What's wait time for ATT order nowadays?

I see from Apple's retail web site that most locations now have plenty of inventory.
Does anyone have any idea what the wait time is for iPhones ordered thru ATT?
I have a rather complocated change in my plan to make and feel that ATT will be better to handle than Apple store but I have a really narrow window of time to get one i.e. Aug 19-22.
Message was edited by: nedhamilton

Go to your AT&T store and ask for an iPhone 8G or 16G whatever floats your boat as far as music and video memory goes. When I went there, I paid for a pre-order $208.95. They pinged my credit card on July 19th and didn't charge it until it was shipped on 7/29 and picked up on 7/30. 7/31 they fulfilled the charge.
So it's at least 12 days yes. But if they don't have it in stock then it's that much of a wait time.

Similar Messages

  • When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

    When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

    While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value.  Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered.  For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather"  Apple iPhone 6 Case.  The store had plenty of all the other colors, but that specific case and color had sold out that morning. 

  • What does the option 'Settings- incorrect waiting time for status' do ?

    Hi All
    We had an infopackage that seemed to be hanging this morning . (Yellow Status) I was advised to access the option 'Settings->incorrect waiting time for status' and set the wait time to 7 minutes (from 7 hours). This changed the status to Red.
    I then re-ran the ipak and reset the ''Settings->incorrect waiting time for status'  to 7 hours. This made the red process go back to yellow and the run time started going up again.
    Can someone explain what is going on. Have I got 2 instances of the same ipak running simulateously. Why did the red one come back to life even thoug I deleted the request in data target for that ipak.
    Thanx
    HKF

    Thanks, Verdi - the first time I enabled,/ or disabled, I hadn't realised what had actually changed, as I think I'm so used to seeing my links open in Safari anyway!

  • What are the settings for  rework order  quality inspection

    HI,
    Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
    What are the settings for rework order Quality inspection?

    Refer beautiful document
    http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

  • How to increase the waiting time for response in Adapter Engine not in IE

    Hi Experts,
                It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired.  We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
    kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with  status flag Log version.
    Thanks & Regards,
    Srihari.

    Hi,
    Please see
    How To... Investigate Timeouts In Synchronous XI/PI Scenarios
    It will answer all your queries
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

  • What is the field for sales order type?

    pls tell me what is the field for sales order type??
    and from which table........urgent

    Hi,
    Field for sales order type is AUART in table TVAK
    the Parent table for Sales order type is TVAK.
    Best regards,
    raam

  • What is release strtegy for sales order

    hi gurus
    what is release strategy for sales order
    can any one throw some light
    points awarded.
    kishore

    Dear Rama,
    There is nothing like release strategy for sales order. There is a release strategy for purchase order. A bit of search on sdn forum in MM section will help you a lot on this area.
    For your reference, The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
    Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
    e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order.  There is only one characteristic created in this example.  For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
    CT04 - Create Characteristic   e.g.  NETVALUE
    Click Additional data Table name CEKKO      Field name  GNETW    and press enter
    (for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
    In the Basic data (X refers to tick),
    X    Mutliple values
    X    Interval values
    In the Value data, in the Char. value column, type >10000 and press enter
    Save your data
    CL02 - Class
    Class - Create REL_PUR
    Class type - 032
    Click Create
    Description - Release Procedure for Purchase Order
    In the Same Classification section, click Check with error
    In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
    OMGS - Define Release Procedure for Purchase Order Type
    Release Group - New entries
    Rel.group   Rel. Object   Class                 Description
      02                                 REL_PUR        Rel. Strategy for PO
    Release codes - New entries
    Grp         Code
    02           01
    Release indicators
    Release indicators           Release        Description
          0                                                        Blocked
          1                                     X                Release
    Release Strategy
    Release group   02
    Rel.strategy    01
    Release codes   01
    Release status   0
                            1
    Classification   Choose your check values
    OMGSCK - Check Release Strategies
    (make sure there are no error messages)
    Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
    Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
    In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header.  This allowed the buyers to check the release status of the Purchase Order.
    The person with the release authorization have to use ME28 to release the Purchase Order.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • How to add wait time for any of the process in Process chains?

