What's using all this storage?

When I look at the summary page in iTunes for my iPad Air, I see a bar near the bottom of the page broken up into various colored segments: audio, video, apps, etc. There is also one called "other". I can figure out what I have in the other areas but how do I find out what's using the most space in "other"? I'm getting close to running out of free space and I'd like to know who the worst offenders are so I can make an intelligent decision about whether they belong on the iPad or not.
Thanks!

Texas Mac Man post (2/10/2012) on "Other" data on iOS device - https://discussions.apple.com/message/19861751#19861751
https://discussions.apple.com/message/20053939#20053939 - "If it is much more than a gb or so, then it indicates corrupt files.  A restore should resolve." "If restoring using your backup didn't work, you'll have to save as much of your data as you can (import your photos to your computer, sync your contacts and other data with iCloud, email things like Notes and Voice Memos to yourself, sync with iTunes to transfer all your purchases, etc.) and then restore it as new without using your backup." - https://discussions.apple.com/message/20054011#20054011

Similar Messages

  • I got email telling me I used all my storage. I bought more but am unable to access all my emails. Help please

    I got an email telling me I used all my storage. I bought more but am unable to access all my emails. Help please

    I too have the same problem after I upgraded to Firefox 5 today. I have a Tiscali webmail account, it lets me sign in but a message is displayed that I have "undefined e-mails".
    I closed down Firefox and opened Internet Explorer. This allowed me to sign in and access my e-mails without any problems.
    Had to smile to myself as Firefox required my e-mail address to register and verify my new account so I could place a post or reply to other peoples posts etc. As previously mentioned I can only access these via Internet Explorer!

  • I am confused about how to manage photos between my iPhone, iMac and iPad.  How do I avoid using all the storage pace on my various devices?

    How do I manage photos between my ipad, iphone and imac without using all the storage on the various devices?

    If enabled, iCloud Photo Stream ensures all new photos are sent to all your devices. Then you can simply add the ones you want to each one's Library, and delete any photos you don't want.
    One technique is to designate one device as the "master" containing all your photos - probably your iMac, since it is likely to have the greatest available storage - and make sure you have a backup strategy for it. That way, any photos you choose to keep on your iPad and iPhone are redundant copies that can be deleted as you wish, or as required should you need to restore your iOS device. If your iMac breaks and its Library irretrievably lost, the importance of its backup becomes critical. Therefore, consider having more than one backup, and more than one geographical location for them.

  • HOw to create a Batch file for java application and whats the use of this ?

    HI,
    How to create a Batch file for java application ?
    And whats the use of creating batch file ?
    Thanks in advance

    First of all, you're OT.
    Second, you can find this everywhere in the net.
    If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
    javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
    Otherwise use:
    javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
    Don't specify the .class extension.
    Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
    The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
    This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
    Finally add dukes and give 'hem away.
    Bye.

  • BSP / Web-Dynpro (Java / Abap)  what to use in this case ?

    Hi all,
    i have some questions about all this BSP/Web-Dynpro stuff. We have an application (for health care written in Visual Studio) out there at our customers. Some of these customers are using SAP as their backend system. So we've writte some backend functionality (a cash processing, additional reports, a special invoice system etc.etc.) in Abap and Abap-Objects. Actually we are planing a new release for this backend stuff which is using the normal SAP Gui.
    Maybe we plan for the next release to convert our app to a Web based app and we discuss what SAP technology we should use for that.
    Here are my questions :
    - When and why should we use Web-Dynpro (Java) ?
    - Can't we use BSP ?
    - Is there any future for BSP ?
    - When will Web-Dynpro for ABAP be released (actually we are not a Java Shop so Abap is prefered)?
    Hope someone can answer my question.
    Greetings
    Henning

    If you don't mind, I am going to terminate discussion of Web Dynpro ABAP here. It is not that I want to, but we are in a difficult position with this development, and can not really discuss it too much.
    But, let me first make a few (last) comments:
    (*) BSP is available since WebAS 610 (which is now nearly at the end of its lifetime). WebAS 620 is the main platform out there, with NW04 (WebAS 640) now shipping, and the next product is inevitably coming. If you keep in mind that SAP supports each release at least 7 years, and we will be shipping BSP in an upcoming release, you can see that with BSP you are not going to left stranded for many years to come.
    (*) Web Dynpro Java is out and shipping. A very nice development environment. You can build nice things with it.
    (*) Web Dynpro ABAP: it will become a very nice product as well. We should know :). But, it will definitely not ship on NW04 platform. Which unfortunately means the next great NW shipment (both naming and date is not available).
    From our experience, most people seem to make their decisions based on the available Java versus ABAP skills in the shop. However, the other factor to look at is also "pixel perfect" rendering. Only with BSP can you influence the rendering. Web Dynpro is more a development platform for business applications, and as such they must conform to the designated model/concepts, etc.
    brian

  • How can I find out what is using all our home data?

