!!!---What's wrong to my T61 order and my VISA card?
I had used my VISA card to order a T61 notebook from US LENOVO website on 3rd March,2008. It costs me $828.75.
But I found that someone charged me $828.75 again on 4th March, 2008. Then I called the VISA center to enquire about it, they told me that LENOVO charged me two times, one is on 3rd March(this is my order), and the other is on 4th March(who did it?).
Why? What's wrong? I ordered only one T61, how can LENOVO charge me two times?
And I promise that I had never give me VISA card information to anybody else, nobody can use it except myself, so it's the mistake of LENOVO.
I had sent a E-mail to lenove in US, but no reply.
Who can tell me why and give a answer? How can I get my money back?
Moderator Edit: Font formating removed for readability
Message Edited by billbolton on 03-06-2008 05:28 PM
kevinws2001 wrote:
from US LENOVO website
[Snip]
Who can tell me why and give a answer?
Lenovo in the US can.... call them!
Cheers,
Bill
I don't work for Lenovo
Similar Messages
-
What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.
Sorry, its on both my iphone 4s (2 iphones) and ipad2 that the app store is slow, I have done all the above and still when i download a 1 mb app it take about a half a hour just to download and previously it wasn't even a second. When browsing the web the devices are fast and internet speed is good, but when going in to app store it takes long to load and show me the new app, updates, featured app ect. We watch movie online and the streaming is brilliant. Even on my windows pc the app store is slow and sometimes says that i store could not be opened, i have also tried on my buddies wifi and there it does exactly the same which makes me think that its on apples side, but why do you not have any problems?
-
What is the difference between pick order and TO ?
Hello Gurus,
What is the difference between pick order and TO ? Can anybody throw some light on this?
Any document ..any link please share.
Helpful answers Dont offer any rewards
Thanks,
Nilesh
Edited by: Lakshmipathi on Dec 15, 2010 8:35 PMHello Nilesh,
Do you want the forum experts to do the search for you?
Please search the forum before creating a new thread...
Please refer here:
difference between picking request and transfer order
Hope this clarifies...
Thanks,
Jignesh Mehta -
Below is the email i sent to prometric following up my refund after cancelling an exam and being charged USD 15 for the cancellation fee, but no one is saying anything up to now or any explanation on when i should be receiving my refund.
Hi,
In regards to the above subject field and below cancellation details for an exam 070-681 -
TS: Windows 7 and Office 2010, Deploying.
I have cancelled for the exam and my visa card has been charged for the cancellation fee of USD 15, but i have
not received the refund as yet.
Please do the needful so that i can book for another exam as soon as possible.
Your urgency in this matter will be highly appreciated !
Sincerely,
Salim.
----- Forwarded Message -----
From: @prometric.com" <@prometric.com>
To:
Sent: Monday, August 25, 2014 1:08 PM
Subject: Prometric Exam Information (Z29LON501E)
Dear SALIM,
Thank you for cancelling your exam with Prometric, a leading worldwide provider of comprehensive technology-based testing and assessment services. Your cancellation request has been received and confirmed.
Included within this e-mail is your official appointment summary. Please retain this information for your records.
Included below are answers to frequently asked questions. Please do not reply to this e-mail. For additional assistance, you may visit our website at
Appointment Summary
Order Confirmation Number/Document Number: Z29LON501E
Candidate's Name:
SALIM MOHAMED
Candidate Address:
77852
NAIROBI, KE-300 00610 Kenya
Candidate Company:
Candidate Primary Phone:
Candidate Email Address:
@yahoo.com
Exam Details:
Program Name:
Microsoft (070, 071, 074, MBx)
Exam Name/Description:
TS: Windows 7 and Office 2010, Deploying
Exam Number:
070681
Exam Language:
U.S. ENGLISH
Appointment Date:
Appointment Time:
Appointment Duration (HH:MM):
4:00
Please note that the appointment duration may include an exam tutorial and client survey.
Test Site Code:
KN7H
Test Site Address:
57666,00200,1st Floor, Fedha Plaza,
MPAKA Road Junction, Westlands,
Nairobi, 00200 Kenya
Test Site Phone:
0203744720/
Payment Details:
Exam Price/Currency:
80.00 USD
Discount (if any):
0.00 USD
VAT/GST/Sales Tax:
0.00
Date of Payment/Tax Point:
24 AUG 2014
Total Amount Paid/Currency:
-80.00 USD
Payment Type:
VISA
Cancellation Fee(if any):
15.00 USD
Reschedule Fees (if any):
Payment Date
Amount Paid
Frequently Asked Questions
How will I obtain a refund?
