What's the most appropriate Adobe app for creating interactive apps and websites?

I recently had a potential customer call wanting someone to create an interactive website for customers to use on an iPad in his lobby. Ideally, I'd like to be able to incorporate cool animations, transitions and open video elements. I have no idea what to use to create something like that, and looking at the Adobe apps, I'm more confused than ever. A web search suggested InDesign could do it, but now it looks like Muse might be more appropriate...or maybe Edge Animate.
I'm guessing you Muse experts will have the right answer. Time is limited, but I'm committed to learning this new skill so I want to focus on the right software. Help?

Edge Animate would be a good choice to create animated and interactive content - http://html.adobe.com/edge/animate/.
You could then insert Edge Animate content directly into your Muse website. Take a look at this article - http://helpx.adobe.com/en/muse/tutorials/inserting-edge-content-muse-website.html.
Thanks,
Vinayak

Similar Messages

What is the most suitable image format for processing with imaq?

Hello.
What is the most
suitable image format for processing with imaq?
I want to capture an image of a usb webcam, store and
then process it with imaq. I need to know what format to save the
captured image can then load and process it with imaq vision.
Thanks

The only criteria is: don't use JPEG for anything scientific! The compression involved with saving JPEGs means you always lose information. I tend to prefer PNG - it's compressed, but non-lossy, and also widely supported. TIFF is fine as well, but I don't think has any advantages over PNG for this application. JPEG2000 can give good non-lossy compression I think is slower to read/write than PNG.

HT4623 What is the most current iOS version for iPhone 3G?

I have an iPhone 3G, what is the most current iOS version? I have 4.2.1 and when I tried to update, iTunes says that I have the current version. I can't seem to download any apps with 4.2.1.

That is correct,
The last release of iOS to support the 3G model was 4.2.1, released on November 22, 2010
The 3G model is now 4 and half years old.

What is the most appropriate way to do reversal and reconcile the reversed

Dear All,
I am facing a problem to reconcile reversal transaction. The scenario as below:
Date 28.04.2008 Company A issue billing to Customer XYZ amount 3,000 MYR
Date 30.04.2008 Company A want to reverse the above transaction.
Questions:
1.Where is the most appropriate menu path to do the reversal?
2. If the reversal needs to be done via menu path: Financial module à Reversal Transaction, then how to reconcile both items to ensure system will read as cleared items?
3.The purpose of Question no.2 due to have same result upon executing customer ageing report regardless using Journal Posting tab or
using Sales Document tab.
Thank you in advance for your kindly reply.

For the function you mentioned :reverse transaction
under the Financial module
you could refer to note:1004113 for more detailed information
To update a journal entry such that it will auto-reverse at a later date follow the steps below:
1. Go to Financials -> Journal Entry.
2. Open the journal entry that needs to be reversed.
3. Place a tick in the box 'Reverse' and a new field for the reversal
date will be displayed.
4. Enter the date when this journal enrty is to be reversed and click
on 'Update'.
For the customer aging report ,there is one case that could explain the difference between 'by journal posting' and 'by sales document':
In case an Invoice has been partially cleared by an Incoming
Payment, the transactions created by these documents will be displayed
as fully open when you run the report using Due Date by Journal Post.
However, if you run the report using Due Date by Sales Doc., the Invoice
will be displayed with its open amount only.
A common occurrence is that exchange rate differences and/or conversion differences were posted without the user having specified to reverse them at a particular date.
Could you explain more about your case?
Best Regards
Helen Sun

What is the most effective way to write Statement to catch and reverse errors during query excution?

Hello my friends:
I am wondering what is the most effective way to deal with errors, specifically in a
Stored Procedure.
I wrote something like this:
BEGIN TRY
BEGIN TRANSACTION
/*My statements goes in here*/
IF ERROR_NUMBER() = 0 -- Do I need this line?
COMMIT TRANSACTION;
END TRY
BEGIN CATCH
IF ERROR_NUMBER() > 0 --Do I need this line?
ROLLBACK TRANSACTION;
END CATCH;
It would make sense using the if Statement when attempting to log errors.
Just too many variations.
Thanks

Also read this great article
http://sqlblog.com/blogs/alexander_kuznetsov/archive/2009/05/13/your-try-block-may-fail-and-your-catch-block-may-be-bypassed.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

What is the different between JMS Client for sonicMQ 4.0 and sonicMQ 6.1?

