What's the smallest sine wave output from PCI-5401(50&60Hz)

Want to know the minimal sine wave output from the PCI-5401. Primary use for tests with 50 & 60Hz, with different loads.

Hello,
Are you talking with respect to frequency? Using the DDS mode, the frequency resolution is 9.31mHz. You can find more in the appendix B of the manual. I am providing the link below. Please do let me know if you have any questions.
5401 Manual
Sincerely,
Sastry V
Applications Engineer
National Instruments

Similar Messages

  • Will the Ipad power adapter operate safely from the modified sine-wave output from a 12VDC-240VAC inverter?

    Will the power adapter for the Ipad Air operate safely on the modified sine-wave output from a 12 VDC-240VAC inverter?

    I am not sure why you want to do that...the power adapter takes 100-240 volts AC at 50-60 Hz and converts that to 5 to 5.1 volts DC at about 2 amps.  Why are you inverting 12 VDC to 240 VAC then back to 5 VDC?
    It should handle that easily, but seems like a long round about way of getting there.

  • What are the ways to download data from ods?

    Hi all,
    what are the ways to download data from ods?
      1. se11/se12
      2. listcube
      3. infospokes.
    Apart from the above 3 is there any other way to download data from my ods.
    I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
    Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
    thanxs
    haritha

    Hi Haritha,
    Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
    Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
    Now you should see and Excel Icon on top, click on it then select Table , then
    Microsoft Excel and it will open your data with all columns you want.
    I just tried for 213 columns
    Hope this helps.
    Thanks
    CK

  • What is the getcamera input format & output format?

    when we get video from webcam by getcamera(), what is the input format?
    output format should be the codec, like: VP6, H264, right?
    thx

    Hello,
    Please refer to this Help document on getCamera method:
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/Camera.html
    Regards,
    Suhas Yogin

  • What is the smallest Gcd value for Colors.

    Can anybody help me .
    Thanks,

    Hi
    From your title,
    >>what is the smallest Gcd value for Colors
    What do you mean about Gcd value?
    Do you have some code that you could show us to illustrate what you are trying to achieve? Or are you just
    talking in vague general terms about how you might go about writing some kind of code
    And the more details the better responses you will get. Thanks.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What is the best way to print from an iPad?

    I have the Printer Pro app, and it seems to do a good job locating my wireless printer, but it gets complicated to print webpages or pages documents. What is the best way to print from an iPad 2?

    If you have a compatible printer, use AirPrint http://www.apple.com/ipad/features/airprint.html and http://support.apple.com/kb/HT4356
    If not, you would need to purchase software, such as:
    http://itunes.apple.com/us/app/printcentral-for-ipad/id366020849?mt=8
    http://www.ecamm.com/mac/printopia/
    http://www.collobos.com/

  • What's the best way to output a high quality ready to send to the printer PDF?

    I'm designing a photo book for a friend and we're having output issues. We're working with a professional printer but for some reason our prints keep coming out soft or pixelated. The images are 300 dpi and formatted correctly for an InDesign document so the issue is likely output.
    What's the best way to output the HIGHEST quality PDF you can out of InDesign? Everyone seems to have different answers.
    Thanks in advance!

    Check a couple things.
    One would be for broken links. If there are broken links then ID will use the preview image instead of the linked image.
    Another would be to select an image that prints poorly in the Links Panel and check the effective resolution. If it is below your stated 300 dpi then the image has been enlarged greater than 100%.
    Then just use the PDF/X-4 profile for your PDF.
    Mike

  • What is the smallest data structure record in a .TXT file record to be recognized as an Apple Address Book "Data Card"?

    Hello! This is my first time in this discussion group. The question posed is the subject line itself:
    What is the smallest data structure record in a .TXT file record to be recognized as an Apple Address Book "Data Card"?
    I'm lazy! As a math instructor with 40+ students per class per semester (pCpS), I would rather not have to create 40 data cards pCpS by hand, only to expunge that info at semester's end. My college's IS department can easily supply me with First name, Last name, and eMail address info, along with a myriad of other fields. I can manipulate those data on my end to create the necessary .TXT file, but I don't know the essential structure of that file.
    Can you help me?
    Thank you in advance.
    Bill

