What's the secret handshake?, Mobile Forms, LC ES2

So I have this
http://www.adobe.com/products/acrobat/readerforppc.html
and the picture shows a form being displayed and would seem to indicate I could send it a form specifically designed for mobile.
The question is.... How do I create a form in LC ES2 that the readerforppc will display?
I tried resizing the form and put a few fields on it and distributed it to my Windows Mobile email.......
The reader won't show it.
Anyone done this?

Try this link:
http://www.adobe.com/products/livecycle/mobile/windows_mobile.html
fom there you can also get more stuff for iphone and Blackberry

Similar Messages

4s iphone will not recognize Yahoo or juno only gmail what is the secret also what is the I cloud nonsense about?

First I never used an apple product in my life.. so I would appreciate assistance that recognized that issue.
Just go 4S iphone but first only using on WiFi
my android and XP stuff and even vista works fine.. so this is not a WIFf issue.
I am only able to set up Gmail
Yahoo does not work or Iphone will not pick it up.. and I went to an apple web page that had information
that I tried to load on the Iphone but Iphone will STILL not recognize Yahoo.
The dumb thing keeps saying my password is wrong... Funny I have not problem using the same
password on with my DESK top Xp and it WORKS> so it is not a password issue.
Same **** thing with JUNO.
I tried using POP.JUNO.COM and 110 and SMTP.JUNO.COM 587
and still the 4S Iphone refuses to work.
Yahoo too used IMAP.MAIL.Yahoo.com 993 SMTP..MAIL.YAHOO.COM 465
Still nothing........?
On web this seems to be a big problem....
What is the secret handshake I need to know to get operational????
I have spend days on the web and found no answers.

Anyone? Has anyone had experience with this problem? I've reset the extending Airport and reapplied the settings and still have the same problem.

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

What is the secret not to include the iPhone 5 in the comparison !

what is the secret not to include the iPhone 5 in the comparison !
http://www.apple.com/iphone/compare/

The iPhone 5 is no longer in production. To obtain specs for it, try looking at a third party reseller or cellular phone company site (or even amazon).

Re: (forte-users) Ok, what's the "secret" for setting serverside envi

Dear Robinson,
It seems to be that you have 2 ways of solving the problem:
1) restart forte after setting the environment variables
2) write a little application which sets the required variables, using
the task.part.OperatingSystem.SetEnv(name,value) method.
If you have to chage the variables rarely, then it`s easier to restart forte,
otherwise I would suggest to use the SetEnv function...
Best Regards,
Tamas Deak
"Robinson, Richard" wrote:
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
Tamas Deak
Lufthansa Systems Hungary
(forte developer)
2-6 Mazsa ter, Budapest, 1107, HUNGARY
(36-1) 4312 973
[email protected]
[email protected][email protected]-

Richard,
There is no way of changing the environment variable once the Node
Manager is up. You will have to shutdown the node manager and then restart
it to have the new environment variables take effect. Sorry, there is no
secret way of doing this that I know of.
But you can set the variables on you development machine and run you
application without distributing. This way the partition will be running in
your client machine and not the server.
Another way we have also got around this is by having a special
environment variable on the client side that opens a admin screen when you
run you application. This admin screen will allow you to change the
environment variables and then set them on the server partition. You will
have to do come coding on the server to make this happen but if you are
using a framework then it should be easy. We call this developer reconnect
facility. It only can be activated by the special client side environment
variable. I comes in very handy when we are development and want to change
the database on the server partition.
Hope this help.
ka
Kamran Amin
Framework, Inc.
303 South Broadway
Tarrytown, NY 10591
(914) 631-2322x121
[email protected]
http://www.frameworkinc.com/
-----Original Message-----
From: Robinson, Richard [mailto:[email protected]]
Sent: Thursday, November 04, 1999 7:23 AM
To: [email protected]
Subject: (forte-users) Ok, what's the "secret" for setting server side
environment varia bles when running in the Forte Development
Environment?
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

What is the secret to creating 3D interactive objects?

Recently, I touched a "squishy" 3D object on a game on an iPad, and now I am wondering: What are these objects and what is the secret to creating them? I am interested in adding some inheritance to my current 2d sprite objects in Visual Studio.
When I begin programming for iPhone and iPad, will such objects be standard graphics components?

The printer is an HP Photosmart C6280 all in one and it is connected by a USB wire. The HP devices show up on the dock but I can't seem to print from there.
Thanks

What's the secret to creating realistic gold text?

I've been using Illustrator for years, but I'm relatively new to simulating gold effects. I'm currently designing a sign for a developer. Unfortunately, the budget doesn't allow us to use hand painted gold lettering so we'll need to create this using a wide format, high-resolution CMYK ink jet printer. I don't have too much trouble with creating gold logos and geometric shapes, but getting the type to look realistic is a little daunting.
So with that in mind, what's the secret to creating a realistic gold text? What's the best gradation angle to use. Should I mix angles for logo, backgrounds, and text or try to keep it all about the same?
Thanks!