hi everybody,
I'm currently in big crisis and hope somebody out there
can give me some guidance.
We have a JMS client developed by an ex-colleague. The jms client was
developed specifically for SonicMQ 4.0. Recently, we are upgrading to
SonicMQ 6.1 and thus, we re-compile his code. Before re-compiling his
code, we had put sonic_Client.jar and sonic_Crypto.jar in the library
directory. There was no error.
We were able to startup our receiver client without error. The receiver
subscribed to the SonicMQ server 6.1 successfully. We could see it in the
SonicMQ Management console. However, when we send a topic, the
receiver client does not consume. All of us had been working day and night
to find out the answer but no progress until now.
We have a couple of properties file and I think, jmsconnect.properties file is
the one been used. This is the content:
# Must enter value if JNDIURL below, is not specified
BROKER=mssonq:2506
JNDIURL=
MODETYPE=com.sun.jndi.ldap.LdapCtxFactory
TOPICCONNECTIONFACTORY=
QUEUECONNECTIONFACTORY=
The previous version that was developed by my ex-colleague is still running
fine in the current production server.
Please let me know if the jmsconnect.properties is correct or wrong. By the
way, what are the major code changes required for jms client that was
meant for SonicMQ 4.0 to get it upgraded for SonicMQ 6.1.
Any help will really appreciate.
thanks & regards,
Kenny

AT&T is a GSM carrier. Sprint and Verizon are CDMA. The CDMA iPhone 4 has no SIM slot. The CDMA iPhone 4S does but the phones still can't be used on GSM in the U.S. The software versions are the same across carriers at this time.

What is the most appropriate way to generate a static IPv6 for a domain controller?

DNS Role Best practives is giving errors. Looks like I need to assign ONE static IPv6 to each domain controller and use IT in DNS and DHCP. There are two routers on the network, each assigning a 2002: IP, plus a link local FE80: IP is also assigned.
Is there a way to generate a static IPv6 for domain controllers that will not change even if the network cards or routers are changed?
What is the best practice so that domain integrated DNS and DHCP with Exchange 2010 in the domain, will continue to function?
There is ambiguous information as to whether DC's should have static or dynamic IPv6 IPs. I have tried variations such as IPv4 compatible. IPv4 mapped, ISATAP, etc. but over time have gotten different errors from different sources.
It is one thing for Microsoft to give error messages about IPv6 but I cannot find any definitive recommednations on this.
Thanks if anyone finds a universal answer.
Bob.

Excellent and valid points, Bob. Your outlook explains in an easy way how the challenges setting up Windows Server are in a sense, self-generated, and in every sense fully avoidable.
No changes have been made to the warnings or errors in 2013 R2 despite improvements in other areas. This release mainly brought improvements to the setup in areas that were truly broken like automatic account generation for ADFS. Since that's a decade old
feature it's probably best not to wait for Microsoft to clarify, and I appreciate your recommendations.
I'm bumping this thread since it's the first result for 192.168.1.1 on ipv6 on Google right now, and since there's no way to see how often it's being referenced I wanted to add some additional information.
Multiple NIC's can be specified by using the scope ID parameter supported since Vista, that appears as a percent-sign at the end of IPv6 addresses. It uniquely identifies the network adapter even when that adapter shares the same host portion of the IPv6
address space (i.e. essentially, has the same IP, which in IPv4 is invalid.) I'll give some examples at the end of the post.
Following the recommendation to deprecate the fec0 prefix while maintaining a link-local addressing scheme is possible through the prefix length at the beginning of the IPv6 address. As
this reference at IBM explains, fe80:: maps to a link-local prefix length of 64 equivalent to the IPv4 version of 24, and anything else before the double-colon refers to the network portion of the IPv6 address.
The host portion of the IP address then _could_ be ::20, ::21, etc., as you said, but to follow
this MSDN recommendation, it would be more appropriate to use the same host portion and add a suffix for the scope ID documented on that page. The suffix may be specific to Windows
and may not work in an equivalent way in heterogeneous platform deployments. But since the effect is limited to the local machine it should help anything past XP differentiate NICs when assigned the same host portion.
The approach taken in the random IPv6 generator linked elsewhere on this page leaves open the possibility, however unlikely, that the generated IP can route to some other host on an open network that happens to have generated the same network portion of
the address (the other host would be sharing the same network.) If any part should be random, it's the host portion after the double-colon, not the network portion at the beginning, so that the possibility does not exist.
Additionally, the host portion doesn't have to be random, it's just done that way because it's usually automatically generated; a random number is safer for a computer than relying on a sequence that may not fully cover all the numbers used so far. If you're
doing a manual deployment you can combine the above information with the inline 0-supression in IPv6 to assign numbers in the following way:
fe80::1:1%1 (first computer is 1:1, first interface is %1)
fe80::1:1%2 (second interface)
fe80::1:2%1 (second computer, first interface)
Effectively here we're swapping "192.168.1" for "fe80::1" which is roughly the same length (taking into account variations like 10.0.0). The only gotcha is that _either_ the string after the double-colon can't be 1 by itself since that's
reserved for local machine loopback, _or_ that the second-to-last number after the double-colons can't be 0, since that's equivalent due to inline supression.
Other combinations are fine, like fe80::2%1 and fe80::2%2 for the first computer, then ::3 for the second, etc. I thought having a 2-index for the first machine is too uncommon to look familiar so I chose the alternative, but even something like fe80::fe%80
is perfectly fine.
If you don't need to identify individual NICs then omitting the part after the percent sign makes fe80::10, fe80::11 a valid sequence for 2 computers. For over 255 computers just add another number before the last, so that it looks like fe80::1:10, fe80::1:11,
etc. That should be easier to remember than the randomly generated numbers.
There is also another way if the preference is to use IPv4-lookalike addresses. The mapped address spec is defined in RFC 4291 and it goes along the lines of "::ffff:192.168.1.1" for a valid IPv6 address to the gateway, for example. That is a newer
recommendation than the RFC which the random-number generated linked elsewhere on this page relies on.

