What's the usage of Digital Output.vi (kei224v6.llb)
I would be gratefull if you could inform me for the usage of Digital Output.vi in kei224v6.llb.
I'm using Keithley 224 Programmable Curent Source.
Thanks
Hi thanserwood,
the Model 2243 is an optional IEEE-488 interface for the Model 224 Programmable
Current Source. This interface adds extra versatility to the Model 224 by allowing the transmission of data and commands
over IEEE-488 bus. The interface provides all the logic necessary to interface the Model 224 to the bus using standard
IEEE-488-1978 protocol. Additionally, the Model 2243 incorporates a separate digital I/O port that may be used to
interface the Model 224 to other digital instrumentation.
The digital I/O port consists of four input and four output lines as
well as IEEE-488 common and +5VDC. The outputs will drive one TTL load.
The instrument can be programmed to generate an SRQ upon any change in
the four bit input data.
In the manual you will find further information.
Regards
Indiana
Similar Messages
-
What is the usage of START_FORM and OPEN_FORM
Hi,
In sap script,exactly what is the usage of START_FORM,OPEN_FORM,CLOSE_FORM and END_FORM.Could you please help out.
Thanks,
MadhuHai Madhu
For START_FORM
SAPscript: Start a form
The layout set can be changed in the current print procedure with START_FORM. It is therefore possible to combine several different layout sets in one printer output. Before a new layout set is opened with START_FORM, an open layout set must be closed with END_FORM.
Parameters
ARCHIVE_INDEX
FORM
LANGUAGE
STARTPAGE
PROGRAM
MAIL_APPL_OBJECT
LANGUAGE
Exceptions
FORM
FORMAT
UNENDED
UNOPENED
UNUSED
SPOOL_ERROR
CODEPAGE
For OPEN_FORM
SAPscript: Open form printing
The module OPEN_FORM opens layout set printing. This function must be called up before you can work with other layout set functions (WRITE_FORM, ...).
It is not obligatory to enter a layout set name to open it. If a layout set is not specified, one must be opened with START_FORM.
For information on DEVICE MAIL see function module SO_NEW_DOCUMENT_SEND_API1
Parameters
APPLICATION
ARCHIVE_INDEX
ARCHIVE_PARAMS
DEVICE
DIALOG
FORM
LANGUAGE
OPTIONS
MAIL_SENDER
MAIL_RECIPIENT
MAIL_APPL_OBJECT
RAW_DATA_INTERFACE
SPONUMIV
LANGUAGE
NEW_ARCHIVE_PARAMS
RESULT
Exceptions
CANCELED
DEVICE
FORM
OPTIONS
UNCLOSED
MAIL_OPTIONS
ARCHIVE_ERROR
INVALID_FAX_NUMBER
MORE_PARAMS_NEEDED_IN_BATCH
SPOOL_ERROR
CODEPAGE
For CLOSE_FORM
SAPscript: End layout set printing
Form printing started with OPEN_FORM is completed. Possible closing operations on the form last opened are carried out.
Form printing must be completed by this function module. If this is not carried out, nothing is printed or displayed on the screen.
Parameters
RESULT
RDI_RESULT
OTFDATA
Exceptions
UNOPENED
BAD_PAGEFORMAT_FOR_PRINT
SEND_ERROR
SPOOL_ERROR
CODEPAGE
For END_FORM
SAPscript: Terminate a form
Closes the current layout set. Final operations required on this layout set are carried out.
CAUTION: END_FORM is not a replacement for CLOSE_FORM.
Parameters
RESULT
Exceptions
UNOPENED
BAD_PAGEFORMAT_FOR_PRINT
SPOOL_ERROR
CODEPAGE
Thanks & regards
Sreenivasulu P -
What does the usage of CURSOR word mean in an SQL statement?
Hey folks,
Please check out the following query and do please explain me what does the usage of CURSOR keyword in an SQL statement mean.
select deptno,cursor(select ename from emp a where a.deptno=b.deptno) from dept b;
well, the output was like this,
DEPTNO CURSOR(SELECTENAMEFR
10 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
CLARK
KING
20 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
SMITH
JONES
SCOTT
ADAMS
FORD
30 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
ALLEN
WARD
MARTIN
BLAKE
TURNER
JAMES
6 rows selected.
40 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
no rows selected
Your favour'll be deeply appreciated.
Cheers,
PCZThis returns a non-square result set. Each row of the result is a deptno and then a result set of the enames in that deptno.
