What's up with the Server Admin Tools update 10.3.5?

I keep getting the Apple update window with Server Admin Tools Update 10.3.5 checked off in its checkbox.
When I run the installation, it goes throught the status bar, etc, and then comes back up as needing installation.
The tools I run show 10.3 (v106) in the about window.
What's up?
thanx

Cliff, I am not sure why you are getting this update, but if you are not using Apples' Server and you are not that Servers System Administrator, Uncheck it and ignore it, you do not need it.
If by chance somewhere along the line you downloaded software that was not through the Software Update feature on your computer, you might have mistakenly downloaded some software you did not need.
Don

Similar Messages

What's wrong with the server?

execute me ~what's wrong with the server? I can‘t use the command nohup any longer.Can somebody help me?
root@shhis1new # nohup
Segmentation Fault (core dumped)
root@shhis1new # nohup ls
Segmentation Fault (core dumped)
root@shhis1new # nohup /opt/SUNWexplo/bin/explorer -w all &
[1] 6871
root@shhis1new #
[1]+ Segmentation Fault (core dumped) nohup /opt/SUNWexplo/bin/explorer -w all
root@shhis1new # uname -a
SunOS shhis1new 5.9 Generic_122300-19 sun4u sparc SUNW,Netra-T12
System Configuration: Sun Microsystems sun4u Sun Fire E2900
System clock frequency: 150 MHZ
Memory size: 49152 Megabytes
Best Regards
<email address removed by moderator>
Edited by: 884082 on 2011-11-22 下午10:00

Moderator Action:
You email address has been removed from your post.
You wouldn't want bad people to send you spam messages for the rest of your life, eh?
Moderator Advice:
If this is the same E2900 that you have mentioned in every one of your other forum posts, then it would seem you need to contact Technical Support and open a proper support request. These forums are NOT techsupport and that system seems so poorly configured that it needs deep analysis. Such investigation cannot be done by using an online forum.
The immediate solution is to log on to the SC of that box and power it down, then boot it back up. At least it will be running after that.

What have happend with the new 22.0 update? Why is it so bad? The size of everything is enlarge and every picture i upload on the web is blurred. Fix it!

Fix the problem and stop with the zoom in of every webpage. Its an awful thing for every photografer.

''This change in Firefox version 22 is a really bad idea. Many people will not tolerate going to about:config to fix this. And they shouldn't have to.''
Agreed, put feedback at input.mozilla.org/feedback

Lion server VPN + Server Admin Tools 10.7

Hi,
I followed this guide http://macminicolo.net/lionservervpn to try to set up VPN on my lion mac mini server.
I also used Server Admin Tools 10.7 as instructed in the guide.
After completing the steps in the guide, I cannot get VPN to work, plus I have extra problems as below:
my mini cannot connected to the Internet or local network shares. I found under "Network" setting there was extra VLan created by the system automatically showing as "System Test--Connection error". After I delete this extra connection and revert my Ethernet to its original settings I can connect to the Internet again.
Server Admin Tools 10.7 seem to retains all its settings from the guide on NAT, Firewall etc. doesn't matter if I had removed the current server and created a new server in the left pane. Is there anyway I can restore the Server Admin Tools to its programme defaults? I suspect these settings are affecting my networks and I cannot get rid of them completely.
Would VPN still work if I just set it up in the server app? I haven't been able to get it work this way. I also want to find out is your guide for using the VPN to connect to the Internet off the server as a way to bypass restrictions? Do I have to set it up this way as the guide if I just to want to set up a VPN for simple fireshareing?
What did this command in the guide do to my mini? I was hopping if I cannot get VPN to work, then I should at least reverse the effects of this command. How do I undo this command please? "sudo serveradmin settings vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.2.1"

Thanks BrianFL. This helps hugely. Yes, I just to set up a simple filesharing VPN not the kind of VPN that bypass Internet censorship. I use ethernet connection directly from my router yes.
1. I just need to use the server app to set up a VPN and port forwarding. That is it?
2. The setting I have made according to the guide with Server Admin Tools seems never going away, even after I deleted the server that has all the settings inside Server Admin Tools. Upon creating a new server inside Server Admin Tools, the new server inherits all the settings from the one I just deleted. Any idea how I can restore to Server Admin Tools's defaults settings?
3. Even VNC (I use RealVNC) on the mini stopped working after I made changes according to the guide and deleted all the changes I can find. What is the address format for lion's build in VNC (192.168.0.100:5800?) like? I forgot how it is.
Thanks so much!

Server admin tool's help file broken ?

