What's with the imac wireless keyboard?? New batteries won't work!

What's with the imac wireless keyboard?? New batteries won't work!

I figured it out. It wasn't easy. I took the keyboard battery tube apart. Photos are posted here:
http://flickr.com/photos/martingreen/sets/72157611216768360

Similar Messages

  • Help with the Palm WIreless Keyboard

    Hello all,  I have a Palm Tungsten E2 device with the universal wireless keyboard.  I am familiar with most of the functions of the keyboard however there is one thing I have found elusive to this point.  I'll do my best to describe the issue in detail so here goes. 
     My problem occurs when I open the calendar using the wireless keyboard shortcut (Fn + 4). I press the sequence and my palm pilot opens the calendar to the default "agenda" view, which is fine, but from there I want to navigate to the "daily", "weekly" or "monthly" view quickley (without using the stylus). I know to reach "daily" I press (start + enter) in the "agenda" view which highlights the first scheduled task for that particular day then pressing (start + enter) again opens the "daily" view.  From there I can enter appointments as I see fit. But, what I want to do is navigate directly from "agenda" to "monthly" or "weekly".  Is there a way to do this with a shortcut key combination? Also,  I don't want to change the pilots default calendar setting from agenda to monthly.  
    Hopefully this makes sense,  please let me know if there is a way to do this, also, if more information is required please post and I will respond.
    Thanks,
    CKF
    Post relates to: Tungsten E2

    For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
    Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
    Oh as a side note the check if this is your solution is only if the answer solves your original question.
    Message back if you have more question or need more help
    Post relates to: Palm Z22

  • How to change the battery in the imac wireless keyboard

    how to change the battery in the imac wireless keyboard?

    FYI, there is no "iMac" wireless keyboard. 
    If you have an Apple Bluetooth KB, simply remove the plug (screws out) on the left top side of the KB.
    Barry

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • Z68A-G43(g3) issues with the Microsoft Wireless Keyboard 6000

    Hello,
    we've buils a new PC with the MSI Mainboard Z68A-G43(G3) and the PC hangs on the start with the code 92. We noticed that the issue is caused by some USB device. After many tests we found out that when the MicroSoft Wireless Keyboard 6000 v2 is connected to the computer, it stops to start.
    The keyboard is connected through the Microsoft Wireless Desktop Receiver 3.1 to the USB, which is used to connect the mouse as well.
    I'd like to use the kb + mouse set, how can I fix the issue.
    Also, I tried to update BIOS via the Live Update, and it's not working, the BIOS download fails.
    Any help is welcome.
    Regards,
    Michal

    The BIOS is 4.10.
    Also I forgot one note, the KB is working, but only when it's connected alone. When we connect to USB port another device (Flash Drive, USB Wireless, ...) the PC won't start. When the KB is removed, the PC starts without any problem.
    Also another note, when the KB was connected and the Zyxel Wireless PCI adapter was connected, PC doesn't start, when KB is disconnected, PC starts.
    So there seems to be some issue with the MS device.
    Regards,
    Michal

  • I hate problems! Am I the only one? New quicktime won't work OS 10.3.9

    I have a Dual 1.25 GHz PowerPC G4 running OS 10.3.9 just as the new quiketime requiers. It wont't respond! It won't start. I tried downloading 3 times. Help?! I tried to do the reienstalls and it's not working as well.
    Dual 1.25 GHz PowerPC G4   Mac OS X (10.3.9)  

    I zaped the P ram and trashed the QT preferences.
    Any other suggestions?
    I originally downloaded through the software update along with the new iTunes. Itunes isn't working either. I suspect it is becasuse it can't see quiktime. I downloaded them directly from the Apple site and installed them again. Nothing.
    My FCP will not start probably because of the lack quiketime as well.
    My world over here is buggered up!
    none of the reienstalls work either.
    I had QT Pro 6.5
    I wanted to upgrade to the new QT cause of movies I cannot watch with older QT.
    Thanks in advance

  • Can I buy an imac at the applestore and have it personalized (for example have it with the non wireless keyboard)?

    Can I buy an imac directly at the applestore (milan) and have it with a cables keyboard instead of the wireless one?

    Give them a call  >  http://www.apple.com/it/retail/storelist/

  • Apple Wireless Keyboard - Shift + 'r' key not working. It doesn't capitalise the letter. Can someone help please. Thank you.

    Hi all,
    I am having some problem with the Apple Wireless Keyboard. It has not problem connecting to both my iPad mini / iPhone 4S.
    The problem comes when I start to type with it. All the keys are functioning will, except when I am trying to capitalise the letter 'r'.
    I tried using Shift + r. It doesn't work, regardless whether I use the left or right Shift key.
    Any someone help please. Thank you.