If your credit card has already been charged and you are eligible for a refund, you will receive a refund along with a charge for any applicable fees. If a voucher was used, your same voucher number will be reactivated.
How can I Check my Appointment Status?
If you would like to review the status of your appointment, please visit. Choose "Candidate History" then login using your e-mail address and password.
What if I forget my Prometric Internet password?
If you forget your Prometric Internet password click on the following link
You will be asked to enter your e-mail address or user name, then a new password will be mailed to you at the email address you have on file with Prometric.
How do I update my candidate profile?
Please take a moment and confirm that your personal information listed above is accurate, as this is how your name will appear on any certificate earned and the address to which all certificates and communication will be sent. To ensure proper
delivery of your exam and all certification materials, Prometric must have accurate and current information. If any information needs to be updated, please visit choose "Update Personal Information", then login using your e-mail address and
password.
Please note: This address reflects your permanent, home address. To ensure delivery of official correspondence and certification material, you may also provide name and address information in your
country's official language.
Can I contact Prometric with specific questions?
If you have taken your test, plan to take a test with Prometric, or have any other concerns, please follow the appropriate links below to help solve your issues:Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
good night, do not know what is happening can not buy gold with my visa card for itunes gives me error, but I have money on the card, always worked but this time not accepted!!
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
What is wrong with my iphone4? and how can i turn it back on?
About a week ago, i was using my iphone that I've had about 6 months, no problems. It was working perfectly fine and then out of nowhere it shut itself off. I plugged it in, nothing happened. I pressed the home and lock button, and held them in, and still nothing happened. The next day I decided to plug it in again, and it told me to leave it plugged in, like it was dead or something (the red battery symbol popped up, and said it was charging) and about 10 minutes later the iphone came back on. The only problem was that from here on out my home button does NOT work, at all.
The phone was working................ until about 3 days later the same thing happened to it again, except the next day it did not come back on the same way. My mom took it to the AT&T store (living in west virginia, there aren't any Apple stores near by). She came home with it working again, but I have no clue how they got it back on.
A few days after the second time it shut off, it happened again. We took it to AT&T again, and this time they couldn't get it back on, but they gave us some tips. We plugged it into itunes, and restored it. I was over the amount of space. I had no storage left!! So I went through and deleted all my music, and about 500 photos (having around 1,200) . I now have about 700 photos, 20 songs, and roughly 15 apps. ONE day after I did all of this, my phone shuts off for the fourth time !!!! (It is off right now) Seeing how I have 3 GB of space left on my phone, I would think it's not a storage issue.
I've plugged it into the wall charger, nothing! I have tried to reset it holding the home button (which still does not work) and lock button, still nothing. I have now plugged it into itunes. It says the device is found, but not identified please restore the device. So I restore it, but that doesn't help, Itunes still cant "identify" the device and it is still not on.
I have checked for water damage, and there is not any! I just want to know what is wrong with it, and how to fix it. OR maybe if I just need to get a whole new phone, because mine is under warranty. The problem is AT&T won't give me a new one and there isn't an apple store near me! Can someone PLEASE help?I think you might get a new phone instead of repairing it as it takes time and you said the repairing center is far from your living place
-
What's the Best LCD (20"/ larger) and best Graphic Card choice /G4 733DA?
I know very little about the great choices for flat panel displays and also graphics cards on a Mac G4 733DA
So any recommendations would be sincerely appreciated.
What's a good LCD (20"/ larger) and the best Graphic Card choice for a G4 733DA? A friend recommended an ATI 9800 Pro (Mac Edition) Is this a good choice?
My current G4 733 Digital Audio has a standard VGA port as well as an ADC port.
Will I need to upgrade the existing graphics card if I’m looking to view wide screen?
Here's what i currently have on my g4 for a graphics card:
NVIDIA GeForce2 MX:
Chipset Model: GeForce2 MX
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 32 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0110
Revision ID: 0x00a1
ROM Revision: 1045F
Displays:
VGA Display:
Resolution: 1024 x 768 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Lastly, is 1080p even possible on this mac system provided I perform the above upgrades to say an ATI 9800 Pro (Mac edition)? Or will this also require a major dual processor CPU upgrade?
SDMacuserThe ATI Radeon 9800 Pro is the best card you can put in a G4 Power Mac. As for supporting HD, I believe its a mix between CPU and GPU, based on your system. The Radeon 9800 should support HD, and any HD supporting LCD. Price, wise, for a HD ready screen I'd say the a high quality Dell LCD would be good (it uses the same panel as the Apple 20" LCD) but costs less. You should not have to upgrade your CPU, although it would not hurt to look into it.