This can be useful when you need to send a lot of data to a client application in a single query that would otherwise contain a lot of redundancy. It tends to be a relatively unusual construct (I've only found one situation where it was appropriate in my career) and requires some relatively sophisticated understanding on both the database and client sides.
Justin -
What's the Bennefit of Digital Rights Management? re: Audigy2 Upd
Regarding the newly posted Audigy2 update, if you already have the previous 3 updates loaded, what is the bennefit of Digital Rights Management?
Edit, found this.
"SPDIF output is not available during playback of protected <B>digital</B> audio contents authored with Microsoft DRM (<B>Digital</B> <B>Rights</B> <B>Management</B>) technology. "
Message Edited by johnston2 on <SPAN class=date_text>-27-2004<SPAN class=time_text>08:36 PM
Message Edited by johnston2 on -27-2004 08:37 PMHi. Thanks.
I loan out CD's and records to friend but to my knowledge they just use it to listen to, they then do the same for me.
So if I get this correctly, downloading music from iTunes is like downloading Apps in that it does not matter which device I load it onto? Or is there a hiccup here in terms of having a laptop, desktop and iPhone? For instance my iPhone is synced up to my laptop (it used to be synced to the desktop) and I had/have to be very careful about making sure I transferred my Apps over to the laptop - using the iPhone I think - when I started syncing the device with the laptop. There was some risk of losing all the Apps if I did this correctly, no?
Is it the same with music downloads? should I only download from my iPhone/laptop combo or an iPhone/desktop combo? I mean, I actually find it /more/ convenient to do things on the desktop machine but this makes it hard to sync with the laptop if I am traveling so I now only download APPS to the laptop machine.
Does this question make sense? Do I need to use one computer or another for this?
Also, in terms of my other burned CD Roms (that are now digital), I assume these are non DRM and I can move them laptop to desktop to iPhone and back with no issues whatsoever?
I mean is there a difference in this respect between iTunes downloaded songs and ripped songs from my collection?
Thanks. -
What is the usage of for all entries ?
What is the Usage of read table after using for all entries ?
In the following example what exactly it is doing ?
Usage of 'for all entries' in Select Statement
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
DATA: BEGIN OF T_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN,
MATNR LIKE VBAP-MATNR,
POSNR LIKE VBAP-POSNR,
END OF T_VBAP.
DATA: BEGIN OF T_VBFA OCCURS 0,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
VBTYP_N LIKE VBFA-VBTYP_N,
END OF T_VBFA.
DATA: BEGIN OF T_VBAK OCCURS 0,
VBELN LIKE VBAK-VBELN,
IHREZ LIKE VBAK-IHREZ,
END OF T_VBAK.
DATA: BEGIN OF T_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
END OF T_KNA1.
DATA: BEGIN OF T_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
END OF T_MAKT.
SELECT likpvbeln likplifex likpbldat likpwadat likpwadat_ist likpkodat likp~lfart
likpkunnr likpvstel lipsposnv lipslfimg lipsvrkme lipslgmng lips~meins
lipswerks lipslgort lipscharg lipsvbelv lipsposnr lipsmatnr
lipsvbeln LIPSVGBEL LIPSVGPOS vbupkosta vbupwbsta vbupposnr vbup~vbeln
VBAKIHREZ VBAKVBELN VBAP~VBELN
INTO CORRESPONDING FIELDS OF TABLE it_itab
FROM ( likp
INNER JOIN lips
ON lipsvbeln = likpvbeln
INNER JOIN vbup
ON vbupposnr = lipsposnr
and VBUPVBELN = LIPSVBELN )
left outer join VBAK
on VBAKVBELN = LIPSVGBEL
inner join VBAP
on VBAPVBELN = VBAKVBELN )
WHERE likp~vbeln IN so_vbeln
AND likp~lifex IN so_lifex
AND likp~lfart IN so_lfart
AND likp~kunnr IN so_kunnr
AND likp~vstel IN so_vstel
AND likp~bldat IN so_bldat
AND likp~wadat_ist IN so_wadat
AND vbup~kosta IN so_kosta
AND vbup~wbsta IN so_wbsta
AND LIPS~LFIMG NE 0.
SELECT VBELN IHREZ INTO TABLE T_VBAK
FROM VBAK
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELN = IT_ITAB-VGBEL.
APPEND T_VBAK.
ENDSELECT.
SELECT VBELN MATNR POSNR INTO TABLE T_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELN = IT_ITAB-VGBEL AND
MATNR = IT_ITAB-MATNR AND
POSNR = IT_ITAB-VGPOS.
APPEND T_VBAP.
ENDSELECT.
