What's the URL of a folder?

Hi folks;
How can our customer access a folder?
Something like this?
/pls/portal30/URL/folder/foldername
But it doesn't work - what's wrong / any ideas?
Thank you / regards,
Bernhard

Fixed it.

Similar Messages

  • What is The URL for OmniPortlet Provider?

    We installed PDK. What is the URL for OMNIPortlet provider when registering the provider?

    Hi,
    A couple of additional points;
    You may also use the following URL;
    http://<MACHINE_NAME>:<OC4J_PORT>/portalTools/
    This will get you to the Provider test page of Portaltools application, and from this page you have links to all the providers of Portaltools.
    Also, you may refer to the Configuration document for Omniportlet, this is available with PDK installation, you can access this document at;
    \<pdk_install_directory>\portalTools\doc\install\configuring.omniportlet.html
    Alternatively you can access this document with the following URL;
    http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PORTALTOOLS/DOC/INSTALL/CONFIGURING.OMNIPORTLET.HTML
    Take care,
    Manoj

  • What is the URL that Adobe Acrobat needs to contact for Activation after you enter the serial number

    What is the URL that Adobe Acrobat needs to contact for Activation after you enter the serial number? We need to allow internet access to our users for it.

    there are quite a few but they all are on the adobe.com domain.

  • What is the url of the WSDL generated by XI?

    Hi all,
    I have generated a WSDL file for a message interface.
    I will like to see this WSDL in the wsnavigator.
    The wsnavigator requires me to input a wsdl url.
    What is the URL of this WSDL which I've just generated?
    Please advise.
    Thanks.
    Ron

    Hi,
    Did you use the Integration Directory to create our WSDL? If yes, then you will have the WSDL stored up on your Local desktop itself.
    For See the WSDL's in your wsnavigator, you wil have to deploy your Webervice on your XI server and then you can see the WSDL there.
    In your case as you are trying to expose an Outbound Interace in XI as a webservice all you need to do would be to create the WSDL as shown in section 3.2.2 of this doc,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
    Regards
    Bhavesh

  • What FTP servers can I use and what is the URL of it. Help me! Due on Wed.

    I want to up load my website but I do not know what FTP server to use. I find a FTP server but not know what's the URL.

    You need a webhosting package. With or without a domainname.
    So you have to find one first.
    To find webhosting type the word in the search field of your browser.
    If you have internet access you can check with your ISP too.
    And with a domainname it's very easy to determine the URL : http://www.yourdomainname.com

  • What's the URL in a JDBC-ODBC bridge driver connection?

    I'm trying to use a JDBC-ODBC bridge driver but I don't know what is the URL I need to put inside a the "getConnection (String URL, String userid, String passwd)" method.
    Connection conn = DriverManager.getConnection(URL, user, passwd);
    Can anybody help me?

    Yes Marc,
    but maybe Edgar should know that he first has to add a ODBC datasource.
    in WINNT
    Goto System ODBC Datasources and try to connect to your DB.
    If the test is working than you can use the name you have chosen
    as URL
    good luck
    Stefan

  • What is the url for executing PL/SQL

    what is the URL for 9i http pl/sql routines?
    http://machine:port/?????????
    thnx
    endre

    Hi endre,
    Are you looking for the URL for executing Oracle9i PSP routines?
    -shefali

  • What is the url when you forget your password?

    What is the url that needs to be entered when you forget your password to retrieve it?

    Can I just point out the obvious? (Well, it is to me at any rate!)
    If there was a URL that "needs to be entered" (I assume you mean a URL to be visited), in order to retrieve your password when you forget it, wouldn't that enable those people you know and wish to prevent getting in to your iPod (which - presumably, is why you put the password on it) to go to that same URL, get your password and use it to get into your Touch?
    Or is it me?

  • What is the URL for the keynote help link in the keynote app

    what is the URL for the keynote help link in the keynote app on the ipad. I have a firewall in place to keep student from accessesing unwanted/restricted information, where can I find the url/ip address to unblock this site. Thanks

    Hi Ravi,
    As such there is no path for directly opening Visual Composer from the Netweaver system (I suppose this is what you mean by the acronym nws). Visual Composer can only be opened by the URL as given by Rahul:
    http://<hostname>:<port>/VC
    Bye
    Ankur

  • What are the URLs for webmail and the wiki?

    I see that Lion Server supports webmail and a built-in wiki server, both available through a web browser.
    What are the URLs for these; how do I get to them? I can't find that important detail anywhere in the documentation.

    From /etc/httpd.conf
    Alias -->name --> location
    Alias /webmail /usr/share/web/webmail.html
    Alias /changepassword /usr/share/web/changepassword.html
    Alias /profilemanager /usr/share/web/profilemanager.html
    Alias /webcal /usr/share/web/webcal.html

  • Hi There, What is the Location for resource folder in apps dir.