    HI
    I want to add the wait time for the process in the process chains. How to do it?
    Regards
    Priya

    Hi there,
    Here you go:
    REPORT  ZREPORTNAME. "the name of your report
    WAIT UP TO 90 SECONDS. "a wait is set to 90 seconds before starting the chain
    "call your chain to be executed after that
    CALL FUNCTION 'RSPC_CHAIN_START'
      EXPORTING
        I_CHAIN             = 'ZYOURCHAIN'. "the name of the chain you wish to run
    Diogo.

  • 11 hour wait time for movie rental!

    Over Christmas I got a 2nd generation Apple TV. I was excited but didn't have the time to try it out until tonight. I rented Iron Man 2 in HD and after letting it load for over an hour, I came back to watch it, only to see a wait time of over 11 hours. Is their anything I can due to speed it up? I have no problems renting movies on my macbook. I'm very frustrated.

    I'm not an expert either, but the basic idea is that the DNS servers route the internet traffic and commonly cache web pages to speed them up. DNS services claim to be faster than your internet provider and usually provide some claimed protection against fraudulent sites. They also offer some filtering options.
    I was using OpenDNS. You can get the idea of what it does here: http://www.opendns.com/solutions/household/
    However, if you don't know what it is, then you're probably not using it. You would have to deliberately set it up.
    I may be wrong, but I think the idea that these services cause an issue is that your download has to go through the one place rather than finding the fastest place. So, there is a backlog with lots of people now downloading internet video. I've read in a few spots that this is B.S., but since I'm not a computer engineer, I really don't know either. I can only say that on the one test, it was faster without OpenDNS than it was with it.
    I'm going to keep trying and see. I'd rather keep OpenDNS if I can.

  • Overcharged 7 times for pre-order & NO REFUND!!!

    so i pre-ordered the new SOAD album, and iTunes charged me 7 times for it! i would not have even noticed except i use online banking and say that there were 7 charges in a row for $10.99 on my account from PayPal. i emailed iTunes who said that i would have a refund in 3-5 days. well, today is day 6 and still no refund. to top it all off, the pending refunds from iTunes have been "removed" from my PayPal account. so what, they are stealing my money? anyone else with this problem? i am so angry and disappointed that they did not even email me or fix the error until i said something!!!

    I to was charged multiple times, 9 to be exact. See my thread here: http://discussions.apple.com/thread.jspa?threadID=258740&tstart=45
    iTunes support has ignored my last two e-mails regarding this matter, (I just sent another 'new' one in hopes of it not getting ignored) its amazing to me they aren't going out of their way to help get this resolved since it was a obvious billing error/problem on their side with paypal.
    I just want an immediate refund so I can move on to another music service other then iTunes.
    TrackID: 1271283
    L

  • Release date and time for Purchase order

    Hi Masters,
    Could you please let me know that in which table the release date ane time will get stored for purchase order.
    Regards,
    Panneer

    Hi,
    You can find out from CDHDR & CDPOS table.
    Select Date Time from CDHDR table & Join with CDPOS table where CDHDR-OBJECTCLAS = EINKBELEG and CDHDR-OBJECTID = PO number and CDPOS-TABNAME = 'EKKO' and CDPOS-FNAME = FRGZU and CDPOS-VALUE_NEW = 'X'.
    You will get the date time from CDHDR table.
    Regards,
    Udayasankar Rajagopalan

  • What is  Sap Scripts for purchase order

    hai,
    what is the sap script or smart form for purchase order,
    and how to modify the existing standerd one.
    explain me in step by step.

