What's with the "the signal and noise numbers" got to do with anything ?

hi,
i've been seeing posts about this but it's still not clear to me.
can anyone help me understand this ?

read this: http://discussions.apple.com/thread.jspa?messageID=11094676#11094676.

Similar Messages

  • HT3743 I bought a used iPhone 3 from eBay my husband tried to update it and all that comes up on the screen now is the imei and iccid numbers with iTunes icon and a USB have I bought a dud or what

    I bought an iPhone 3 from eBay and when my husband tried to update it all that comes up on the screen is the imei and iccid numbers along with the iTunes icon and a USB. I can only use it for emergency calls as that is all that happens when I slide it on. Have I paid $250 for a dud phone or what can I do to fix it. Any help would be appreciated .

    Sounds like your iPhone was hacked to unofficially unlock it. You can put it in Recovery mode, connect it to iTunes and Restore it in iTunes. Then you will need to call AppleCare, give them the model and serial numbers and find out which cell provider it is locked to. After you get that information contact that cell provider and see if you can get it officially unlocked.

  • What extensions accept the iPad and iPhone movies? Can I put any film of any length and with subtitles?

    What extensions accept the iPad and iPhone movies? Can I put any film of any length and with subtitles?

    This is from the developer website (I feel like this is old, since it doesn't say anything about HD resolutions):
    iOS supports many industry-standard video formats and compression standards, including the following:
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats
    H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per second, Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in.m4v, .mp4, and .mov file formats
    Also, there is a great app called VLC which supports almost any format under the sun! You can put media in it through iTunes.
    https://itunes.apple.com/us/app/vlc-for-ios/id650377962?mt=8

  • How to find what are all the rules and events are monitoring for specific server in SCOM 2007

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.
    Thanks for the question Sandoss. This is something that we all come across at sometime.
    Thanks & regards, Sumit Agrawal
    The lack of this feature is an inexcusable oversight for an enterprise management product.  They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down. 
    BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server. 
    The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well.  I'd like some feedback if something is missing.
    DECLARE @srv varchar(30)
    SET @srv = 'your name here'
    SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
    case
        when s.HealthState = 1 then 'healthy'
        when s.HealthState = 2 then 'Warning'
        when s.HealthState = 3 then 'Critical'
        else 'N/A'
    end as Health
    FROM state AS s WITH (NOLOCK)
    left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
    left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
    where
    bme.FullName like '%' + @srv + '%'
    and s.HealthState <> 0
    and mon.IsInternalRollupMonitor = 0
    and mon.IsExternalRollupMonitor = 0
    order by bme.DisplayName, mon.displayName

  • TS1717 Error message received "iTunes has stopped working" when plug my classic ipod to laptop running window 7. It was fine before. Any idea what might be the problem and how to get it fixed? thanks!

    I have received window error message "iTunes has stopped working" everytime I plug my classic ipod to the laptop which running window 7. iTunes was working fine with the same ipod, but starts to receive the error msg. after the second plug to update the music files this morning. All the music files were removed from the ipod. Any idea what might cause the problem and how to get it fixed? thanks!

    Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
    Retract:15
    Reallocs: 0
    Pending Sectors:0
    Poweron Hours:556
    Start/Stop:5071
    Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not

  • I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

    I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • I had quite a few notes in the 'Notes' app. I suddenly find that all of them, except 3 have disappeared. What could be the reason and how can I get my notes back?

    I had quite a few notes in the 'Notes' app. I suddenly find that all of them, except 3 have disappeared. What could be the reason and how can I get my notes back?

    Not fully au fait with iCloud. I don't use it. But if you have done a backup to iCloud then this might help. This reply will refresh your post thereby giving others an opportunity to comment. Meanwhile, read up about iCloud in the User Guide. Here's the link to download it - http://support.apple.com/manuals/#ipad

  • HT1296 I have the original iPhone and I can't sync the address book from my Mac to the iPhone. What should be the problem and can I sync?

    I have the original iPhone and I can't sync the address book from my Mac to the iPhone. What should be the problem and can I sync?