    We have a huge amount of data every month but over the past few months we are cracking thru it like crazy.  I want to know what is using it all.  We have changed passwords to ensure it wasn't outside this house.

    Hello,Do you have mobile devices and tablet/s connected to your modem?If so, turn off "Background Data" in Data settings plus any automatic updates etc etc It could be that someone in your home is using it with high data downloads? If ou have multiple PCs, turn off automatic updates in Windows, to advise but not download.In your portable devices, there are a mutitiude of apps that update without your knowledge. Would need more information from you to make specific suggestions Hope this helps you RegardsProfessor PhoneI'm not a Telstra employee.  I have been a mobile subscriber since 1963.If my advice has been helpful, a Kudo  "tick"    would be most appreciated.If my advice has solved your problem, please also mark it as a Solution  

  • I have used all the storage on my iPhone 4S...can I move all my photos to iCloud?

    I have used up all my storage on my iPhone 4S, because I have a lot of photos that sync from my computer, a Mac with OSX 10.9.5.  Can I take the photos off my phone, and then stop the ones on my computer from syncing back to my phone?

    Greetings LOLKimmy,
    Welcome to the Apple Support Communities!
    I understand that you would like to import your photos that have on your iPhone to your Mac and stop iTunes from syncing your photo albums from your Mac back to your iPhone. To accomplish this, I would first suggest importing your photos to your Mac using the instructions located in the article below.
    iPhoto 9.5: Import photos or video from a digital camera
    After your pictures have been imported and you would like to removed your synced photos and albums from you iPhone, please follow the instructions located in the next attached article.
    Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support
    Delete synced photos
    In iTunes, locate and click on your device.
    Click Photos.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
    Click Apply.
    Learn how to delete photos and video synced from iTunes when you can't access the originals.
    Cheers,
    Joe

  • How can I see what's using all my hard disk space

    The other day I noticed my HD has 3GB left of memory, but my Home folder is only using 67GB. How can I figure out what is hogging all my space and get rid of it? I do use Bittorrent but I highly doubt that would account for the loss of free space.
    Message was edited by: Jeremy Sample

    Start with the freeware Grandperspective. The interface is a bit unusual, but it should help you figure out what's taking up all your space.
    And of course make sure you're emptying the Trash.
    Regards.
    Message was edited by: Dave Sawyer

  • SAPGUI_PROGRESS_INDICATOR what is use of this fun module when sending data

    dear ,
    what is use of
    SAPGUI_PROGRESS_INDICATOR  fun module when sending data to FTP SERVER . POINTS MUST BE GIVEN

