What's the password to logon the 3560 series switch on express setup

what's the password to logon the 3560 series switch on express setup

Hi Samuel,
The 3560 doesn't have a password configured on it by default. You may want to double check the procedure for accessing Express Setup in case a step was missed:
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3560/hardware/quick/guide/3560gsg_08.html#wp49930
If that still doesn't work, you can reset the switch to factory defaults by following this guide:
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3560/hardware/quick/guide/3560gsg_08.html#wp46478
Hope that helps.
-Mike

Similar Messages

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

HT1586 What's the best HDMI switcher to use for Apple TV?

What's the best HDMI switcher to use for Apple TV? My widescreen TV has only one HDMI outlet and it is in use.
Thanks,
Joanna

Anyone sold by MONOPRICE.COM are really worth buying!

What is the approximate range of Airport Express for iPad2?

What is the approximate range for Airport Express to use with iPad2?

Clearly the range is impacted by the walls in the transmission path. However, I was able to get about sixty feet. As this was no different than that with my Westell-7500 modem/router ("g" standard) from Verizon, I returned the Express.

What are the rules about switching versions?

I thought projects created in iMovie 9 showed up in iMovie 10, but I just tried creating a new project in iMovie 9 this morning and it is not showing up in iMovie 10, even though I see projects from 2013 and before in there.
Also, what are the rules about switching versions? I know iMovie 9 much better, so can I start a project there and finish it in iMovie 10? I would like to gradually learn iMovie 10, but not all at once.
I assume that once a project is edited in iMovie 10, it can't be worked on in iMovie 9 anymore.

You have to update iMovie 9 projects to iMovie 10 from within iMovie 10 before they will appear in iMovie 10 as iMovie 10 uses a completely different project/event file system. After updating you can still work on projects in iMovie 9 but you won't see any changes made in iMovie 10 and you can't transfer them back.
I would have a good look at the iMovie 10 help files first since a lot is changed and some features have been discontinued that might be important to you.
In order to try out iMovie 10 on just one of your iMovie 9 projects, put the folders just for that project in a separate iMovie Projects and iMovie Events folder and hide the project and event folders containing the projects you don't want to update from iMovie 10 by enclosing them in a higher level folder (only projects and events folders in the Movies folder of the boot drive or at the root level of another drive or partition will be visible to iMovie).
I did it this way and I'm glad I didn't try to update evrything at once!
Geoff.

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?

What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?

150 feet in clear space with no obstructions in the signal path. It is not possible to predict range with any obstructions in the signal path.

I now have 4 itouchs, 1 ipad mini, and three iphones for my own family members. What's the bet way for me to setup itunes so that we can all share the same music, apps, movies, shows, etc?

I now have 4 itouches, 1 ipad mini and 3 iphones in use by my direct family. What's the best way for me to set things up so that we can all share the same music, apps, movies, shows etc?
I would prefer to have one account to input dollars which allows all the users (my direct family) to share and buy things.
Can we all have different user ID's however share the same account?

I'll try to help a bit.
ITunes match space is different to icloud space. With iTunes match you get storage for 25,000 non iTunes purchased tracks and other than a limit for individual file size, there is no memory limit.
You can turn match on individuallyon each device (I have it turned off on my iPod but turned on on my iPad and iPhone). When you turn it on then you get access to all the tracks, and in my experience any playlists I create have transferred over very well. I understand that some people have had trouble with playlists though.
I'm not quite clear with exactly what you mean regarding cleaning up your library, but be careful about using Match for this. There is no guarantee that matched songs will be exactly the same version as your own copy, due to some mismatches, so you could find some problems there. Personall, I am cleaning up my library before matching, but I am rather particular about keeping my library the way I want it. If you aren't as fussed then match could be the answer.
Hope that helped.

What Are The Proper Settings In Audio/MIDI Setup?