    hi
    Please ask question on sapscript in sapscript forum.
    use sap script form  medruck for PO
    SmartForm /BPR3PF/MMPO_L is the standard delivered Purchase Order in 4.6c
    Transaction code m/34 allows you to associate your 'Y' copy of the standad PO to your included company specific PO requirements such as company log graphic and other particulars.
    Go to transaction OMFE. Tell me what you see there for the output type you are interested in. Let me take the standard output type NEU. The entry looks something like this.
    NEU Purchase order 1 SAPFM06P ENTRY_NEU MEDRUCK.
    The first one is your output type, next is its description, next is the medium, then the program, routine, and the form name.
    You already copied the layout MEDRUCK to ZMEDRUCK. Now copy SAPFM06P to ZZSAPFM06P. Now ENTRY_NEU routine is in the include FM06PE02. You need to make your changes here to accommodate for the new field. So copy this include to ZZFM06PE02 and make your changes. Also, in ZZSAPFM06P, change the line where it says INCLUDE FM06PE02 to INCLUDE ZZFM06PE02.
    Now in this routine ENTRY_NEU, there is a function module call ME_READ_PO_FOR_PRINTING which reads in the PO data from the tables. We need to copy this function module as well as this is where you will do your extra selections for the new fields. You will do the same with the other function call ME_PRINT_PO, if you need to change anything on the print.
    after this to define output type...
    NACE
    You can track the form and the print program used for that form
    NACE is used to create output type while creating the output type you will mention forms, and driver program.
    that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
    so check in NAST, TNAPR table
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
    Condition records in NACE?
    EX--in simple terms..take a transaction say ME21N ( Purchase Order ), u can see a Print icon there. now when u click on this icon, it has to print the PO document. Now how does it do that? when u click Print, the control gets transffered to a print program, now which program gets triggered is decided by what program name u specify in NACE.
    So in NACE>EF>Output Type>NEU>processing routine--> u can see some standard program already configured( maybe SAPFM06P n form MEDRUCK )..these are the programs n sapscript that gets executed wen u say "PRINT" in the transactrion...so u can customise the print program for customer changes over here by copying the standard program n form into a Z/Y one and replacing the program names in NACE.
    Yogesh N
    Edited by: Yogesh N on Aug 20, 2008 3:19 AM

  • Wait time for 5 min in process chain

    hi Guru,
    how to add in the process chin for wait time 5 min.
    two flat files are there, once the complete of first flat file wait for another 5 min for the second flat file load.
    my question how to add a condition for 5 min wait time , the flat file load after 5 min(means second process is trigger after 5 min).
    Thanks in advance
    Edited by: priya das on Sep 29, 2008 5:02 AM

    See if below threads are useful -
    waiting time in process chain
    Set delay for process in process chain (BI7)

  • What is the Program for Sales Order Line Item Rescheduling

    Hi,
    There is a background scheduled job which does sales order line items rescheduling but I could get the name of the Program/Function Module by looking at the Jobs log. Can any one please help me?
    When does the rescheduling happen? Does it happen while creating delivery for the order? I need to understand the rescheduling the process to solve a bug in the User Exit / Screen Exit.
    Appreciate your help in Advance.
    Thanks,
    Kannan.

    If you know the job name, than you can find out the associated program name.
    Go to SM37.
    Select your job from the list
    Select "Step" ... here it will show you the program name
    Put cursor on the program name and Go to > Variant to know what was the input to run this job.
    Regards,
    Naimesh Patel

  • Long wait time for /sap/webcuif/uif_callback

    STAD shows following record indicating a very long wait time. Seems the application /sap/webcuif/uif_callback mentioned in the record is a CRM WebClient UI framework related service defined in transaction SICF. I did not observe such long wait time on other HTTP requests and applications. Why could this happen? How to analyze further? The system is CRM703 SP03.
    CPU time                       0 ms
    RFC+CPIC time                  0 ms
    Total time in workprocs        3 ms
       Response time           49.658 ms
    Wait for work process     49.655 ms
    Processing time                2 ms
    Load time                      0 ms
    Generating time                0 ms
    Roll (in+wait) time            0 ms
    Database request time          0 ms
    Enqueue time                   0 ms
    Number      Roll ins            1
                 Roll outs           1
                 Enqueues            0
    Load time   Program             0  ms
                 Screen              0  ms
                 CUA interf.         0  ms
    Roll time   Out                 0  ms
                 In                  0  ms
                 Wait                0  ms
    Frontend    No.roundtrips       0
                 GUI time            0  ms
                 Net time            0  ms
    Call number                                         6
    Connection-Id          6CAE8B34B9581ED49BF5441DA68E2F2A
    Communication step     Send/Receive
    Timestamp              20141119 131100 CST
    Host                   XXXXXXXXX
    Port                   8001
    Path                   /sap/webcuif/uif_callback
    Status phrase          OK
    Status code              200
    Protocol               HTTP
    Method                 POST
    Virtual host               0
    Calling time                                        2  ms
    Remote exec. time                                   0  ms
    Data send time                                      0  ms
    Data receive time                                   0  ms
    Idle time                                           1  ms
    Sent data                                         107  Bytes
    Received data                                   2.682  Bytes
    Thanks.
    Regards,
    Jason

    Hello Jason,
    the "Wait for work process" means the request was at the dispatcher queue waiting for a work process.
    Probably at that time all  the DIA work processes in that instance were occupied.
    was that the case?
    kind regards,
    Mercedes

Maybe you are looking for