    Dear ,
    when i am trying to send data in internal table of type charterter declared below(i.e iresult) to FTP SERVER program giving the DATA ERROR = 3 when 'FTP_R3_TO_SERVER' fuction module is exected and file it not creating in ftp server . plz help me pointS must be given .
    the FTP_CONNECT ,FTP_COMMAND function modules are executing properly giving handle 1 and its sy-subrc = 0 .
    when 'FTP_R3_TO_SERVER' is executed it is giving SY-SUBRC = 3 ( DATA ERROR ) i.e it is failing to out internal table data in FTP SERVER . PLZ HIDE ME ITS URGENT .
    THIS IS CODE I USED .
    DATA : BEGIN OF iresult OCCURS 5,
    rec(450),
    END OF iresult,
    DATA :
    dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
    compress TYPE c VALUE 'N',
    host(64) TYPE c.
    DATA: hdl TYPE i.
    DATA: BEGIN OF result OCCURS 0,
    line(100) TYPE c,
    END OF result.
    DATA : key TYPE i VALUE 26101957,
    dstlen TYPE i,
    blob_length TYPE i.
    host = p_host .
    DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
    CALL 'AB_RFC_X_SCRAMBLE_STRING'
    ID 'SOURCE' FIELD p_password ID 'KEY' FIELD key
    ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD p_password
    ID 'DSTLEN' FIELD dstlen.
    CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
    user = p_user
    password = p_password
    host = host
    rfc_destination = dest
    IMPORTING
    handle = hdl
    EXCEPTIONS
    not_connected = 1
    OTHERS = 2.
    IF sy-subrc = 0.
    CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
    CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
    handle = hdl
    command = ftppath
    TABLES
    data = result
    EXCEPTIONS
    command_error = 1
    tcpip_error = 2.
    IF sy-subrc = 0 .
    CLEAR result .
    REFRESH result .
    CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
    handle = hdl
    command = 'ascii'
    TABLES
    data = result
    EXCEPTIONS
    command_error = 1
    tcpip_error = 2.
    IF sy-subrc = 0 .
    DESCRIBE TABLE iresult LINES lines.
    blob_length = lines * width .
    clear : lines.
    Delete the existing file
    CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
    CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
    handle = hdl
    command = delfile
    TABLES
    data = result
    EXCEPTIONS
    command_error = 1
    tcpip_error = 2.
    *End of deleting the existing file
    CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
    handle = hdl
    fname = ftpfile
    blob_length = blob_length
    TABLES
    blob = iresult
    EXCEPTIONS
    TCPIP_ERROR = 1
    COMMAND_ERROR = 2
    DATA_ERROR = 3
    OTHERS = 4.
    IF sy-subrc 0 .
    WRITE 'Error in writing file to ftp' .
    ELSE.
    WRITE 'File downloaded on the ftp server successfully'.
    ENDIF.
    ENDIF.
    ELSE.
    WRITE : 'Path on ftp not found : ' , ftppath .
    ENDIF.
    CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
    handle = hdl.
    CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
    destination = 'SAPFTP'
    EXCEPTIONS
    OTHERS = 1.
    ELSE.
    WRITE 'Could not connect to ftp' .
    ENDIF.
    ENDFORM. " FTPFINANCEACCESS_DOWNLOAD
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
    IF screen-name = 'PASSWORD'.
    screen-invisible = '1'.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.

  • 500 gb hard drive 14 gb available --How do I determine what is using all of the space? Macbook os 10.6

    I recently acquired a Macbook that has a 500gb hard drive but I cannot find what is using the space. OS 10,6 installed and I do not have recovery disks. I would like to wipe and re-install/
    Thank you.

    Phone AppleCare and order replacement original disks, or if the computer shipped with 10.6.2 or earlier and you don't need the iLife applications, buy a Mac OS X 10.6.3 DVD from the online Apple Store.
    (81808)

  • What's Using All of My Data Storage?!?! Mysterious "Other Data" ???

    Has anyone found out the actual solution to this problem?!?! I had 12 of 13 gb used, less than 1 gb free. Why?? I've NEVER downloaded ANY games or side loaded ANY Android apps. After the 10.2 update I deleted all of my nonessential apps, including FB, Twitter, Foursquare, and LinkedIn. That leaves me with password protector, adobe reader, The Weather Channel, and Box (which, by the way, doesn't load anymore so it is pretty much useless). Now I have 8.81 used and 4.37 free. It's been said that the OS takes 2.5 gb. So what is the rest of this stuff and why can't anyone get rid of it without doing a wipe? Seriously, we have to do a wipe? All of my pictures, videos and music are on my SD card and it has 19.7 of 29.7 used. My pics, vids, and music is less than 12 gb. So why is my card full of that stuff, too?? And why am I yelling?!?! I've deleted everything that I can, even important things, cleared my cache and cookies, never downloaded games or Android apps, and never downloaded leaked updates. Why isn't Blackberry giving a solution? Or at least telling what this stuff is. Does anyone have any insight? Thanks in advance.

