What's the right version of codes for this hybrid 6509?

I have a 6509 running CatOS on the Sup720 and IOS on the MSFC. I''ll be putting in a 2nd Sup720 as the standby, but not sure what are the right version of codes to load. Here is the hardware info and the Cisco release notes I found:
Active Sup: SUP720-BASE with PFC3A. Cisco recommends 8.3.3, minimum 8.1.1.
Standby Sup: SUP720-3B with PFC3B. Cisco recommends 8.4.2, minimum 8.3.7.
6548-GE-TX: Cisco recommends 7.6.9, minimum 7.6.1.
6516A-GBIC: Cisco recommends 7.6.9, minimum 7.5.1.
Thanks for any help.
Gary

This is not a supported Redundancy configuration:
Understanding How Supervisor Engine Redundancy Works
Note The redundant supervisor engines must be of the same type with the same model feature card. The WS-X6K-SUP1-2GE and the WS-X6K-SUP1A-2GE (both without PFCs) are compatible for redundancy. For supervisor engines with PFCs, the PFCs must be identical for redundancy (two PFCs, two PFC2s, two PFC3As, two PFC3Bs, or two PFC3BXLs).
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/redund.htm#wp1079325

Similar Messages

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

What is the factory setting pin code for my ipod touch?

im looking to make a purchase in app on my ipod touch and i need to switch off the restrictions under general settings. in order to this i need the pin code which is 4 digits. this must be factory set as ive not set it previously.
thanks

A: what is the factory setting pin code for my ipod touch?

There is no default setting. You have to set the passcodes. If you cannot remember them, then see:
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
Verify that you are using the latest version of iTunes before attempting to update.
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
Select the Summary tab.
Select the Restore option.
When prompted to back up your settings before restoring, select the Back Up option (see in the image below). If you have just backed up the device, it is not necessary to create another.
Select the Restore option when iTunes prompts you (as long as you've backed up, you should not have to worry about restoring your iOS device).
When the restore process has completed, the device restarts and displays the Apple logo while starting up:
After... [Show more]
Read other 6 answers

What's the optimum version of Safari for OS 10.3.9?

My first post here.
What is the optimum version of Safari for use on a PowerBook G3 "Pismo" running OS 10.3.9? I'm currently running 1.2 (v 125). I've downloaded 1.3.1 but when I try to install it says "Not compatible with this system." Is there some version in between that would work better? If so, I haven't been able to find it, and the Update Software feature doesn't find it either.
I did upgrade my firmware at some point, but I don't remember how to look up the version. Any help most appreciated.

Hi and Welcome to Apple Discussions
The highest version for Panther is 1.3.2.
Before you can install 1.3.1, you need to install 1.3. This may get you there: Apply the 10.3.9 Combined Update. Do not use the computer while the Installer is running. Once complete you'll need to restart the computer.
Then, via your Finder, go to your Applications>Utilities folder. Open Disk Utility. When open, click on the HD on the left, then First Aid Panel>Repair Permissions on the right. Once complete, open Safari.
When the Safari browser is open, go to the Safari Menu>About Safari. Which version are you using? If it is 1.3.2, then you're good to go. If it is 1.3, then run the 1.3.1 installer again. Once finished (I believe you'll have to restart), run the 1.3.2 update. Once the installer/restart is complete again "repair permissions".

What is the best version of Skype for Mac OS X Version 10.7.3

What is the best version of Skype for Mac OS X 10.7.3 users?

Minimum v5.3, but no reason to not go with v5.5.

How do i pick the right version of flashplayer for my lg optimus q phone

How do I choose the right version of flashplayer for my lg optimus q phone

Please try the Flash Player forum.

HT1338 what is the latest version of safari for mac air

what is the latest version of safari for mac air, every time I log into outlook it keeps telling me to get the latest version for Safari or Internet explorer

Thanks a lot, I am running Safari 6.0.5., I guess I will ignore outlooks message

What is the screen lock default code for iPod nano 5th gen?

What is the screen lock default code for iPod nano 5th gen?

There isn't one. You'll need to connect the Nano to your iTunes library and restore to factory settings. There is no other way.
B-rock

What is the latest version of Firefox for macs

What is the latest version of Firefox for Macs Ours tells us to update then it says it cant do it

Firefox 4 requires at least OS X 10.5 and an Intel Mac, so should work on your computer.
* http://www.mozilla.com/firefox/4.0/system-requirements/
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

What is the latest version of firefox for Mac?

I run Mac OS X 10.6.8 and Firefox 5.0.1. What is the latest version of firefox for Mac?

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

What are the right content conversion parameter in this receiver ?

Hi experts,
Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file.
Here is the receiver structure:
<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
        <SubBody1>
              <field1 />
              <field2 />
              <field3 />
              <field4 />
              <field5 />
        </SubBody1>
         <SubBody2>
              <field6 />
              <field7 />
              <field8 />
              <field9 />
              <field10/>
        </SubBody2>
     </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
Also Body can occure multiple times in the file but still will have this structure...Header and Trailer can occure only once in file.
What are the right content conversion perameters in this case?
Appreciate your help asap!T
Thanks
Jon

<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
         <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
        </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
if this is the input structure then FCC goes like this ....
Recordset:Header,Body,SubBody,Trailer
Header.fieldFixedLengths 10,20,30.. (based on you are structure fixed lengths)
Header.endSeparator - 'nl'
SubBody.fieldFixedLengths 10,20,20 (based on you are structure fixed lengths)
Body.endSeparator - 'nl'
Trailer.fieldFixedLengths 10,20,30.(based on you are structure fixed lengths)
Trailer.endSeparator - 'nl'
We might have to try out SubBody.endSeparator - 'nl' if Body.endSeparator - 'nl' does not insert a new line after each body record.
Cheer's

HT2311 What is the latest version of iTunes for Mac OS 10 version 10.4.11 ?

What is the latest version of iTunes available for Mac OS 10.4.11 and how do I download it?

Try using Software Update on your computer to install iTunes. Or see if you can locate iTunes 9.2.1.

What is the best version of Safari for an iMac G5 with Tiger?

I upgraded an iMac G5 to Tiger. Safari crashes often and does not support many new web sites, particularly those requiring Flash. Any suggestions? I have tried Opera and Camino both of which have problems when Flash is required.

The final version of Safari for Tiger was 4.1.3.
Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069
As regards Flash:
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

What is the last version of itunes for Tiger 10.4.11 and what is the link for the download

What is the last version update for itunes for Tiger 10.4.11 and what is the link for the update download?

Click here, or here if you're using a G3.
(119812)

What is the latest version of iMovie for MAC and how do I download it?

What is the latest version of iMovie and how do I download it? Will is work with MAC OS 10.6.8?

The current version may be obtained at the App Store. If you have an older version installed, then it should be available in Updates. The new version will not work with Snow Leopard.

What's the right version of codes for this hybrid 6509?

Similar Messages

Maybe you are looking for