What is the most recent software update for mac

I have a recent MacBook pro and the most recent software update is over 1gb! I just wondered what it was? M

Michaelbe3 wrote:
I have a recent MacBook pro and the most recent software update is over 1gb! I just wondered what it was? M
A really recent MacBook Pro would be running Lion, Mac OS 10.7, and the most recent update is 10.7.3. The delta update from 10.7.2 was found to cause problems and rather than fix them, the update was pulled and Lion users were directed to the "combo" updater which contained all the code necessary to update any Mac running Lion from any previous version of Lion, which is a lot of code, hence the very big download. BTW, 10.7.3 has been problematic for some software so it would be wise to explore the comments and complaints in the Lion forum before you update since you can't go back if you change your mind without having a good backup. Also BTW, this forum is for the Mac Pro; you have a MacBook Pro, which has its own forum and can probably provide you with more useful information.

What is the most popular Video format for pc's and Mac's to just play

I made a video that had some shots in HD using my Canon HG10 and some shot were regular NTSC. I made a final quicktime output, and gave it to my client. It plays the sound but not the video. So I condensed the video to a smaller format NTSC w/ 16:9 aspect ratio, and no she says the quality is almost not playable. Everything plays and works fine, even the same files that I give to her. She also wants to be able to play the video in loops. What is the best program for a PC to do that?
Thank you

Try exporting in Uncompressed 8 bit or Animation. Also save the file in the Quicktime Player to play in High Quality. If you export in NTSC/DV, quicktime will play a low quality version by default. Go to Window > Show Movie Properties > Video Track > Visual Settings, and check the High Quality checkbox and save the file.
I wouldn't recommend H.264. It's a lossy codec for mobile devices and the web.

What are the mandatory fields of BAPI for creating a new purchase order?

Hi friends,
I am very new to XI.My Boss has given me task to create a purchase order using BAPI. I want step by step guide to create it.How will i know which fields are mandatory for BAPI_PO_CREATE?

Hi Shweta,
However It depends upon the configuration that which fields to be passed.
But you can check this by running the BAPI in the SAP system by using transaction Se37.
The most commanly used fields are:
HEADER :
DOC_TYPE                       NB
CO_CODE                        9001
PURCH_ORG                    9001
PUR_GROUP                    900
VENDOR                         100000
ITEM
PO_ITEM                        00001
MATERIAL                      MM10
STORE_LOC                   01
MAT_GRP                       01
SHORT_TEXT                  SERVICE (optional )
PLANT                            9001
NET_PRICE                    500
ITEM_SCHEDULE
PO_ITEM                        00001
SERIAL_NO                      0001
DELIV_DATE                     05.04.2008
QUANTITY                                  1.000
You can run the BAPI with some test data... if something is missing the BAPI will ask for it... the Results are displayed in Return Table.
Regrads,
Sachin

What is the most effective way to get ospf to function and what is the basic command structure

I am doing a project of ospf and need to know if I am on the right tract somehow these commands are not working and wondering if I am doing something wrong.