    If your Macbook is less than a year old, it is under warranty. A repair of of a problem of this kind would be free. So, if you have a warranty, have the problem fixed by Apple.
    If your Macbook is more than one year old, please tell us what operating system you are running, and any other information that would help understand what is going on.
    If you do get the keyboard to work for a short time, long enough to post back, please unlock the "caps lock" button.

  • My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

    My hard drive crashed on my Imac 24" 2009,  I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
    What external DVD can I get to work with the IMac?                              The Apple super drive is not compatible.

    Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

  • I am constantly being advised that my information has been accessed by a "new" iMac.  I only have ONE iMac. What gives? And what is with the constant request to "update" my information?

    I am constantly being advised that my information has been accessed by a "new" iMac. I only have ONE iMac. What gives? And what is with the constant request to "update" my information? As well, I have had to change my password a number of times since migrating to Yosemite; again: what's this all about? I Apple going the way of Microsoft for some reason? I left the Microsoft community because of constant problems with their OS and the unending string of "security updates"; is Apple and my iMac becoming "just another crap computer"?

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • New iMac wireless keyboard and magic mouse dropping connections

    Hi looks like I am just another one who's got problems with Apple's wireless keyboard (KB) and magic mouse (MM).
    I bought my iMac 21.5 at the beginning of last Dec. For the first few days, I noticed that the connection between MM and iMac dropped perhaps once a day when I was editing some HD footage in iMove 09. I am rather new to Mac so initially I thought iMove was dominating CPU power hence the temporary drop.
    But in the next few days, I found my MM dropped connection a bit more frequently like 3-4 times a day, during word processing, browsing in Safari or even when I am doing nothing. Plus I also noticed that the KB began to have the same problem as well. Well, in all cases the communications resumed almost instantly or shortly after I clicked MM or a button on the KB. It's only the on-screen notices are very annoying....
    The situation got worse in the final week of 2010, the connection (both MM and KB) dropped more frequently and sometimes communication didn't resume instantly, instead the Bluetooth Setup Assistant pops up searching for available devices....and then finally connected. Annoyed by this I took the MM to the retailer and swapped for a brand new one (from a boxed iMac), came home and hey! problem solved! but just for a MERE few hours.
    On the last day of 2010, after a couple "rounds" of drop-and-reconnect I was hit by the "Bluetooth Not Available" problem after a connection failure. Left it for some moments and no sign of recovery at all! Luckily and ironically I plug in my wired USB Microsoft mouse so that I can still navigate, went to System Preference and found the Bluetooth icon disappeared as if no Bluetooth hardware was ever installed at all! OK, turned off the iMac from the menu, waited and restarted. No joy and scary enough, I can't even get into the system coz I got log-in enabled but without a working KB to enter my password. Without a choice I dug out my netbook PC, arrived in this forum and found I wasn't the only one. Followed instructions here, did a SMC reset, PRAM reset, etc then magically everything is back! Once back in, I deleted the plist, deleted devices, restarted, re-favourite MM and KB, etc. The next day, I use the installation disc to perform a hardware check, but no problem found!
    But always a but, the problem still persists, so a call to Apple technical support who suggested literally the same thing I've done above and asked me to monitor the problem in case it needs repair. Honestly, I am not keen to do that as the nearest Apple centre is far from me and always busy. Not sure if anyone here can shed some lights on my problem. I needa ensure all channels are exhausted before I bring the thing back to Apple for an inspection as a last resort...
    Many thanks guys

    Hi, I post this because this is very similar to what is happening with my new 27in Imac.
    Townsville March 05 2011 bought all singing and all dancing 27inch IMac with wireless KB and MM at new reseller grand opening. Straight forward out of the box. First night a kernal panic message and screen shut down and unable to start. Phonecall to apple care got it restarted with the apleoption+pr keys. Fine for a while, then repeated screen freezes watching eye TV.
    Persevered, with similar repeated screen freezes. Reset memory for eye TV. Seemed to fix that problem, but during this time also noticed MM and KB were disappearing and not responding, only to come back by frustratingly turning them on and off, waving them near the imac and even turning the imac off and on manually, to have them come back for a while and even dragging out a cable mouse to navigate. Cut a long story short, I hoped it would sort itself. 20 days later while watching eye tv I noticed the mm and kb drop off. Cable mouse found the BT issue you guys have discussed. System Preferences showed no BT at all. Rang apple care. Went through the same drill and identified a hardware problem with BT which should be replaced, and after discussion about the other issues, suggested a replacement would be within range but to talk to the store, cause it was so new, took it back to store where my story was confirmed in a confirmation of the customers story check.....for a while.....
    then all reappeared as if nothing was wrong, fortunately it was witnessed by the store, so off it went to Brisbane for the 4 day turnaround. Wednesday the tech rang BT MM and KB all working fine. Further explained all the above, so he has stress tested it and I am informed it is has displayed none of the bad behaviour and is working well and on its way home, hopefully by monday. So will keep you posted. No new mac offered, no replacement BT module offered.
    PS I have only ever owned macs, still love them, and scripting this on my mac book, which incidentally, has never missed a beat.

