What's with disk errors that disappear, sort of?

1. MB started running slow. Activity monitor showed high CPU use when nothing was running.
2. Ran Disk Utility and it reported unfixable errors. Suggested wiping, reinstalling o/s and restoring from Time Machine
3. MB would then not boot.
4. Time passed with MB turned off. Could not get an appointment at the Genius Bar.
5. Ran TechTool hardware diagnostic that reported problems on the hard disk
6. Booted holding Command+R
7. Boot succeeded. (Ran a Time Machine backup to capture the latest.)
8. Shutdown and restarted
9. Succeeded
10. Shut down and booted from Recovery Partition
11. Ran disk utility diagnostic.
12. No Verify errors, no Permission errors.
13. Ran TechTool again. Volumne Structure test failed.
14. TechTool said Volume Structure Rebuild could not be completed.
15. Rebooted normally with no problem.
What the @%#$ is going on?

You might want to run the Apple hardware test to see what it says: http://support.apple.com/kb/HT1509
Download Smart Utility from http://www.volitans-software.com/smart_utility.php and see what it says about the health of the drive. It will also give you visibility to the SMART sensor values.
The preceding two steps are to try and verify that the hardware is in good shape. Sometimes, though, if a drive is sick, it can show differing symptoms. How old is your MBP?

Similar Messages

My Safari keeps crashing and coming up with an error that says CrystalDVDto.png caused Safari to quit unexpectedly. Any suggestions on how to resolve this issue?

My safari just started crashing and coming up with an error that says CrystalDVDTo.png forced Safari to quit unexpectedly. I am not sure what to do or even what this is. I have done various searches for this plug-in but cannot come up with much. I went to Help>Installed Plug-ins and nothing appeared. What can I do?

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update, as well as any other updates available for your system. That should clear the infection.
Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding step, not before.

I am trying to install xcode on a macpro running OSX 10.6.8 . It installs, but with the error that there is no unix support.Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?

I am trying to install xcode on a macpro running OSX 10.6.8 . It installs, but with the error that there is no unix support. Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
thx,
Pandabig

Xcode 4.x cannot be installed on Snow Leopard. You need a 3.x. So if that is what you used then yes, you need to install lion. If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

What are the possible errors that can happen in data loads(rsmo monitor)?

hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
pooja

Hi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
<u><b>[email protected]</b></u>
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

What are the common errors that occur while extraction is carried out?

Hi all,
What are all the errors that occurs while extraction for fico, sd and mm?
Can anyone list me the errors along with the solution.
regds
hari

Hi hari shankar
It depends
Like the data level errors ,Short DUmps
USER EXIT ERRORS
some time source system code errors.
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Winners dont do different things,they do things differently**
> Hi all,
>
> What are all the errors that occurs while extraction
> for fico, sd and mm?
>
> Can anyone list me the errors along with the
> solution.
>
> regds
> hari

What are all the errors that can be corrected by using tran code rsrv?

hi all,,
what are all the errors that can be corrected by using tran code rsrv?
can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv.
regds
hari

Hi Kalyan,
I have urgent need of the RSRV DOCS.
Can you mail it to [email protected]
I will highly appreciate.
Thanks in Advance
SS
Points will be awarded

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

Disk error that I can't repair despite logical steps

1. I ran Disk Utility within OSX and detected a disk error but the option to repair was grayed out
2. I ran my back up system to ensure I have an up-to-date clone on my LaCie external HD
3. I booted Norton Utilities from CD which couldn't repair the error
4. I ran Apple Hardware Extended test which said there were no hardware problems
5. I began wondering if it was a software issue rather than a hardware one...
6. I booted Disk Utility from my Tiger Install DVD which also detected a disk error but could not fix it
7. Thinking that reinstalling Tiger might do the trick, I tried to 'Archive and Install' Mac OS X Tiger from the DVD twice, but each time it was unable to complete the install and asked me to start over again
Any ideas how to fix this error?
I am working quite intensively with iMovie at the moment, which crawls on my 3 year old 1 GHz PowerBook. One file has grown to a whopping 18 GB in size. Could this be part of the problem? I performed permissions repair, disk verification and defrag successfully last week before starting on my iMovie project, so the system was pretty well optimised, I thought.