-
What security code i should give while giving my visa card number
hello, i just adding my new user id to apple itunes.but while processing the visa card number and security code ,it saying that my security code is invalid.
For Visa cards, the security code is a three digit number on the back of the card:
-
Wondering what is wrong with the Answers site and signing in?
As the subject suggests, I'm having tremendous difficulty signing in to MS Answwers to simply ask a question about my IE8 always having sounds playing from ??? after it has been closed down completely, and why MS Answers is preventing me from signing
in to ask this question?Thank you Juke Chow,
Overall, I've calmed down from the incident, however I still am a little miffed at MS for the following issue: After I had problems signing in with the Answers site, I would seek help elsewhere, but again evrything asked that I "sign in" to be able to post
questions which is fine, BUT remember the fact that I was having issues SIGNING IN! If I cannot sign in on Answers, I find that signing in anywhere else is often difficult as well... so it just adds to the issue! How can anyone who is having problems
signing in to any site, to ask a simple question, get help when they have to still sign in in order to ask a friggin' question? Seems to me that something was not thought of there... most people are not idiots, I might have falled for it at one
time, but I have learned a few things about companies like MS, and that is that they always get their bottom line to increase, meaning they will charge an arm and a leg if you send in issues on a program that is not because of something you did, but a problem
with the program itsself.
Even now, I do not remember why I came in for help, because of this (censorted) junk issue with signing in to ask the original question! Why I had the issue to begin with. But now I do remember why I came in to ask... simply because IE8 is doing
it again right now. I am sitting here typing this message, and I am hearing some sort of iddiotic advertisement... it is only sound and when I close down my IE, I get (censortd) crap still! Even when I try to open up my Task Manager, it never shows
where the audio is coming from. I'm sorty but this is (Censored! And I want it stopped as soon as possible, perhaps I will switch over to one of my other browsers to see if this crap stops.
Here is the exact issue I am seeing (hearing): While here writing this message, I suddenly hear in the background some "navigation"sounds like clicking on links,, then the advertisement audio starts up... say for instance I am watching some other videp
and this begins? IMHO everyone who is making these programs is really screwing everything up. And I tried IE 9 BETA, I did not like it, because IE is becoming a lame program like most any other MS product now, but MS is such a momopoly in software,
so everything operates around MS, which is (censoredd).
While here on this site, I got some sort of pop up message asking me if I want to open some site, not knowing what it (the site) is in the first place, I clicked on yes... now I get popups every few seconds teling me the site has had a problem of some
sort and Internet Explorer has stoopped workign, here is the current pop up message: "Internet Explorer has stopped working A problem caused the program to stop working correctly. Windows will close the program an d notify you if a solution
is available."I click on the Close Program button, and right away another window pops up saying the same thing... it goes on and on and on, this is Bull (Censored). Browsing used to be easy and entertaining, now with all theis Bull, it ceases to be that
way, I suggest MS get's off their butts and figures it out and stop charging an arm and a leg to help people with this crap. -
What's wrong with my AJAX process and '&'
On the page where I create a new record, in my branch I set P10_ID with the newly created primary key and then page 10 loads.
I have and onload call in the header of page 10 - onload="getValues(document.getElementById('P10_ID'));"
I want to set my page 0 items, which works, except if I use an ampersand character in one of my fields. I'm having a hard time understanding why...what's so special about the ampersand? I've tried converting to a hex and ascii value but my page 0 items will not set. I get a javascript error that reads: '0' is null or not an object. When I spell out 'and' instead of using the ampersand character, my page 0 items ARE set correctly.
Here is the code...
My getValues function is:
function getValues(pValue) {
var xml = null;
var get = new htmldb_Get(null,$v('pFlowId'),'APPLICATION_PROCESS=Set_Page_Zero',0);
get.add('AI_PRIMARYID',pValue.value);
ret = get.get('XML');
if(ret) {
var lName = ret.getElementsByTagName("LASTNAME");
if(lName) {
var last = document.getElementById("P0_LASTNAME");
last.value = lName[0].getAttribute("VALUE");
var fName = ret.getElementsByTagName("FIRSTNAME");
if(fName) {
var first = document.getElementById("P0_FIRSTNAME");
first.value = fName[0].getAttribute("VALUE");
get = null;
My application process is:
DECLARE
vFIRSTNAME varchar2(100);
vLASTNAME varchar2(100);
BEGIN
owa_util.mime_header('text/xml',FALSE);
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
htp.prn('<DATA>');
select firstname, lastname into vFIRSTNAME, vLASTNAME from addresses where pk_id = :AI_PRIMARYID;
htp.prn('<FIRSTNAME VALUE="' || vFIRSTNAME || '"></FIRSTNAME>');
htp.prn('<LASTNAME VALUE="' || vLASTNAME || '"></LASTNAME>');
EXCEPTION WHEN OTHERS THEN
htp.prn('<FIRSTNAME VALUE="No records exist"></FIRSTNAME>');
htp.prn('<LASTNAME VALUE="No records exist"></LASTNAME>');
END;I can't copy and paste so hopefully I haven't made any errors while retyping.
