What's the maximum RAM for this notebook (ze2000)?

Hello,
i want to find out, what's the max memory for notebook ze2000 (p/n: EF062EA#ABU)
Andrius
LTU

Hi:
According to the service manual for your notebook at the link below, maximum is 2 x 512 MB for 1 GB.
Chapter 1, page 1-3.
http://h10032.www1.hp.com/ctg/Manual/c00400869.pdf
I would run the free Crucial Memory scanner and see what it reports.  1 GB seems pretty low for the hardware in your notebook.
http://www.crucial.com/systemscanner/
Paul

Similar Messages

  • What's the maximum RAM for this notebook (C742EM)

    What is the maximum RAM size for this notebook?

    Hi,
    The following link shows its specs and max size is 2Gb
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01179737&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is the maximum RAM for 2.16 GHz 24 in DDR2 iMac Early 2006

    What is the maximum RAM that I can install on iMac 24 in 2.16 GHz DDR2 Early 2006 model?

    Is this your Mac:
    http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-24-inch-sp ecs.html
    I had the same model: officially it'll support 3 GB RAM; some people added 4 GB and it ran fine, but it will only address about 3.2 GB. I decided that wasn't worth it and made do with 3 GB.

  • What's the maximum ram for G4 1Ghz?

    Can someone please tell me what's the maximum ram I can install in my PowerBook G4.  It currently has 1 Gb Ram.
    Thank you.

    See:
    http://download.info.apple.com/Apple_Support_Area/Manuals/specs/powerbook/L24362 A_EN.pdf
    Processor and memory
    • 867MHz or 1GHz PowerPC G4 processor with Velocity Engine
    • 1MB DDR SRAM level 3 cache • 133MHz system bus • 256MB or 512MB of PC133 SDRAM; two SO-DIMM
    slots support up to 1GB
    Message was edited by: kennethfromtoronto

  • HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

    HP Pavilion DV2700 VERVE Special Edition
    Operating System  Windows Vista 64 bit Service Pack 2
    Year made 2007 
    Processor AMD Turion 64 X2 TL- 60 2.0 GHz
    Current Ram 4GB
    would like to know what is the max ram 
    PS 
    Can i install and other Processor or is this and intergrated one with the motherboard.? 
    In Advance thank you for your time to look at my question
    Indarktimes
    This question was solved.
    View Solution.

    Hi
    Please find the link given below for your model off unit Max Memory supported is 4GB.
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • What is the maximum ram for the zd 8000

    I have a zd8000  what is the max. ram this will take.
    Thanks
    This question was solved.
    View Solution.

    zd8000 is more like 2009 or so. Here is the Service Manual:
    Manual
    The series started out as a Socket 775 Pentium 4 machine but I believe by the end of the run, with a BIOS update you could actually use Core2 Duo processors in it and it could take up to 4 gigs of RAM and run 64 bit Windows. The model numbers ran up into the zd8400 range, if I recall. They are enormous machines which are essentially desktop computers in a laptop case but lots of room in there so easy to disassemble and work on. 
    There should be a tag on the bottom with the full model number. The Manual does not really describe the later versions very well. It is a pretty rare beast, you do not see very many of them. 

  • What is the maximum RAM for 2008 MacBook pro

    I've seen some here say they have 8gb. Manual says 4 is max. What is the correct number?

    You're welcome.
    My late 08 Uni also states 4GB Max but been running 8GB for a year now.
    Same with my 1 month old late 2011.  Specs says 8GB Max.  Been running it with 16GB the day I bought it.
    I have Crucial installed in both my Macbooks.
    If your MB works for you, then just use it with the RAM upgrade so it can last you for awhile.  You'll see a difference in speed.
    Another thing to check is your hard drive.  If it's almost full, delete some files you're not using and clear your cache memory once in a while.
    An almost full hard drive also slows down your MB.

  • I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

    Help Me.
    What is the best solution for this problem ?

    Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
    Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
    -and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
    -plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

  • I want to upgrade my macbook pro 15-inch i7 2.3GHz memory and I want to know what is the maximum RAM it could take

    I want to upgrade my macbook pro 15-inch i7 2.3GHz memory and I want to know what is the maximum RAM it could take

    Welcome to Apple Support Communities
    It looks like you have got an Early 2011 or newer MacBook Pro, so you can use 16 GB of RAM. You can buy more RAM at OWC or Crucial. Remember that you cannot upgrade RAM in MacBooks Pro with Retina display
    In case you have got a Mid 2010 MacBook Pro, you can only install 8 GB of RAM

  • What are the tables used for this Report

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.
    9994262112.

    hi
    good
    try with these tables,
    MARA
    KNA1
    thanks
    mrutyun^

  • What r the tables used for this report.

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.