Thanks, Miriam. I regularly run Utilities to ensure my system stays in good condition. Especially as I work with images a lot and sometimes - like now - with video. So, it was routine maintenance I guess. However, some applications have been a little slow to open or struggled to open files recently as well.
Regarding Disk Warrior etc, being an individual rather than a corporate user, obviously I'd rather avoid spending the money unless I absolutely have to. In addition, being in UK, it may take time for the disk to arrive and I don't think my nearest Apple Store stocks Disk Warrior - it's not on the UK online store anyhow (strangely). TechTool Pro is more expensive still. Sorry if I sound stingy, I just am being careful with my money. If I need to buy Disk Warrior, of course I will.
Thanks, A Brody, for the welcome. I regularly clone my entire system so I have a bootable backup, but thanks for the reminder anyway!
I appreciate the comments from both of you about Norton in this regard.
Since the Apple Hardware Extended test indicated no hardware faults, am I right to think it is probably more to do with software? Or should I be concerned about my hard disk or other hardware?
PowerBook G4 Mac OS X (10.4.5) 1 GHz PowerPC G4 | 1 MB L3 cache | 768 MB DDR SDRAM

Have upgraded computer from windows me to win 8 and tried to install an old version of photoshop elements. It starts but ends with an error that I must have internet explorer 4.0 or greater. What do I need to do?

Can anyone help?

First we need to know how much free space your windows 8 hard drive has.
Do you still have access to the computer with Windows ME?

I have a PDF form that I want to pre-fill multiple fields with example text that disappears onFocus. Is there a way to do this?

Pretty much what my subject line says. My client wants example text in the fields of a PDF form that will disappear when the cursor enters the field. When I try this with show/hide layers, the layer becomes visible as soon as I enter form editing mode, and the action doesn't work properly. Any help? I was able to get it to work with a single field, but multiple fields with example text on multiple layers doesn't work for some reason.
Thanks for any help.

Hi Jeffrey ,
You need to use a custom Format script for the field.
Regards
Sukrit Dhingra

What is with this error message?

Usually after my computer is on for a bit, iTunes begins to get an error message that says "STATUSWAIT0". Even restarting iTunes doesn't help it, the only way to fix it is to reboot the computer and then it will come up again after some time. It's pretty annoying. Does anybody know what this message is referring to and what to do about it?
When I run diagnostics, the "reading status" light is orange. I don't know what I'm supposed to look for here but this is what the text says.
===============================
Found aspi32 running.
IDE\DiskMaxtor6B300S0_________________________BANC1980, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPIONEERDVD-RW__DVR-108_________________1.04___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_DVD_RW_ND-2510A____________________2.15___, Bus Type ATA, Bus Address [1,0]
SCSI\CdRomXL0218JUFO724B________2.0B, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: PIONEER DVD-RW DVR-108, Rev 1.04
Drive is empty.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
F: XL0218J UFO724B, Rev 2.0B
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 26:12 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
============================
I'm on a PC (XP) using the 7.0.1 version of iTunes
Windows XP Pro

What is your connection speed (www.speedtest.net)?
Check www.istumbler.net or netstumbler for interference
Ensure you are using your ISPs DNS

What's with this error message?

   import java.awt.*;
   import java.awt.event.*;
   import java.awt.image.*;
   import javax.swing.*;
   class Gfx extends JPanel
      //declarations
      public Gfx()
         img = new BufferedImage(1020, 730, BufferedImage.TYPE_INT_RGB);
         buffer = img.getGraphics();
         buffer.setFont(new Font("Monospaced", Font.BOLD, 12));
         //initialize arrays
         addKeyListener(new KeyListener());
         new Timer(0, new Listener()).start();
      public class Listener implements ActionListener
         public void actionPerformed(ActionEvent e)
//code
drawStuff();
            repaint();
      public class Keylistener extends KeyAdapter
         public void keyPressed (KeyEvent e)
            int key = e.getKeyCode();
            if(key == (int)('x') || key == (int)('X'))
               System.exit(0);
            else colorseed = (int)(Math.random()*9999 + 1);
      public void drawStuff()
             //draw stuff
      public void paintComponent(Graphics g)
         g.drawImage(img,0,0,getWidth(),getHeight(),null);
      public Color getColor(int num, int brightness)
         int red = num / 256;
         num = num - (num / 256) * 256;
         int green = num / 16;
         num = num - (num / 16) * 16;
         int blue = num;
         return new Color(red * brightness, green * brightness, blue * brightness);
   public class life
      public static void main(String[] args)
         JFrame frame = new JFrame("The Deeper Meaning of Life");
         frame.setSize(1020,730);
         frame.setLocation(3,3);
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         frame.setContentPane(new Gfx());
         frame.setVisible(true);
   }When I compile this I get the following error message:
KeyListener is abstract, cannot be instantiated. Whats with this ?

Ummm... another problem. It just won't do anything
(hitting keys doesn't affect the program at all). And
if I insert SetFocusable(true);, it won't recognize
it.
Whats with this?Your keyPressed() method sets a 'colorseed' variable, but I don't see where that variable is actually being used. So maybe in fact it is invoking your keyPressed() method when you type, but your method doesn't do diddly.
As far as SetFocusable(true) goes, Read the javadocs. In this case, maybe you're looking for a method named setFocusable (note the lower-case 's') - method names aren't usually capitalized.
http://java.sun.com/j2se/1.4.2/docs/api/index.html

What happen with de error 148:3?