  • Is it possible to use the Apple wireless keyboard with the iPhone 6? Will the Magic Mouse work with iMovie on iPhone6 Plus?

    iPhone 6 page says that iMovie is a (free) application available for iPhone 6. When I use it on the desktop I need a mouse. Should I expect all controls to be touch-sensitive, or is it possible to use the wireless Magic Mouse? Similarly, if I want to type an email or a long document, is it possible to use the Mac wireless keyboard to enter text? With the iPhone 6 Plus taking over for laptops (phablet), it seems to me that input tools are relevant. Maybe what I'm asking is whether the iPhone6 (OS8) has drivers for these devices. Please advise.

    Apps that are designed for iOS devices such as the iOS version of iMovie are intended to be used entirely by touch. It's worth noting that iMovie for iOS is not absolutely identical to iMovie for Mac OS.

  • What software comes with the iMac ??

    was going thru the ordering online screen and I can't find what software comes already loaded. Can someone point me to a link or give me a list?
    I have heard that Apple offers something besides appleworks for wordprocessing? Is that true. I've never used anything but Apple word processing. Is MSWord offered now?
    thx - Craig

    Hi. 
    This is the iMac (Flat Panel) forum for G4 iMacs but I'm assuming that you will be purchasing a brand new Intel iMac so will provide details for those instead.
    The following list is taken from this page (link)
    Mac OS X v10.4 Tiger (includes Spotlight, Dashboard, Mail, iChat AV, Safari, Address Book, QuickTime, iCal, DVD Player, Xcode Developer Tools)
    iLife ’06 (includes iTunes, iPhoto, iMovie HD, iDVD, iWeb, GarageBand),
    Microsoft Office 2004 for Mac Test Drive*,
    iWork (30-day trial)*,
    Big Bang Board Games,
    Comic Life,
    Omni Outliner,
    Apple Hardware Test
    Front Row
    Photo Booth
    * despite Apple's TV Adverts both Microsoft Office and iWorks are both limited time trials. AppleWorks is still available for sale separately but is not optimized for Intel processors so has a limited life span. Therefore a proper word processor is no longer bundled with the iMac at all. Only the very basic TextEdit will allow you to type letters etc. You'll have to pay extra if you want more; so you could buy Word or Pages. Personally I'd recommend NeoOffice (link) which is a free download and unlike Microsoft Office is Intel native and compatible with Office2007.
    Hope that helps.
    mrtotes
    Message was edited by: mrtotes. Beaten by Duane again for all the pertinent points.....

  • I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?

    I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?

    AS Tesserax said you must
    disconnect your laptop from the existing wifi network
    Connect to the default Apple Networkxxxxxxxxx - that is your AEX open network
    Go to the Airport Utility and set the AEX router to extend the Existing Network >> in the AirPort Tab > Wireless Tab >> Wireless Mode - choose your Linksys network and enter credentials - your AEX should now join the Linksys network
    Then switch back to your original wifi network and your AEX should show in the AirPort utility as well, extending the range of your Linksys network, green light on
    PS: Win XP support for WP2 authentication downright *****. Even with SP3, get ready for some "cannot connect" warnings. My Dell laptop from work would have major issues connecting to my home's AirPort WPA2. I had to downgrade to WPA at some point.

  • We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

    We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

    Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

Maybe you are looking for

  • Regarding "iTunes": sound noise, per say;

    Regarding "iTunes": I adjust the audio properties via the speaker icon in the bottom right hand corner of my monitor, tried to update audio driver's (Realtek, Microsoft, HP), adjust the equalizer in "iTunes", and the volume on my PC's speaker's - ("C

  • Can Not  installed latest iTunes 10.5.2 for Windows XP

    To System support, I am having trouble installed latest iTunes 10.5.2 for Windows XP. When I start install the exe file, I got an error message: "There is problem with this Windows Installer package. A program run as part of the setup did not finish

  • How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?

    Sir, How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP? Regards

  • Filetorfc

    Hi friends, when I am using file to RFC i am using synchronous interface but in runtime it is showing proccessing mode is asynchrounous what could be reason please help thanks & regards peddarapu

  • AppStore app is not on my iPad

    Please tell me AppStore is not on my iPad