    Thanks a lot for the answer. I'm so upset, have no even one contact on my phone. I has to do with the moving to iCloud from MobileMe.
    I did exactly what you wrote, and when trying to click the vcf file on the iPhone the screen freezing, and then after few long seconds it goes alon to home.
    So I tried less contacts in a Vcard, and i'm dividing my address book, doing little by little and it work.
    Thank you so much.
    I still dont get why the sync with my computer address book is not working.
    And why when I moved to icloud all the photos I had next to the contacts are disappered.
    I had my iPad, which it still, I did not move from MobileMe to iCloud and all the photos are there!
    Anything I can do to use the iCloud on the iPad as well and update the iCloud with the photos?

  • My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • TS3367 I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??

    I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Computer fails to boot up after password change. After new password keyed in, computer also asked for old password. But even when old password supplied, computer just freezes and fails to boot up. What is causing the problem and how can one solve it?

    Changed password on MacBook Pro recently. But after password change. Computer ask for old password, thereafter. Even when correctly supplying the old password. Computer system does not boot up and just freezes. What is causing the problem and how can one resolve the issue?

    OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
    Reset Password
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box under “Select user account”.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • When I put my iphone5 on charge no matter where I am and even when I have full signal my phone will always drop the signal and continue to have no signal until I take it off charge. Is anyone else having this problem?

    Everytime I put my iphone5 on charge now matter where I am and even when I have signal it always drops the signal and continues to have no signal until I take it off charge. I have the up to date software on it and everything and is relatively new. Is anyone else having this problem and how do I fix it?

    This is a user to user support forum.  We are all iphone users just like you.
    You are not addressing Apple here at all.
    This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
    "it's too fragile"
    No it is not.  i have never damaged one, nor has anyone I know.
    " U loose data when Ur phone is locked"
    No you don't.  Why do you think this?
    "and there is no customer support!!!  "
    Wrong yet again.  Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
    "but I will go back with Blackberry "
    Please do.
    Good ridance

  • .How do I find out what Version (generation) of Ipod touch I have, as I want to know if I can download IOS 5 onto it? It was a gift so I only know the model and serial numbers but not the type

    Hi, can anyone help me out with this question?
    How can I find out which version of Ipod touch I have. I only have the model and serial numbers as it was a gift, but I would like to download IOS 5 if it is compatible?
    Very frustrated Ipod user, any advice would be much appreciated.
    Lynda.

    I had the same problem because there are so many iPod models.  There is a great article in Wikileaks that explains it all and also has pictures.  I'm confident this answer your question.

  • I made an in app purchase and never received what I was supposed to. I contacted the producers of the app and they never got back to me. I then contacted apple and they said they would return my 25$ purchase. I still haven't gotten it. What do I do?

    I made an in app purchase and never received what I was supposed to. I contacted the producers of the app and they never got back to me. I then contacted apple and they said they would return my 25$ purchase. I still haven't gotten it. I am starting to feel like I just lost 25 dollars and both companies are sweeping it under the bus. I don't know what to do now. What should I do?!?!

    We are users like yourself. You are not speaking to Apple here. We are not able to help. Please call Apple to inquire.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers..
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

    Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

    Reinstall on both.
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.
    Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
         Tap Settings > General > Reset > Erase all content and settings.

Maybe you are looking for

  • B-frames, 4 motion vectors, I-frames, trellis quantization, quarter pixel??

    i'm using the program ffmpegx and it has all these options that I don't know anything about. can anyone tell me what these different options do and their advantages/disadvantages?

  • No PSG in settlement rule (table COBRB)

    Hi, I have a Sales Order which had a settlement rule created to PSG and had been settled already.  However, currently, the customer of that SO became invalid as well as contract type. So I tried to realign (KEND) this PSG, unfortunately, the current

  • Is it possible to sync an Ipod touch 2nd generation to itunes to download music?

    I have been trying to sync my Ipod touch 2nd generation to itunes and it says its completed, but then the music doesn't transfer to the device and I know I can't upgrade to IOS 5  so is it impossible to download music to it?  I just bought it today u

  • Do Commit is must to update the data at receiver JDBC

    Hi friends,     I have no live server yet, I am new to this JDBC adapter and even to XI. There is a need to develop a proxy to jdbc integration, once the server is up. I  read some forums and had an idea to do the same but, still there is a doubht ta

  • Status & Tracking system Question.

    Hello Everybody, Is it possible to by-pass a hierachial node during the planning process?. I mean there are three levels in my hierarchy level1 -- Person A responsible level2 -- Person B responsible level3 -- Person C responsible When Person C enters