I can not open my Adobe Photoshop CS 4 , the error 148 : 3 . What should I do to fix it ?

yes, this is a licensing error and most of them can only be fixed with a reinstall and proper serialization.
Mylenium

What is this long 'error' that came up?

As soon as i turned on my macbook pro, it said that it needed to be restarted 'a message in the middle of the screen on great background and written in many languages'. When it came back on, i got this error below, can anyone tell me what it is... although i already think its stupid Himachi, as its not the first time i see the same message;
Interval Since Last Panic Report: 267972 sec
Panics Since Last Report:          1
Anonymous UUID:                    F2DDCBCE-BC08-4124-B575-95EB169DB82A
Tue Jun 26 18:44:29 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f80b1634b, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000004300000007, CR3: 0x0000000021dc201a, CR4: 0x00000000000606e0
RAX: 0x0000004300000006, RBX: 0x0000000000000002, RCX: 0xffffff7f80b19922, RDX: 0xffffff800b545d40
RSP: 0xffffff807ec039a0, RBP: 0xffffff807ec039f0, RSI: 0x000000008020690c, RDI: 0xffffff800ccf3408
R8: 0x0000000000000000, R9: 0x0000000004e7818e, R10: 0xfffffe80056beae8, R11: 0x000000000005127c
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff800b379bd8, R15: 0xffffff800af6fb38
RFL: 0x0000000000010286, RIP: 0xffffff7f80b1634b, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000004300000007, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807ec03650 : 0xffffff8000220792
0xffffff807ec036d0 : 0xffffff80002c473a
0xffffff807ec03880 : 0xffffff80002da0cd
0xffffff807ec038a0 : 0xffffff7f80b1634b
0xffffff807ec039f0 : 0xffffff7f80b199b1
0xffffff807ec03a30 : 0xffffff7f80b17a0e
0xffffff807ec03a70 : 0xffffff8000347137
0xffffff807ec03ac0 : 0xffffff800039f33d
0xffffff807ec03b30 : 0xffffff80003a0b43
0xffffff807ec03cd0 : 0xffffff8000341dcc
0xffffff807ec03da0 : 0xffffff8000341f82
0xffffff807ec03dd0 : 0xffffff800056687f
0xffffff807ec03e10 : 0xffffff8000566920
0xffffff807ec03e40 : 0xffffff8000533d73
0xffffff807ec03e70 : 0xffffff8000563a64
0xffffff807ec03f60 : 0xffffff80005ccfe8
0xffffff807ec03fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
         com.logmein.hamachi(1.0)[4F10A12D-34FD-ACB0-81FB-036809497AFC]@0xffffff7f80b150 00->0xffffff7f80b1cfff
BSD process name corresponding to current thread: hamachid
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 60498871790
last loaded kext at 52762051460: com.logmein.hamachi     1.0 (addr 0xffffff7f80b15000, size 32768)
loaded kexts:
com.logmein.hamachi     1.0
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.filesystems.ntfs     3.10.1
com.apple.filesystems.autofs     3.0
com.apple.driver.AudioAUUC     1.59
com.apple.driver.AppleTyMCEDriver     1.0.2d2
com.apple.driver.AGPM     100.12.42
com.apple.driver.AppleMikeyHIDDriver     122
com.apple.driver.AppleHDAHardwareConfigDriver     2.2.0f3
com.apple.driver.AppleHDA     2.2.0f3
com.apple.driver.AppleUpstreamUserClient     3.5.9
com.apple.driver.AppleMCCSControl     1.0.26
com.apple.driver.AppleMikeyDriver     2.2.0f3
com.apple.kext.ATIFramebuffer     7.1.8
com.apple.driver.AppleIntelHD3000Graphics     7.1.8
com.apple.driver.SMCMotionSensor     3.0.2d6
com.apple.driver.AppleSMCPDRC     5.0.0d0
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.iokit.IOBluetoothSerialManager     4.0.5f11
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleSMCLMU     2.0.1d2
com.apple.driver.AudioIPCDriver     1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin     5.0.0d0
com.apple.driver.AppleMuxControl     3.0.16
com.apple.driver.AppleLPC     1.5.8
com.apple.ATIRadeonX3000     7.1.8
com.apple.driver.AppleBacklight     170.1.9
com.apple.driver.BroadcomUSBBluetoothHCIController     4.0.5f11
com.apple.driver.AppleUSBTCButtons     225.2
com.apple.driver.AppleUSBTCKeyEventDriver     225.2
com.apple.driver.AppleUSBTCKeyboard     225.2
com.apple.driver.AppleIRController     312
com.apple.driver.CoreStorageFsck     182.11.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     33
com.apple.iokit.SCSITaskUserClient     3.2.0
