula variables here. See Defining Exceptions and Defining Conditions
You can use a formula variable for the interest rate in order to process the current interest rate, after you have executed the query or Web application.
http://help.sap.com/saphelpnw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm_

What is the process of supporting project?

what is the process of supporting project?

Hello,
Please check the following article:
http://support.microsoft.com/kb/317789
Microsoft does not provide support for the Crystal Reports products that are included in Visual Studio because Crystal Reports are SAP products. Support is only available from the SAP-provided free forum.
For more information, visit the following website:
SAP Community Network Forums
http://forums.sdn.sap.com/index.jspa?categoryID=1
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the application can able to deploy in Weblogic

What are the application can able to deploy in Weblogic Server ?
We have one desktop application which developed by .net and its database in SQL Server.
My Question is
Is it Possible to Deploy this application in Weblogic Server ?
Or kindly advice me what technologies can helpful for me to access via PDA
Thanks in Advance
Hameed
Edited by: Hameed on Mar 10, 2013 12:44 AM

User, this question is better asked on the {forum:id=570} forum.
This more depends on the specification of your app and has nothing to do with jdev or adf.
Timo

Tried to Change my Apple ID email - but it tells me it's my rescue email address, despite having deleted that rescue email address. What in the world can I do?

Hello all!
I'm in a bit of a quandary. I have three email addresses, and I'm TRYING to pare down the number of addresses that I use. Thus, I am trying to change my Appple ID to one of those email addresses. Having said that, I tried to Change my Apple ID (which is an email address - one of the ones that I need to get rid of) to one email address that I constantly use. However, the screen tells me that the new address I wish to use, is my rescue email address, despite having deleted that rescue email address. What in the world can I do? I'm about sick and tired of Apple ID's.

Ok I'm goin to call your old Apple ID #1 your new email you want to use #2 and another email #3.
- go to http://appleid.apple.com
- select manage your apple id
- sign into #2
- edit primary email and change it to #3
- save changes and sign out
Now
- sign into #1
- edit primary
- change it to the email that was used for #2
- save changes
- check #2's email inbox for verification email
- verify account
If done correctly you should be fine, also in terms of #3 that would be an email you have that you dont mind being an apple id that you wont use. Sorry for the funny way of explaining just thought it would be shorter to type out lol.
Note: Once changes have been made you must sign out of features such as iCloud, iMessage, FaceTime, iTunes & App Store as they will still display the old Apple ID. Sign in with new email but same password as normal.

What is the Adobe Contact Support Phone # for flash?

What is the Adobe Contact Support Phone # for flash?
I searched and tried this number. Flash isn't list as one of the options for help in the extentions. Any help would be great. Thanks
All other product help
800-833-6687 begin_of_the_skype_highlighting 800-833-6687 end_of_the_skype_highlighting
Monday–Friday, 5am–7pm PST

They might not specify product-specific phone numbers (or if they do, maybe not for every product).
The number you mention is what also I see at:
http://www.adobe.com/aboutadobe/contact.html
(and click on the "+ Phone Numbers) link)
If you have own your copy of Flash, I'd imagine that this general ph# will be able to get you through to somebody appropriate, ti field your install or activation issue.

Which kind of the CPU can support the FMLE3 to encoding the h264 format

The Signal is yuv or pcm stream , i use the fmle3.0 to encoding to the h.264 format.
Once started.the CPU utility rate is going up to the 100%.
I want to konw,which kind of the CPU can support the live stream.
In other words,My require is encoding the one live stream the cpu utility rate is below 30%.

These are the system requirements:
http://www.adobe.com/products/flashmediaserver/flashmediaencoder/systemreqs/
Other people may have real-world experience to share...
Jody

What's the highest iOS support by iPad1?

What is the highest iOS version the original iPad will support? Or better yet does the original iPad support iOS 5.0?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

What's the work can we do for the position SAP-Workflow developer live link

Hi,
I got the requirement as a workflow developer.
The requirement is to work as a SAP-Workflow live link open text developer.
What does the live link open text means?
Early reply is highely appriciable.
Regards,
Chow.

Hi,
OpenText is a company providing different document management and archiving solutions. LiveLink is one of their archiving solutions. (Just use Google for more reference.)
My guess is that you need to work with a workflow process that involves archiving of scanned invoices.
Regards,
Karri

What is the latest prod. supported MaxDB Version w. SAP Content Server 6.40

What is the most actual supportet MaxDB Version when using with SAP Contentserver 6.40?
In PAM Page 5 (of the Powerpoint) the official Version should be 7.5.
In "install and Upgrade" NW 7.0 there is the "NW 7.0 Presentation - MaxDB Release 7.6.03" available for Download and the "MaxDB RDBMS 7.7.06 Build 10 - Windows Server on x64 64bit "
Does that mean, that the 7.7 Version is official supported for Production?
Searched the Notest but found no answer for that.
Ulrich
... half an hour later ...
just found MAXDB 7.7 Installation which suggest the 7.7 is the latest official supported.
could that be the answer?
Ulrich
Edited by: Ulrich Neumann on Feb 2, 2010 12:39 PM

Hello Ulrich,
Please refer at SAP link http://service.sap.com/pam for full platform availability information of the new version. SAP Content Server is shipped with NetWeaver 2004s SR1.
< service.sap.com/pam -> SAP NetWeaver 04 -> Database Platforms -> Content Server
   Select in MAXDB section u201CWINDOWS SERVER...   u201C >
< according PAM :
MAXDB 7.6 64-BIT is released on WINDOWS SERVER 2003/X64 64BIT for
SAP CONTENT SERVER 6.40 >
As you know the SAP installation guide for Content server is available at::
service.sap.com/installations -> SAP Components
->SAP Content Server -> Release 6.40 and higher
< Installation - Standalone Engines >
For additional information and documentation please go at SAP link:
http://service.sap.com/ContentServer
-> FAQs SAP Content Server
Thank you and best regards, Natalia Khlopina

What is the program can run this flash

hi all, I download some flash from this funny site
http://www.funny-pictures.com/
but i can't run it in my computer , means my computer not my
browser , i run it only into flash programs as flash editor or
macromedia flash 6 (open it and click file menu and choce open and
search it), I want to open it directly , just click it to open
without any program

If you know the job name, than you can find out the associated program name.
Go to SM37.
Select your job from the list
Select "Step" ... here it will show you the program name
Put cursor on the program name and Go to > Variant to know what was the input to run this job.
Regards,
Naimesh Patel

What are the digital publishing supported devices ?

can any one told me what the devices are supported the digital publishing ( mobile devices and tablet device ) with the pixel dimensions for each please ... or any one know any article or web site can tell me that info ?

If you mean phone handsets then there is no Adobe viewer for them.
The only 3 supported platforms are ipad, Android Tablet and Blackberry Playbook.
The Playbook resolution is 1024x600 like the droids.
The Iphone and iPod touch don't have a viewer. You can output to flash, if the device supports it but the lack of zoom makes it uncompelling.
If you have Device Central as part of your suite, it includes a very wide database of mobile devices and their capabilities. I'd start there. But DPS will not run on them as it stands today...
Andy

What's the maximum ammount of connection the Stratus can support

Similar Messages

Maybe you are looking for