No such thing. All metals consist of 70% to 99% environment reflection blended with the absorbtion color, hence the trick to "realistic" metal shading is capturing the reflections and light, not working with arbitrary angles or whatever. It simply needs to follow the curvature of the text, that's the whole trick.
Mylenium

Settings...what is the secret

i have had a heck of a time generating HD clips that will play in QT on my own computer without "staggering,"
i can down load an HD movie trailer from apple (armored) that is bigger (1920x912 vs 1780x720), in millions and at 24 fps (mine is 30). the trailer plays, as far as i can tell, flawlessly. both in H.264.
what is the secret? what are they doing that i am not?

tom, that is what i think too, but darned if i can figure out what. spent about two hours on the phone with FCE product specialists at Apple that last two days, and they weren't ready to guarantee clean running. one suspected underperforming hard drives. what really distresses me is that i can see some of this staggering inside of FCE where it shouldn't happen.
i took an exported clip to another machine at a local connecting point store and the staggering still happened, suggesting that it was embedded in the clip somehow. i can scrub the clip in QT using the right arrow key held down and all the frames appear to be there, but when running, every approximately four seconds, it staggers.
i created a separate boot drive with a fresh install of leopard and put only my video card drivers and FCE on it. disconnected everything except the firewire to the camcorder and the USB for the keyboard to try to isolate the environment. it still happened. before i even put the video drivers in, i played the exported clip. every four seconds i got a horizontal distortion that moved from the bottom of the clip to the top. after i installed the video drivers, this became the stagger.
tomorrow i am going to a retail store with my camcorder to capture the same clip there and see if there is any difference. i don't believe it is the camera as i can hook it up with HDMI to a HDTV and it plays fine. i suppose there could be a firewire problem in the camcorder.
i am stumped and frustrated.
Message was edited by: Forrest Jerome1

What is the relation between adobe forms and web dynpro

hi
what is the relation between adobe forms and web dynpro

Hi Jyothsna,
Adobe forms are advanced to smartforms and scripts.
Adobe forms are much easier than smartforms they are online forms.
they can be developed online.
Adobe forms : This is another SAP tool designed to create your own forms. The transaction for this is SFP.
How to use them: You can create a sales order form in adobe form and send to the sales reps. Sales reps can fill this form when they are not connected to internet / SAP system. Once they connect to SAP just send an e-mail to a specific user id in outlook. You got to customize and code how do you want to process once you receive this form. This enables you to create orders even when you are not connected to the system. Hence no data loss. This is not how i used though :-). This is just my idea.
What is the difference between Adobe forms and smart forms / scripts.
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms. Many companies must be using this for hard copies / ALE / EDI or to transfer data from SAP to others.
Adobe forms are used to post data into SAP from SAP too. So this has an additional feature compared to smartforms.
Please check this link
http://www.erpgenie.com/index.php?option=com_content&task=view&id=600&Itemid=77
Web dynpro in one of the component in NETWEAVER.
Web Dynpro is the SAP NetWeaver programming model for user interfaces and provides support when developing the Web representation of business applications. The Web Dynpro model is based on the Model View Controller paradigm, and has the following features that build on the classic dynpro model:
·        Clear separation of business logic and display logic
·        Uniform metamodel for all types of user interfaces
·        Execution on a number of client platforms.
·        Extensive platform independence of interfaces
please check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Best regards,
raam

What is the secret to operating my HP printer with my i mac

What is the secret to operating my HP printer with my i mac. I can't get it to function properly. I think I have to go somewhere other than the HP icon.

The printer is an HP Photosmart C6280 all in one and it is connected by a USB wire. The HP devices show up on the dock but I can't seem to print from there.
Thanks

What is the tcode for Nominee Form 2 ?

Dear Mates,
Kindly help to me what is the Tcode for Nominee Form 2 ?
Ur's Mohan

Dear Sandeep,
Yes we have maintained IT 591 & i didn't any output in EPF report related to this info type 0591. Anyway now my client is asking me form 2 for nominee details kindly let me know is there any tcode?
Ur's Mohan

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

TS3899 I was hacked and had to change my yahoo password. I cannot get my iPhone or iPad to accept my new password. Am not receiving emails on either device. I had no problem changing my password on my computer. What is the secret?

I was hacked and had to change my yahoo passwrd. I cannot get my iPhone or iPad to accept my new password so I cannot receive messages on either. I had not problem changing my password on my apple computer. Please help! What is the secret?

Delete the account on your phone & iPad. Then set them up again.

HT1533 I have tried a hundred times pressing or holding the d key at power up and nothing happens ! What is the secret ?

I have tried a hundred times pressing or holding the d key at power up and nothing happens ! What is the secret ?

At the top of this page is a link to the startup key combinations.
Learn about Startup key combinations for Intel-based Macs

HT2731 What is the secret code being asked when buying an apps?

What is the secret code being asked when buying an apps?

Your CVV? The 3 digit number on back of your CC. 4 digits if using AmEx.

What's the secret handshake?, Mobile Forms, LC ES2

Similar Messages

Maybe you are looking for