    Playzoutside wrote:
    Has anyone found out the actual solution to this problem?!?! I had 12 of 13 gb used, less than 1 gb free. Why?? I've NEVER downloaded ANY games or side loaded ANY Android apps. After the 10.2 update I deleted all of my nonessential apps, including FB, Twitter, Foursquare, and LinkedIn. That leaves me with password protector, adobe reader, The Weather Channel, and Box (which, by the way, doesn't load anymore so it is pretty much useless). Now I have 8.81 used and 4.37 free. It's been said that the OS takes 2.5 gb. So what is the rest of this stuff and why can't anyone get rid of it without doing a wipe? Seriously, we have to do a wipe? All of my pictures, videos and music are on my SD card and it has 19.7 of 29.7 used. My pics, vids, and music is less than 12 gb. So why is my card full of that stuff, too?? And why am I yelling?!?! I've deleted everything that I can, even important things, cleared my cache and cookies, never downloaded games or Android apps, and never downloaded leaked updates. Why isn't Blackberry giving a solution? Or at least telling what this stuff is. Does anyone have any insight? Thanks in advance.
    The sizes of the apps you deleted are not very large - FB 98MB. Twitter 8.4MB, Foursquare 13MB, Linkedin 5.7MB
    Look in Storage and Access - Device Storage details - Storage - Pie Chart and list of apps.
    Mine is System 2.55GB, Apps 1.68GB, User Files 63 MB, Free 8.89Gb.
    I have 5 pages of apps, which includes 8 android apps.
    Pictures and videos are all on sd card.

  • Question on what to use for this task

    Sorry new to this and I could really use some help.
    I have view that has and ID number, a Min and Max value and a TotalCount columns. I then have a table that has an ID number and an Email address.
    What I need to do is find all the records in the first table that the TotalCount value is either under the Min or over the Max. If so I then need to grab the Email address from the other table that has the corresponding ID number and then send an email to
    the email address I got from the second table stating that the ID number has gone over the Max or under the Min.
    This seems so simple yet I can't figure our how to do it in SSRS as an SSIS Package.
    Please help.
    Thank you

    your SSIS package will have following flow
    1. Create a Execute SQL Task which will have the below query
    SELECT EmailAddress
    FROM Table2 t
    WHERE EXISTS (
    SELECT 1
    FROM table1
    WHERE ID = t.ID
    AND (TotalCount < Min
    OR TotalCount > Max)
    Use Resultset option as Full resultset and map the resultset EmailAddress to a object variable (@[User::EmailAddressList]) created in SSIS
    2. Use a ForEach Loop with ADO enumerator which points to above variable
    Inside a loop add a variable [@User::EMailAddress]) to get iterated values
    3. Add a Sent Mail task inside loop and set an expression for ToLine property to point to the variable [@User::EMailAddress] so that it sents email to email address specified.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Why is the data getting eaten up. I had an 8 GB plan since Jan and have done nothing differently since. All of a sudden, my jetpack is using all this data and getting messages saying I am going over my plan. I increased the plan a few days ago and still g

    HELP

    I really wish the forum mods would make it more obvious when it comes to creating post titles vs the content... now we have no idea what we missed out on.
    First of all Jetpacks don't consume data, your personal devices do.  If your data plan is starting to reflect high data usage then one or more of your personal devices are to blame.  That means that for the time being you should get into the habit of powering on and off your Jetpack only as it is needed.  This will curb off the strange or late night download sessions so that they only occur when you are actively using your Jetpack.
    From there its a game of cat and mouse to figure out which device is demanding all the data from the VZW network.  You have to  use isolation techniques in addition to trial and error to find the source of the data leak and put a stop to it.  Sometimes that means bringing the device to a hotspot and letting it finish its updates.  Sometimes that means a new VZW device.  Sometimes that means termination.  Adding more data doesn't help the problem, its a band aid at best.

  • What is using my SD storage?

    my Air SD storage is nearly full, 114 GB used with 7GB free.  Yet when I look at the contents of the drive, I can only account for 76GB used, in the Appl, Library, System and User directories.  Why can't I account for the rest of the storage?

    See here for answer about what is taking up space:
    http://pondini.org/TM/30.html
    and here:
    http://pondini.org/OSX/DiskSpace.html  
    Seen in your "about this MAC" under storage as "OTHER"

  • What to use for this problem?

    Hi.
    I have a data set containing 500 parameters (for example). The data set should be clustered to 3 or more clusters and all of clusters should belong to 3 and only 3 groups (it means several clusters may belong to one group). My problem to solve is to find 3-7 paramets (from that 500) for which the found clusters will be the most precise as possible (theirs' boundaries will be best visible).
    What ODM method should I use?

    QuickTime is not an app you can download to the iPad
    However, many users have had success with an app called OPlayer HD to view their videos. And, there is a lite version so you can see if it'll work for you before plunking down the cash for the fancier version. VLC Media Player app is another possibility.
     Cheers, Tom

Maybe you are looking for