In the Audio Input, Line In, what is the proper setting for Hz? 44100, 48, 96, And should the 2ch be 16bit, 20bit or 24 bit? Right now I'm using an older gray iMic as the Audio in
Thanks

Steve B5 wrote:
what is the proper setting for Hz?
44100
And should the 2ch be 16bit, 20bit or 24 bit?
16 is standard, 24-bit (new to GB4) is the highest resolution

What's the deal with Final Cut Express HD and me?

A few months ago, I encountered a lot of problems when I was trying to capture some HD video using Final Cut Express H.D. I've set my camera (a JVC GR-HD1U) to the MPEG2 setting, and I changed the set up in Final Cut to Apple Intermediate Codec 1080i60. The good news is that I was able to capture for about 15 seconds. Then the capture stops, and a message comes up telling me that I have reached the end of the tape. Only I haven't.
So.....what's the deal here?
Is there something that I am overlooking, or doing wrong? Or is it just not meant to be for me to capture HD Video?
If someone could let me know, I would appreciate it.
Thanks everyone.

Am I right in thinking this camera isn't compatible/on the supported list? Does it work with iMovie? Perhaps you could capture there and import into FCE?
I see in your earlier post Manson Root had captured from this camera successfully. Perhaps they will reply again.

What are the control functions of Suitability and setup type key in work center?

Hi all,
Can any1 plz tell me what is suitability and setup type key in workcenter default values tab?
what are the functions controlled by these keys?

Hello,
Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
Almost in all the PP we define same Control key to the work center as well in the routing.
For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
Regards,
Piyush

What is the use of switch control ?

when i go to switch control and add a new switch as screen tap. then i enable the switch control. what is the use of that? every time i tap i get the app switcher(multi task) which is good but to go to a certain app i have to tap home button 3 times. i dont know if im wrong. but in switch control i can add gestures but cannot find a way to use it. (simply if i can add special gesture like a swipe with 3 fingures and if i can get multitasker or siri or any other program it will be very use ful isn't it?)

Read these:
http://support.apple.com/kb/HT5886
User guide:
iOS 7 Switch Control - Technical Solutions Australia
http://bdmtech.blogspot.com.au/2013/09/new-in-ios-7-detailed-look-at-switch.html

What is the life expectancy of airport express?, What is the life expectancy of airport express?

What is the life expectancy of an airport express?

My guess.....3-4 years would be about average based on forum experience.
I have one that is 6 years old...been running almost 24/7, and have had one fail that was less than 6 weeks old, so averages won't tell you much since any electronic component can fail at any time.
Is something wrong with your Express?

What is the shortcut for switching to the previous window?

Hello everybody,
Sorry to trouble you with such a simple problem, but I can't find it in the "Help" menu. What is the key board shortcut for going back one window. From a folder window, I can click the left arrow (upper left) but what is the short cut? I thought it was holding the command key and clicking the left arrow key, but that does not work. Thank you for any help.
Marco

It was right there all the time.
Thank You.
Marco

What is the difference between switching between Iphoto libraries.....

...using iphoto and iphoto08? I ask because right now I have iphoto (what ever the latest before 08) i have so many photos i had to add some libraries, which by the way was not easy. Then to switch between libraries i have to close iphoto hold options button and click on iphoto then it tells me to choose a libary. When i try to choose it does not show all of my libraries. I also don't think I can have mulitipal libraries open at the same time. With iphoto 08 can I have more than one open and is it easier to find libraries and switch between them? Please help. I have quit using my iphoto be cause i am so frusterated!

mel8502:
Welcome to the Apple Discussions. As LH recommended the free version of iPhoto Library Manager will let you quickly and easily move between multiple libraries. I use iPLM to manage over 15 libraries and can move between them in a flash like this. Once you add a library to iPLM you can just use iPLM to open that library without having to go thru the Option key method and trying to remember where the library is located. Much faster with iPLM.
If you need to copy photos between libraries and keep the keywords and comments intact you can with the paid version of iPLM.
I do have one library that's 20,000+ photos in size and don't have any problems with it. However, you should have a backup plan for your libraries.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

What's the password to logon the 3560 series switch on express setup

Similar Messages

Maybe you are looking for