    Hi Ashok,
    this is easy to do.
    Open Two SAP Screen with same user ID.
    Run SQL trace using ST05 transaction.Open ST05 transaction in One and make
    Trace on ,Run the report in another screen.
    Once report run is over.End the trace process and click on display trace in same ST05 transaction.There is a click button on ST05 Transaction screen to start trace
    process,End trace process and Display track process.
    The SQL trace will  give you all the table details which is used in that particular report.
    You have not mentioned about the report name so I have suggested this way.
    regards,nishant
    Please reward if this helps

  • What’s the best practice for this scenario?

    Hi,
    My users want the ability to change the WHERE and/or ORDER BY clause at runtime. They may define user preferences on each screen ( which is bind to a view object). They want to see the same records based on WHERE/ORDER BY defined on the last visit. That is why I keep the users preferences and load the screen based on that, using :
    View.setWhereClause(...);
    View.setOrderByClause(...);
    View.executeQuery();
    This works good when only one user working with the application but faced low performance when more than one user working with the application.
    What are the points to increase the performance and what is the best practice for this scenario?
    Thanks for your help in advance.

    Sung,
    I am talking only about 2 users in my testing. I am sure i missed something but could not recognize that.
    This page is my custom query page including a tag to instantiate app module in stateful mode at the top <jbo:ApplicationModule..> and a tag to instantiate data source <jbo:Datasource...> and release tag at the bottom <jbo:ReleasePageResources..> and some java code in the middle(body). The java code constructed the query statement and then fires the query to set the view object based on the query statement using the above methods.
    So, I am facing very slow performance(speed) when two clients load this page at the same time. Looks like the entire application locks for others when one client load this page and fire the query. i realized the battle neck is where executeQuery() is executing.
    what do you think.
    Thanks in advance for your comments.

  • My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    Hi,
    You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
    You can find a sample scripts if you google around.
    What do you mean "how to map any API to our staging table" ?
    You should do at least the following mapping (which column(s) in the staging table will provide these information):
    - the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
    - the value set values and  description
    Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

  • Satellite A300-1EI - What is the best RAM for upgrading to 8GB?

    HI,
    I wanna put 8GB RAM in my laptop.
    I just want know what is the best RAM type that will be supported with my pc configrations
    Here are my laptop configration:
    PC Information]
    Model Name Satellite A300
    Part Number PSAGCE-00C006AR
    Serial Number 98023166Q
    OS Version Microsoft&reg; Windows Vista^TM ^Home Premium 6.0.6001 Service Pack 1
    BIOS Version 1.70
    CPU Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
    Physical Memory 3072MB RAM
    Hard Disk Capacity 318,497,964,032 Byte 296.624GB
    Hard Disk Free Space Capacity 119,216,168,960 Byte 111.029GB
    Video ATI Mobility Radeon HD 3470 version=8.477.0.0
    Screen Resolution 1280 x 800 Pixels
    Color Quality True Color (32 Bit)
    Sound Realtek High Definition Audio version=6.0.1.559
    Network Realtek RTL8102/8103 Family PCI-E FE NIC version=6.217.226.2009 MAC Address=00:1E:33:5D:34:7B
    Intel(R) WiFi Link 5100 AGN version=12.2.0.11 MAC Address=00:21:5D:1C:21:E4
    Modem TOSHIBA Software Modem version=2.1.77.0
    Internet Explorer 8.0.6001.18783
    IDE Device TOSHIBA MK3252GSX
    TSSTcorp CDDVDW TS-L633A FW version=TO01
    EM4141J HVI042H SCSI CdRom Device FW version=1

    Hello
    Im wondering that you want to upgrade to 8GB RAM... Normally 3 or 4GB should be more as enough for all applicaions at the moment.
    Anyway, as Jayjay said its not possible to upgrade to 8GB. A friend of me has a Satellite A300 and the user manual says that it can upgrade to 4GB or 2GB (depending on the chipset). So if you have a PM965/GM965/RS690M chipset you can upgrade it to 4GB. Otherwise you can only use up to 2GB.
    I have upgraded my Toshiba notebook with Kingston RAM. This is high quality RAM and has a good compatibility. I never had problems with such modules.
    Check this!!
    Bye

  • What is the maximum ram upgrade possible on a Mid 2011 iMac 21.5-inch

    I have an iMac 21.5-inch, Mid 2011 running OS X 10.9.5 which currently has 4 GB 1333 MHz DDR3 Ram. The Hard Drive has 149.87 GB free out of 499.25 GB. It has been running slow for a while now. I would like to know what is the "TRUE" maximum Ram Upgrade possible. The reason I say "TRUE" is because the specs say one things when I find others saying another. I would like to install the maximum Ram that will increase the speed to its optimum. I have read some information that this particular computer will not take advantage of anything past a certain amount of ram.
    So with all that said, I am asking for specific numbers, types of ram, suggestions etc etc...
    Thanks

    Here's what you can do and need:
    Maximum Memory
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
    Sources for memory I recommend are:
    OWC
    DataMem
    Crucial.com

Maybe you are looking for