Hello,
I would say the basic configuration for OSPF should be:
1. router ospf 1
         2.   Router-id 2.2.2.2 ( if you want to hardcode the router-id else you can go with the default which would be the highest interface on your router)
         3. Network 192.168.0.0 0.0.0.255 area 0 (telling the router * I care about the 192.168.0 part of my ip and the last part can be anything thus the 255)
    4.      Net   192.168.2.2 0.0.0.255 area 0 (telling the router * I care about the 192.168.2 part of my ip and the last part can be anything thus the 255)
OR for the 192.168.0.0 and 192.168.2.0 you could just have 192.168.0.0 0.0.255.255 meaning I only care about 192.168 and 0.0 can be anything.
The four lines above would be my basic config for ospf. Also have a look at these links, they provide some insight into ospf and how it should be configured. http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_ospf/configuration/12-4/iro-cfg.html#GUID-588D1301-F63C-4DAC-BF1C-C3735EB13673
http://www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
I have also experienced that I cannot configure all OSPF commands on PT but prob GNS3 allow all configs.
HTH.
DJ.

What is the most robust excel app for ipad2?

I know there are apps that allow you to work with excel, like documents to go, but I use formatting and cosmetic design in excel . . .
which app works best with excel sheets on iPad and also allows for more robust formatting, etc?
Thank you!

I think: Oracle is suitable for enterprise-level DBs, MSSQL for medium or small ones.

What's the most appropriate upgrade path?

Hi,
Not sure I'm posting this in the right place, so if it's wrong, I apologize! It's been years since I've considered upgrading Photoshop on my computer (I like what I have, and hadn't really felt the need or desire to upgrade), and since that time, a lot has changed. Because of my lack of desire to keep track of the latest changes, I find myself extremely confused now that I am actually looking to upgrade, which is the reason for posting this.
The general idea is that I'm currently using Photoshop 7, and when last I peeked in on Photoshop, that was as straight-forward as it needed to be. 7.0 was Photoshop, that's it. Now what's confusing me is what would be the best version to upgrade to? The obvious questions to follow -- what do I need it for? Varied. I do some web design, I do some photo touchups, and I do other aspects, such as getting ready to start production on an ezine (this is the primary reason I'm considering an upgrade, as I don't feel Photoshop 7 provides everything that I need to do that), for which I'd like to design a simple spread. What gets me is what all these new variations of Photoshop actually are, and what route should I be looking to go so that it's still the Photoshop I know and love, but upgraded and with the various improvements and such? I realise that might sound vague, but essentially I don't want to have to learn a whole new product just to enjoy the features that I already enjoy and know how to utilize, if that makes sense.
Anyone that might have an idea on that?
Thanks in advance!

Hi John,
Thanks for the response! I feared I might be too far gone at this point, but I do still have designs on getting back into the "now" with Photoshop. Full price was semi-expected, it just means a bit longer of a wait .
What got me confused in the first place was the need for and the primary difference between Elements and CS. I haven't changed since Version 7, obviously, and prior to that it was Paint Shop Pro, which wasn't filling many needs. Point being, you had your choice of one company's product or another (no extra versions), without the variations. So, I was getting stuck on which version actually was or would be closest to what could be considered the full version a la Version 7 back in the day. It appears that's going to be CS, as opposed to Elements, which is perfectly fine, I just found myself so confused with the different versions/products!
Thanks for your help!

What is the most recommended receipt scanner for iMac or MacBook?

Looking for a good dependable receipt scanner with MacOS (Mountain Lion) user friendly software. I've read some info about the Neat for Mac but too many negative reviews about it's software. Please me with this if you know of any other.

Any Scanner will work, Fujitsu Scanners come with Abby Scan...
http://scanners.fcpa.fujitsu.com/scansnap11/s1100.html
VueScan handles almost any scanner & has OCR in it to make Text out of it...
http://www.hamrick.com

What's the most reliable san solution for fcpx

We are a small in house production team and we have 4 macs running final cut x and we are looking to centralize our storage to a SAN. We would be editing off of it. Any suggestions?

Have you seen this?
http://www.fcp.co/final-cut-pro/tutorials/1017-superb-walk-through-tutorials-on- making-trails-with-final-cut-pro-x-on-shared-storage
The Shared storage issue is a big one and the must have a plan to solve it in the pipeline or they will never get post houses to use FCPX.

What's the most appropriate Adobe app for creating interactive apps and websites?

Similar Messages

Maybe you are looking for