SELECT VBELV VBELN VBTYP_N INTO TABLE T_VBFA
FROM VBFA
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELV = IT_ITAB-VBELN AND
VBTYP_N = 'M' .
SELECT KUNNR NAME1 INTO TABLE T_KNA1
FROM KNA1
FOR ALL ENTRIES IN IT_ITAB
WHERE KUNNR = IT_ITAB-KUNNR.
APPEND T_KNA1.
ENDSELECT.
SELECT MATNR MAKTX INTO TABLE T_MAKT
FROM MAKT
FOR ALL ENTRIES IN IT_ITAB
WHERE MATNR = IT_ITAB-MATNR.
APPEND T_MAKT.
ENDSELECT.
*Populate field with color attributes
LOOP AT it_itab INTO wa_ITAB.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
REFRESH color.
colourize 'VBELN' 0. " .
WA_ITAB-farbe = color[].
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
IF ld_color = 3. "8
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ITAB-line_color.
WA_ITAB-NAME1 = ''.
WA_ITAB-MAKTX = ''.
WA_ITAB-IHREZ = ''.
WA_ITAB-VBELV = ''.
READ TABLE T_KNA1 WITH KEY KUNNR = WA_ITAB-KUNNR.
IF SY-SUBRC = 0.
WA_ITAB-NAME1 = T_KNA1-NAME1.
ENDIF.
READ TABLE T_MAKT WITH KEY MATNR = WA_ITAB-MATNR.
IF SY-SUBRC = 0.
WA_ITAB-MAKTX = T_MAKT-MAKTX.
ENDIF.
READ TABLE T_VBAK WITH KEY VBELN = WA_ITAB-VGBEL.
IF SY-SUBRC = 0.
WA_ITAB-IHREZ = T_VBAK-IHREZ.
ENDIF.
READ TABLE T_VBFA WITH KEY VBELV = WA_ITAB-VBELN.
IF SY-SUBRC = 0.
WA_ITAB-VBELVA = T_VBFA-VBELN.
ENDIF.
READ TABLE T_VBAP WITH KEY VBELN = WA_ITAB-VGBEL
POSNR = WA_ITAB-VGPOS
MATNR = WA_ITAB-MATNR.
IF SY-SUBRC = 0.
WA_ITAB-IHREZ = T_VBAK-IHREZ.
ENDIF.
wa_ekko-line_color = 'C410'.
MODIFY it_itab FROM wa_itab.
ENDLOOP.
ENDFORM. " data_retrievalhi Jyotirmoy,
The explanation below can give u an idea of wat is going in ur code..
Use of FOR ALL Entries
Outer join can be created using this addition to the where clause in a select statement. It speeds up the performance tremendously, but the cons of using this variation are listed below
Duplicates are automatically removed from the resulting data set. Hence care should be taken that the unique key of the detail line items should be given in the select statement.
If the table on which the For All Entries IN clause is based is empty, all rows are selected into the destination table. Hence it is advisable to check before-hand that the first table is not empty.
If the table on which the For All Entries IN clause is based is very large, the performance will go down instead of improving. Hence attempt should be made to keep the table size to a moderate level.
Not Recommended
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
Recommended
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.
Thankyou,
Regards. -
What's the best way to output a high quality ready to send to the printer PDF?
I'm designing a photo book for a friend and we're having output issues. We're working with a professional printer but for some reason our prints keep coming out soft or pixelated. The images are 300 dpi and formatted correctly for an InDesign document so the issue is likely output.
What's the best way to output the HIGHEST quality PDF you can out of InDesign? Everyone seems to have different answers.
Thanks in advance!Check a couple things.
One would be for broken links. If there are broken links then ID will use the preview image instead of the linked image.
Another would be to select an image that prints poorly in the Links Panel and check the effective resolution. If it is below your stated 300 dpi then the image has been enlarged greater than 100%.
Then just use the PDF/X-4 profile for your PDF.
Mike -
Invoice list: What is the standard setting for output type LR00 ?
Hello all,
They have messed up our system. What are the standard settings for output type LR00 ?
Program RVADIL01,
Form ??
Thanks
RadDear Rad,
> Program RVADIL01,
> Form - SD_INVOICE_LIST
Thanks,
Raja -
What is the usage of Request Variable ? and how we can use it ?
Hi All,
What is the usage of Request Variable ? and how we can use it ?