    Hello Bill, & welcome aboard!
    No idea what  pCpS is, sorry.
    To import a text file into Address Book, it needs to be a comma delimited .csv file, like...
    Customer Name,Company,Address1,Address2,City,State,Zip
    Customer 1,Company 1,2233 W Seventh Street,Unit 543,Seattle,WA,99099
    Customer 2,Company 2,1 Park Avenue,,New York,NY,10001
    Customer 3,Company 3,65 Loma Linda Parkway,,San Jose,CA,94321
    Customer 4,Company 4,89988 E 23rd Street,B720,Oakland,CA,99899
    Customer 5,Company 5,432 1st Avenue,,Seattle,WA,99876
    Customer 6,Company 6,76765 NE 92nd Street,,Seattle,WA,98009
    Customer 7,Company 7,8976 Poplar Street,,Coupeville,WA,98976
    Customer 8,Company 8,7677 4th Ave North,,Seattle,WA ,89876
    Customer 9,Company 9,4556 Fauntleroy Avenue,,West Seattle,WA,98987
    Customer 10,Company 10,4 Bell Street,,Cincinnati,OH,89987
    Customer 11,Company 11,4001 Beacon Ave North,,Seattle,WA,90887
    Customer 12,Company 12,63 Dehli Street,,Noida,India,898877-8879
    Customer 13,Company 13,63 Dehli Street,,Noida,India,898877-8879
    Customer 14,Company 14,63 Dehli Street,,Noida,India,898877-8879
    Customer 15,Company 15,4847 Spirit Lake Drive,,Bellevue,WA,98006
    Customer 16,Company 16,444 Clark Avenue,,West Seattle,WA,88989
    Customer 17,Company 17,6601 E Stallion,,Scottsdale,AZ,85254
    Customer 18,Company 18,801 N 34th Street,,Seattle,WA,98103
    Customer 19,Company 19,15925 SE 92nd,,Newcastle,WA,99898
    Customer 20,Company 20,3335 NW 220th,2nd Floor,Edmonds,WA,99890
    Customer 21,Company 21,444 E Greenway,,Scottsdale,AZ,85654
    Customer 22,Company 22,4 Railroad Drive,,Moclips,WA,98988
    Customer 23,Company 23,89887 E 64th,,Scottsdale,AZ,87877
    Customer 24,Company 24,15620 SE 43rd Street,,Bellevue,WA,98006
    Customer 25,Company 25,123 Smalltown,,Redmond,WA,98998
    Try Address Book Importer...
    http://www.sillybit.com/abee/

  • What is the easiest way to upgrade from OS X 10.4.11 to 10.5 Leopard

    what is the easiest way to upgrade from OS X 10.4.11 to 10.5 Leopard

    You should consider this:
    Here are the minimum specs your Mac will need to run Leopard, according to Apple:
    Intel, G5, or 867MHz+ G4 processor
    512 megs of RAM MINIMUM (though if you only have 512 megs of RAM you may actually find you need more.)
    DVD drive (Leopard is shipping on a DVD, and your Mac needs to read it to be able to install it)
    9GB of free disk space
    Hope this helps

  • What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.

    What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.
    This has worked fine with MobileMe with only a couple of minor glitches in the past.
    Any experience doing this the "right" way?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • What's the point of buying apps from the BBWorld?

    What's the point of purchasing apps from the BlackBerry world for playbook if I don't even know if they will work after the BB10 update?

    thestepiens wrote:
    Mama told me 'son, do NOT Gamble' - I will not with my own money. I would advice everyone else the same.
    ...but you bought a tablet. Not exactly a dead cert. 

  • Invoice list: What is the standard setting for output type LR00 ?

    Hello all,
    They have messed up our system. What are the standard settings for output type LR00 ?
    Program RVADIL01,
    Form ??
    Thanks
    Rad

    Dear Rad,
    > Program RVADIL01,
    > Form - SD_INVOICE_LIST
    Thanks,
    Raja

  • What is the best solution for migrating from Maverick to Yosemite?

    What is the best solution for migrating from Maverick to Yosemite? Anyone have suggestions?

    Back up all data. Update all third-party software to the latest version and remove any you don't need. Download the Yosemite installer from the App Store. Run it.

  • Why can't I open and answer an instant imessage notification using just one key(such as enter key)? If I shouldn't, what's the use of answering right from notification?

    Why can't I open and answer an instant imessage notification using just one key(such as enter key)? If I shouldn't, what's the use of answering right from notification? I can instead, move my mouse to the app, right?

    Hi,
    The Alert option in Notifications gives the Reply option
    9:33 pm      Monday; December 8, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • What is the impact if we switch from standard costing to actual costing?

    Hi all,
    what is the impact if we switch from standard costing to actual costing?
    what are the changes is needed in costing?
    thanks.

    Hello,
    Its an nice idea to switch from standard to actual costing. It would be advisable to make this switch over happen in a new period praferably with a new year. You would need to carry out the settings for material ledger / actual costing and for the accounting settings you may refer to sap note 908737.
    Not much costing changes would be necessary to the existing configuration but you would need to activate material ledger and allign your Inventory accordingly. The settings for ML would be relatively simple but the main problem would be handling the inventory that you already have in stock. You would also need to have a proper closing procedure followed by next month's planning approach which would actualise the inventory at the end of the month and decide the methodology for next month's plan valuation. It  should be kept in mind for configuring ML.
    The closing sequence would be as under:
    1. Complete all Cost Center and production order postings.
    2. Complete all Cost center Assessment / Distribution
    3. Calculate Actual rate
    4. Revaluate production orders
    5. Calculate WIP
    6. Settle Production Order
    7. Run Costing Run (CKMLCP)
    Material ledger is capable of actualising activity costs and WIP as well and you should configure it according to your need.
    You can follow the standard SAP documentations for configurations + Note 908737 for configuring ML.
    Kind Regards // Shaubhik

Maybe you are looking for