Any idea what the problem is and how to fix it?
Thank you,
TammyHi,
Thanks for that - I'm not sure how I find the time either!!
Firstly, I would replace & with a silly character that is not likely to appear in the text - something like ^ perhaps.
So, in the process:
select REPLACE(firstname,'&','^'), REPLACE(lastname,'&','^') into vFIRSTNAME, vLASTNAME from addresses where pk_id = :AI_PRIMARYID;then in the javascript:
last.value = lName[0].getAttribute("VALUE").replace("^","&");It is possible that this may have to be:
last.value = lName[0].getAttribute("VALUE").replace("^","& amp;");(there's no space between the & and amp; - I've had to add that in for the post!)
Andy
Edited by: ATD on 11-Nov-2009 17:49 -
What is a table containing sales order and the contract it refers to
Hi,
I have a following problem (ECC6.0):
A sales order is created in VA03 and referenced to a contract. I need to locate the table or tables (or FM) which contains the information of the sales order number and the contract number.
Problem with VA03 is that I can see both numbers in the document flow screen; i.e. sales order (Doc.no) is xxxxx and the Preced.Doc field contains the contract number. However, this is only an ALV view. I cannot get anywhere from the program SAPMV75F.
I have checked table VBAK and it contains most of dat but not the link itself as it has any sales document. I need to have an entry containing the link between a given sales order (+item) and the contract.
Instead of creating with "Create with reference" and select Contract (which you need to refer to), the system is defined so that contract is used with a hierarchy customer. Debugging of creating did not help as the linking was conducted in the background without activation of debugging screen. I'm not an SD and no experience with contract.
Help is highly appreciated,
PipsaHi,
The field VBAK-GUEBG is used for valid from and valid to date,
you can find the Preceding and Subsequent sales and distribution document under table 'VBFA'.
under SMOD, you can find below exit use for Contract data modification:
V45W0001 Function module exit for copying sales header data into
items.
This enhancement contains the user exit:
- EXIT_SAPLV45W_001
regards
Vivek.
Edited by: Vievk Vardhan on Jan 29, 2010 3:13 PM -
What is wrong with my iPod.. and how can i fix it?
ok.. my 5G iPod was working fine.. then i couldnt get it to eject from my iBook.. on my computer screen it said that it was ejected.. but i iPod never said ok to disconnect. a few moments later and my iPod was back on my computer screen.. it did this multiple times..
i eventualy shut off my computer to disconnect my ipod. and that worked fine (or so i thought)
i unplugged my iPod and went to go listen to a couple new songs i just put on it.. and it skipped through the songs without playing any of them. (when my ipod was connected to my iBook i was listening to those songs from my iPod and they worked fine)
so it was ******* me off.. i went to go turn off my iPod before i went to bed, but it wouldnt turn off.. so i decided to leave it on my deskfor the night.. it drained my battery.. that didnt bother me too much.. casue i expected it to happen.
so i plug my ipod back into my computer to charge it up.
(the iPod image does not appear in the finder or itunes)
a few hours later i go to check on it.. it just had the apple logo screen up.. so i tried resetting it.. then a screen came up and said "please wait. Very low battery" so i left it alone. i go back to check on it about 6 hours later... same thing happens over and over and over again.
(the iPod still does not appear in finder or itunes)
so what should i do?Hi,
I had the same problem. charging through the computer didn't work for me and it said (just like at yours) "please wait. Very low battery" without backlight.
I bought a adapter (which I thought had te same power as the USB, but anyway) I charged it with this piece of heaven, and it worked. It needed 1 hour to charge it. (I have a 5G iPod with video btw)
good luck!
Martijn -
When in iTunes Store sample tunes cut out after 15 seconds - would be nice if I could listen to the entire sample play. I'm using Windows 7 and have latest iTunes software. Anyone have a solution?
I had the same problem, finally found a similar question on here and what resolved it! Hope this works for you..