    Hi There,
    What is the Location for resource folder in apps dir Structure.
    Bachan

    Are you trying to open the form locally or remotely?
    If locally then do the following:
    - From 'regedit' navigate to HKEY_LOCAL_MACHINE\Software\Oracle
    - Search for FORMS60_PATH
    - Make sure that "D:\oracle\visappl\au\11.5.0\resource" exist in FORMS60_PATH
    If remotely the do the following:
    - Copy "D:\oracle\visappl\au\11.5.0\resource" to your local machine (for example D:\resource)
    - From 'regedit' navigate to HKEY_LOCAL_MACHINE\Software\Oracle
    - Search for FORMS60_PATH
    - Make sure that "D:\resource" exist in FORMS60_PATH
    Close/Open the from builder, you should be able to open the form then.

  • What is the url for 'Design Time for Guided Procedure'

    Hi,
    I'm new to Netweaver CE. My question is, how do I login to GP Design Time? What is the url? I have installed Netweaver CE 7.1 in my system. What else is required?
    Thanks & Regards,
    Lohit

    Hi,
    This is the URL to directly access Design Time
    http://<host>:<port>/webdynpro/dispatcher/sap.com/cafgpuidttemplates/ADesignTime
    If you have the proper Roles, you can see the Tabs in the portal for Design time & runtime.
    Go through this blog for  Roles.
    /people/ashutosh.rastogi/blog/2006/11/25/setting-up-roles-for-caf-gp-and-visual-composer
    Thanks
    sreeni

  • What is the URL for administration of a standalone Oracle 11g HTTP server (OHS + Web Cache)

    Hi,
    I have a running Oracle 11g HTTP server (OHS + Web Cache). A stand-alone installation.
    What is the URL to access the administration page of the OHS server?
    Thanks by advance.

    Try this:
    http://hostname:7777/demos.htm

  • What is the url for executing PL/SQL via 9i http

    what is the URL for 9i http server pl/sql routines that I just compiled? I don't run 9ias just the 9i http server
    http://machine:port/?????????/procedure_name
    thnx
    endre

    do this if you are still having problemd
    CREATE AND SETUP NEW USER
    The second step is to create an application user that will
    own the code for this example. Connect to SQL*PLUS as a user with
    DBA rights, and execute the following commands:connect
    SQL> CREATE USER user IDENTIFIED by user;
    SQL> GRANT CONNECT, RESOURCE TO user;
    CONFIGURE DAD IN THE PL/SQL GATEWAY
    The third step is to create a new DAD.
    Enter the PL/SQL gateway configuration menu. The generic address to the
    page is
    http://<machin:port/pls/admin_/gateway.htm
    The is specified in your plsql.conf file. By default the address
    will be
    http://..:/pls/admin_/gateway.htm
    (Replace ..: with the valid entry for your
    configuration, e.g. www.acme.com:8080).
    Click on the link 'Gateway Database Access Descriptor Settings' to access
    your DAD settings. Then press the link 'Add for WebDB 2.x configuration'
    to create a new DAD. Enter the following values:
    Parameter Value
    Database Access Descriptor Name give name
    Schema Name the user you created
    Oracle User Name the user you created
    Oracle Password the password of the user
    Oracle Connect String <- found in your
    tnsnames.ora
    Document Table                    documents
    Document Access Procedure user.package.procedure
    Extensions to be uploaded as LONG RAW
    Leave the other parameters as they are. If you are not using an 8i database
    or need to use the LONG RAW datatype for
    some reason, you can place an '*' in the "Extensions to be uploaded as LONG
    RAW" field. You can also limit this to
    specific file name extensions such as jpg or pdf by entering the extensions
    and using a comma to separate the
    values. Click the OK button to save the DAD configuration.
    Hope this helps

  • What is the URL for the itunes u course manager?

    what is the URL for the itunes u course manager?  the one on the Apple site returns a page not found

    https://itunesu.itunes.apple.com/coursemanager/

Maybe you are looking for

  • Creation of delivery when sales order is saved through VA01

    Hi All We got the requirement in such a way that we are creating sales order of type (ZOR -standard order ) . Configrration is donde in such a way that when the order is saved one dilvery will be created for that order of deilvery type ZLF .as this i

  • ACS 5.3.0.40 On-demand Full Backup failed.

    Hi, I have ACS 5.3.0.40 Primary Secondary Authenticators , of which the Scheduled backup has stopped. When checked the : Monitoring Configuration > System Operations > Data Management > Removal and Backup > Incremental Backup , it had changed to OFF

  • How to create a variant in VA01

    Hi Gurus, Can you teach me how to create a variant in VA01?  I'd like to have a default value in the sold to party field. Thanks, Paul

  • Search and replace, with pattern matching using a table

    I need to inspect a data stream and standardise a set of codes. I need to 1. Match any patterns with a dash character and remove the dash and any following characters, eg BN-S -> BN, BN-SH -> BN, ARG-22 -> ARG, etc. 2. Make a few specific word for wo

  • Data Extraction (Line Item Level) FI/CO

    Hi expert, Exp:the datasource 0FI_GL_4 is Data Extraction (Line Item Level) FI/CO. From sap help doc i kown that delta records are directly transferred to BW. No record is written to the BW delta queue. But i run rsa7 in ecc, the delta queue list had