Hi,
SL Server 10.6.4
I'm trying to open the help file of the server admin tool but it seems to be broken : 100% CPU, beachball. The same occurs with the file included in the standalone bundle (see http://support.apple.com/downloads/ServerAdmin_Tools_106) installed on a SL 10.6.4 client.
Anybody having the problem too ? Any idea ?
Thanks

Hi,
SL Server 10.6.4
I'm trying to open the help file of the server admin tool but it seems to be broken : 100% CPU, beachball. The same occurs with the file included in the standalone bundle (see http://support.apple.com/downloads/ServerAdmin_Tools_106) installed on a SL 10.6.4 client.
Anybody having the problem too ? Any idea ?
Thanks

HT1822 Mac OS X server admin tools: non-server editions of Mac OS 10.6?

On my iMac, I am running the installation of OS X that it shipped with + updates up to 10.6.8. I know there are server admin tools available on the Apple support website, that do stuff like manage groups. I am looking for a GUI to look at ALL the users, groups, permissions, etc. (including hidden ones like _www for apache) on my system, without having to dig through config files in /etc and/or use the dscl command line utility.
The referenced article says I can find the 10.6 tools on Apple support downloads:
Mac OS X Server v10.6
To administer Mac OS X Server v10.6, use the Server Admin Tools 10.6 on Mac OS X v10.6. You should match the version numbers of the server, tools, and admin workstation as closely as possible; for example, use Server Admin Tools version 10.6.8 on Mac OS X v10.6.8 to administer Mac OS X Server v10.6.8.
My questions are:
1. Where are the 10.6 tools on the apple support website? A search turns up versions for everything BUT 10.6.
2. Will the 10.6 tools work on 10.6.8 that is not a server edition of Mac OS?

The Server Tools you can download from Apple will install and run on OS X client, but they will only connect to and monitor OS X Server boxes.
So that won't get you where you want.
One command that will help you here - and which is present on OS X Server and OS X client - is dscl.
dscl . list /users
For details:
info dscl
or
man dscl
Or a web search, etc...

Server Admin Tools 10.4.7 Won't Install on Leopard Client

When you attempt to install Server Admin Tools 10.4.7 on a Leopard client, when you get to the point about Selecting a Destination, you get a red stop-sign with an exclaimation point. When you select that disk, it says:
"You cannot install Server Administration Software on this volume. You are not allowed to install the software on this disk for an unknown reason."
I tried to open the package and manually extract the Server Admin Tools, but they do not run properly. I still cannot add computers to my managed list.
I have two machines, one that still has Server Admin 10.4.7 that was upgraded to Leopard without upgrading Server Admin. I am still having the problem. It seems that Leopard is creating the problem and not the Server Admin program.......
Message was edited by: Ron Yochum

Greetings,
Thanks for posting this I was so frustrated but now because of your post I wont have to go half way across the building with a monitor mouse and keyboard just to add a user.
Thanks so much.
Sincerely,
Jake.

Can't install Server Admin Tools..

Hello,
I run a MacOS 10.6.4 MacMiniServer and when I try to install the last update of the Server Admin Tools, the installer says, it can't be installed, because OS 10.6 is necessary?¿
Anyone seen that before? The update installs fine on my MacBookPro running 10.6.4 client.
cheers
admilon

I had a similar problem on an Xserve with SAT 10.6.3. I used Pacifist to update to 10.6.4.

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

I am not able to open iCloud from pc, error is "problem with the server". what should I do?

I am not able to open iCloud from pc, error is "problem with the server". what should I do?

Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes. You will then be able to access Settings>iCloud again.

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status

What is wrong with the Photoshop CC 2014 blur tool?

What is wrong with the Photoshop CC 2014 blur tool? It only blurs pixels of initial contact with the tool. It does not blur any pixels that are swiped by the tool as you drag it across the screen. Photoshop CS6 blur tool works just fine. Togeling between two versions of Photoshop to get the work done is a drag!

all my settings both in the Options Bar and the Brush Panel are the same whether in CS6, CC, or CC 2014.
Let’s see the screenshots.
Don't know how to post a screen shot
Use the camera icon.

Using my apple ID and password on Mobile Me, I get the message "Verification Failed" . Could not communicate with the server. What am I doing wrong?

Using my Apple ID and password on Mobile Me, I get the message "Verification Failed". Could not communicate with the server" What am I doing wrong?

There is a MobileMe forum. You might have better luck their.

My iphone can not get in touch with the server. What can I do?

My Iphone can not get in touch with the server, when I am trying to accept terms and conditions. What can I do?

Possible causes:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

What's up with the Server Admin Tools update 10.3.5?

Similar Messages

Maybe you are looking for