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCISerialATAPI     2.0.3
com.apple.iokit.IOAHCIBlockStorage     2.0.3
com.apple.driver.AppleUSBHub     4.5.0
com.apple.driver.AppleFWOHCI     4.8.9
com.apple.driver.AirPort.Brcm4331     530.4.20
com.apple.driver.AppleSDXC     1.2.0
com.apple.iokit.AppleBCM5701Ethernet     3.2.4b8
com.apple.driver.AppleEFINVRAM     1.5.0
com.apple.driver.AppleSmartBatteryManager     161.0.0
com.apple.driver.AppleAHCIPort     2.3.0
com.apple.driver.AppleUSBEHCI     4.5.8
com.apple.driver.AppleUSBUHCI     4.4.5
com.apple.driver.AppleACPIButtons     1.5
com.apple.driver.AppleRTC     1.5
com.apple.driver.AppleHPET     1.6
com.apple.driver.AppleSMBIOS     1.8
com.apple.driver.AppleACPIEC     1.5
com.apple.driver.AppleAPIC     1.5
com.apple.driver.AppleIntelCPUPowerManagementClient     193.0.0
com.apple.nke.applicationfirewall     3.2.30
com.apple.security.quarantine     1.3
com.apple.driver.AppleIntelCPUPowerManagement     193.0.0
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib     2.2.0f3
com.apple.driver.AppleSMBusController     1.0.10d0
com.apple.iokit.IOSurface     80.0.2
com.apple.iokit.IOSerialFamily     10.0.5
com.apple.iokit.IOFireWireIP     2.2.4
com.apple.iokit.IOAudioFamily     1.8.6fc17
com.apple.kext.OSvKernDSPLib     1.3
com.apple.driver.AppleHDAController     2.2.0f3
com.apple.iokit.IOHDAFamily     2.2.0f3
com.apple.driver.ApplePolicyControl     3.0.16
com.apple.driver.AppleSMC     3.1.3d8
com.apple.driver.IOPlatformPluginLegacy     5.0.0d0
com.apple.driver.AppleSMBusPCI     1.0.10d0
com.apple.driver.AppleGraphicsControl     3.0.16
com.apple.driver.IOPlatformPluginFamily     5.1.0d17
com.apple.driver.AppleBacklightExpert     1.0.3
com.apple.iokit.IONDRVSupport     2.3.2
com.apple.driver.AppleThunderboltEDMSink     1.1.8
com.apple.driver.AppleThunderboltEDMSource     1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter     1.8.2
com.apple.kext.ATI6000Controller     7.1.8
com.apple.kext.ATISupport     7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB     7.1.8
com.apple.iokit.IOGraphicsFamily     2.3.2
com.apple.driver.AppleFileSystemDriver     13
com.apple.driver.AppleUSBBluetoothHCIController     4.0.5f11
com.apple.iokit.IOBluetoothFamily     4.0.5f11
com.apple.driver.AppleThunderboltDPInAdapter     1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily     1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.4
com.apple.driver.AppleUSBMultitouch     227.1
com.apple.iokit.IOUSBHIDDriver     4.4.5
com.apple.driver.CoreStorage     182.11.0
com.apple.driver.AppleUSBMergeNub     4.5.3
com.apple.driver.AppleUSBComposite     4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.2.0
com.apple.iokit.IOBDStorageFamily     1.6
com.apple.iokit.IODVDStorageFamily     1.7
com.apple.iokit.IOCDStorageFamily     1.7
com.apple.iokit.IOSCSIArchitectureModelFamily     3.2.0
com.apple.driver.AppleThunderboltNHI     1.5.5
com.apple.iokit.IOThunderboltFamily     2.0.0
com.apple.iokit.IOUSBUserClient     4.5.8
com.apple.iokit.IOFireWireFamily     4.4.5
com.apple.iokit.IO80211Family     420.3
com.apple.iokit.IOEthernetAVBController     1.0.1b1
com.apple.iokit.IONetworkingFamily     2.1
com.apple.iokit.IOAHCIFamily     2.0.8
com.apple.iokit.IOUSBFamily     4.5.8
com.apple.driver.AppleEFIRuntime     1.5.0
com.apple.iokit.IOHIDFamily     1.7.1
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     177.5
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.DiskImages     331.6
com.apple.iokit.IOStorageFamily     1.7.1
com.apple.driver.AppleKeyStore     28.18
com.apple.driver.AppleACPIPlatform     1.5
com.apple.iokit.IOPCIFamily     2.6.8
com.apple.iokit.IOACPIFamily     1.4
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 4 GB, SMC 1.69f3
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_third_party
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0253, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

francescod95 wrote:
although i already think its stupid Himachi,
You are correct. Remove it from your system.

What's with disk errors that disappear, sort of?

Similar Messages

Maybe you are looking for