1st:click START
2nd: ACCESSORIES
3rd: RIGHT CLICK on COMMAND PROMPT *a window will pop up..which will say "Run as Admin." ..you must put in Admin. password*
4th: CLICK CONTINUE
5th: *a black screen then comes up..and from where the words end (it's blinking)...continue from there... simply type
ipconfig/flushdns ...then it the ENTER KEY
Let me know if this works for you. Good luck.
MistyBlues -
What is wrong with this Java class and method?
Created a managed bean and following method as shown below.
public void setEvent(DisclosureEvent disclosureEvent, CoreShowDetail detail) {
if (disclosureEvent.isExpanded()) {
detail.setDisclosed(!detail.isDisclosed());
-- Then integrated above in the following jspx.
<af:showOnePanel inlineStyle="width:400px;height:300px;"
binding="#{ShowApanel.showOnePanel1}"
id="showOnePanel1">
<af:showDetailItem text="ADF Faces Components"
binding="#{ShowApanel.showDetailItem3}"
id="showDetailItem3" disclosureListener="#{ShowApanel.setEvent}">
<af:panelHeader text="ADF Faces Components First Child"
binding="#{ShowApanel.panelHeader6}"
id="panelHeader6"/>
<af:panelHeader text="ADF Faces Components Second Child"
binding="#{ShowApanel.panelHeader5}"
id="panelHeader5"/>
</af:showDetailItem>
<af:showDetailItem text="Architecture"
binding="#{ShowApanel.showDetailItem2}"
id="showDetailItem2"
disclosureListener="#{ShowApanel.setEvent}">
<af:panelHeader text="Architecture First Child"
binding="#{ShowApanel.panelHeader4}"
id="panelHeader4"/>
<af:panelHeader text="Architecture Second Child"
binding="#{ShowApanel.panelHeader3}"
id="panelHeader3"/>
</af:showDetailItem>
</af:showOnePanel>
THE ISSUE:[b]
I am still not able to programmatically disclose or undisclose the panel component.
Where am I going wrong? Please help.
Thanks,
RuchirHello Frank,
I put several print statments but none of them is executing on browser. Does this mean that the method is not being called even once?
public void setEvent(DisclosureEvent disclosureEvent, CoreShowDetail detail) {
System.out.println("HelloServer Exiting ...");
if (disclosureEvent.isExpanded()) {
System.out.println("HelloServer Exiting1 ...");
// detail.setDisclosed(!detail.isDisclosed());
System.out.println("HelloServer Exiting2 ...");
Thanks,
Ruchir -
Starting to wonder if the iPhone's been hacked into. The Iphone was working perfectly fine just a short time ago...only 48 hours ago. I never saw a screen on the front of the front of the phone which showed an iTunes Icon at the top of the screen and a cord going down to the bottom of the screen before. I cannot use the phone, get online to get to the internet, take photos of anything.
The phone was working perfectly the day it started working very very strangely and I was able to use the phone, see the time of day, take photos, get online, etc.
How do you fix the phone? I am not going to "restore" the phone & get ALL my info, photos & everything deleted!
Think we need to change the phone number because we also got a strange phone call from a phone number we never saw before!
Need some help. as I'm sure people CAN hack into smartphones.It's in recovery mode. It's tryijng to tell you to plug it into iTunes and restore it.
LuvsMacs2014 wrote:
I am not going to "restore" the phone & get ALL my info, photos & everything deleted!
I hate to tell you this, but ALL your "info, photos & everything" are already gone.
You don't have a choice.
Maybe you are looking for
-
Airplay not working (only works through iTunes)
Hi, I am having problems getting my Airplay to work on my Pro. If I am playing music through iTunes and have Airplay selected music will play through the Airplay speakers. However, when I Option-click the sound icon at the top right of the screen and
-
Limitations in weblogic server 8
I found a major limitation in weblogic 8. There is no direct way to test/validate the CCI connections. Also destroy the faulty connections. I found a way to destroying the faulty connection but unfortunately i am getting some exce
-
Applet dont show the Components
Hi, Ive embedded applet in a jsp page. Initially appearance of applet is coming well. After some time during the process of applet , when the browser window is minimized and restored or if we are switching to any other window and coming back to the
-
I have ios6 on my iphone 4s. I want to install the ibooks but it is saying ios7 is required. Can I still get ibooks for ios6?
-
Logic pro 9 wont save automation data on multi license verrsion
I use Logic Pro 9, installed as an image on an Apple xserve for which we have purchased a multi license agreement. Logic will not let the user save automation data.