Thanks in advanceHi,
A Request variable is the same as a Session variable:
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
Cheers,
Daan Bakboord
Scamander Solutions -
OS:RH71
ORACLE RELEASE 8.1.7
what's the usage of function dbms_standard.client_ip_address of
sys? THX.Johnny.Danger wrote:
We have a somewhat mini scale network. We have anywhere from 40 to 60 ranging from WLan and Lan devices. Right now we have been using opendns for content filtering but we would like to limit certain sites to just certain groups and if someone goes onto a site they shouldn't then what we would like to know is the IP of the user and there mac address If we could somehow find a captive portal software or hardware that would be perfect because it takes a lot of guess work out of things. We use Apple Wireless router's and run 2 server's one running Mac OSX Server 10.6.7 and a 2nd server running the same which act's as our OD replica
So my question is what do you guys use?
Were looking for the more user friendly the better and by that i mean I don't want to be using ww-rt on some router or something
Thank you for your time.
Have a look at Vicomsoft and their Intergate Inspect package. This runs on a Mac server and lets you link to Open Directory for authenticating users and lets you set filtering for users or for groups of users. Sounds exactly what you want.
See http://www.vicomsoft.com/products/filter/index.html -
Can I begin prepaid service with a $100.00 card good for one year and if so what are the usage terms?
Yes; phone is for Verizon PREPAID plans. Sri I did not state that correctly. I see that there are prepaid plans with monthly usage etc. I see some offers on line for a $100.00 card that's good for one year. Trying to determine if that is available from a Verizon store to begin a new plan. Checked with two different Verizon stores and got two opposite answers and neither was sure of the terms. Simply trying to get a low cost backup. Thank you for responding.
-
What is the usage of flag "closed" in the 'Quantities/Dates' of item in PR?
What is the usage of the flag "closed" in the 'Quantities/Dates' view of a item in PR?the help document said:'Closed: Purchase Requisition Closed
Flags a purchase requisition as closed, that means that no further purchase orders are to be created for this purchase requisition...",But I flagged this indicator,
entered the tcode:me21n,I can create a po reference this PR successfully.Why?
Please tell me what is the true usage of this flag.Thank you !
My msn:[email protected]Hi YuLin,
SAP Documentation does'nt say that no further PO's can be created after you flag the PR as closed. Please see the following documentation:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Give attention to the note which says:
"You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned"
Hope this clarifies,
Naveen -
What's the usage of jusched.exe?
What's the usage of jusched.exe, which is automatic started after the J2SE 1.4.2_02 installed under Microsoft Windows Platform?
Anyone help me to know it is appreciated.Process File: jusched or jusched.exe
Process Name: Sun Java Update Scheduler
Description: Application that is an update scheduler. The application checks the Sun site to see if newer Java versions are available.
I hope this helps.
Thanks,
Rashmi. -
What is the use of Digital Signature in export release build for AIR applications
hi Freinds..
what is the use of digital signature identity when we release build?Well obviously it is an Ant build.
It looks to just compile/build a web application into a war so you can deploy it where you want to.
You don't need to edit it every time you are making a new page. It should work for any generic struts web application laid out in the fashion it expects.
Cheers,
evnafets -
What is the getcamera input format & output format?
when we get video from webcam by getcamera(), what is the input format?
output format should be the codec, like: VP6, H264, right?
thxHello,
Please refer to this Help document on getCamera method:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/Camera.html
Regards,
Suhas Yogin -
Audigy 2 value where is the option for digital output? Help
i have the creative inspire 5700 and the audigy 2 value but i cant find the checkbox for "digital output only"
where can i find it's Pls help me !!!That is not the problem however it is located in the speaker setup window and all it does is disable the line outs, digital is always turned on and cannot be turned off. I suggest you re-read the 5700 manual. Tell me which lights you have on.
Maybe you are looking for
-
A730 keyboard and mouse compatibility with other machines
I would like to have a USB keyboard mouse with the machine. Unfortunately there is not an option for that with this machine. I would like to sell the k/m that comes with the machine. What machines including ones not made my Lenovo would the k/m be
-
Time Series in Discoverer.
Hi, wondering if anybody knows how I can use time series functionality in Discoverer3.1 and 3i?
-
Page Authorization Scheme OK button not working
Hi All, I have a Page Level Authorization scheme, which makes a PL/SQL Function call to determine whether the logged in user should have access to the Page. This works well and displays an 'Access denied by Page security check' error message, but the
-
Hello I own a g580 and i upgraded my bios to 97 version for win8 but because of that my gpu performance is now low and my fan and the synaptics device is also not working properly. I downloaded the bios utility for the verion 40 and have extracted it
-
I can not install adobe flash player saying that I have to quit safari, but nothing has opened.