What's wrong with LR5 Slideshow and the time it takes to render a 900 image show?

I just updated my LR5 with great expectation that the "Bug" would be fixed. "NOT" ........... I used the slideshow feature to display/create 700 wedding image slideshows for my clients. In LR 5 or LR5.3 when I try to play a show, I have to wait an "UNGODLY" amount of time [Six Hours???} before it plays. Heaven forbid I make changes and then it has to render again. LR4 played wonderfully. I should go back and ask for my $$$ back for the $$$'s spent upgrading to LR5. BTW, I have a very fast machine with lots of memory so it's NOT my machine.
Can anyone tell me what is going on?
And/Or if Adobe is attempting to fix this issue?
Also If I choose to go back to LR4, will my catalogs still be read by LR4?
If I go back to LR4, can I get my money back?

3.0 Zeon processors x 2
2 Quads
16 GB memory
SSD scratch disk
SSD Boot disk
2.0 terabyte Raid 5 storage
Photoshop CS5
LR 5.3 Updated today
One image renders every 6 seconds in building my slide show
I'm encouraged by your comment
Canon 1DS Mk III 21 - 28 Mp each RAW Image [Same as you I believe]
LR 4 .............. I always by passed the render and the show played perfectly
What else do you need?

Similar Messages

Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

hi my
iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
thanks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. What is wrong with iTunes? Is the server down???

I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. What is wrong with iTunes? Is the server down or what? I need to download some things and update some apps...

I've been getting the same message for like an hour now. Since everything was working fine a few hours ago, and nothing changed on my end before it stopped working, I'm guessing it's something on Apple's end. They probably already know about it by now, and are hopefully working on fixing it, so there's probably not much we can do but wait for them to fix it.

What is wrong with icloud mail and how do I fix it?

What is wrong with icloud mail and how do I fix it?
I put the icloud mail login address in the browser, it brings up the login screen.
I put the login details in correctly, it says icloud has stopped responding, I always send to Apple.
It restarts and I get the right screen, below, but all of the icons are blurred out. If you hover over them they sometimes indicate what they are but won’t let me launch them.
I am using an Advent Laptop with a Celeron processor with Windows 7 and the browser is Internet Explorer 11 for Windows 7. (I know I am expecting a lot of it). All of my software is up to date.
Any ideas? I a not very techy but I'm not afraid to have a go...it communit question. Thanks fr your help.

Hello, Fightlikeaninja.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
Cheers,
Jason H.

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
This is actually "specific" to this Photoshop Forum.
I typically get responses back from other Adobe forum promptly.
Chime in.

The Adobe engineering folks DO duck in here from time to time - and that's a BLESSING! Please name any other big company where you get to interact with the engineers AT ALL. I can't. But I suspect the engineers actually have a lot oof real work to do, and their time here is necessarily limited.
Your comments are more along the line of "I pay a huge amount, for that I expect better support". These are very valid comments. But reality is different from what we may expect, and this forum is not the place to expect Adobe support participation AT ALL. In fact, the technical support people at Adobe often direct users to come here (something I've always found amusing).
At the higher level, Adobe may simply not be spending enough on support for literally millions of users. Is is greed or smart business to try to minimize support cost? That's up for individuals to decide.
I suggest you write a snail-mail letter to the Adobe president if you're not getting the support you need.
-Noel

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have a mac pro and the light on my power cord is orange. what is wrong with my computer and how do i fix it?

The light on my power cord is orange. What is wrong with it and how can I fix my computer?

You have a Macbook Pro. A Mac Pro is a desktop. The light on your power cord is orange when it's charging. It turns green once it's fully charged.
Matt

What is wrong with my phone if the battery life is draining while the phone is in the lock position?

Last night my phone just started getting extremely dim and I had it on the brightest setting. It was so dim you had to look at it under a light just to see what was on the screen. It then proceeded to lock down. I plugged it in but it would not charge. Finally, after almost an hour of being plugged in it finally started charging. It is acting completely normal except that it is constantly warm and the battery life keeps draining even when it is not in use. Does anyone know what is wrong with it? Can it be fixed? Normally, how much would this cost me? Your help would be greatly appreciated!!

Your phone is probably broken.

What is wrong with my Firefox and Safari?

Hi all,
Since one of the recent software updates (Nov/Dec time) my Firefox has been left pretty useless as it takes AGES to load and then AGES to display a web site.. Anyone else having this issue??
Also, Safari is generally pretty good but is crap with hotmail most of the time. I can't reach my inbox unless I reset the cache each time.. Highly annoying... But bearable... It's the Firefox issue that is bugging me the most.

I think it might be my 'Firebug' web developer plugin that is causing the Firefox issue - when I disable it things run slighlty better. Still takes ages to load initially, though...

Recently my ipod touch (old version ) was not working correctly, so i deleted everything from it---expecting to start fresh, however when i start it up it continues to stay on the apple screen, what is wrong with my ipod and how can i fix it ?

my ipod doesn't allow me to do the thiings it used to. It would change the time and date and everytime i'd turn it to the correct date it would go back when i clicked a new app. it wouldn't load apps corectly because of this date and time problem. So i decided to erase everything and start fresh. But now it won't even load properly it just stays on the apple screen with the loading spin thing stuck. someone please guide me into fixing this problem

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I just got a Macbook Pro three weeks ago, and it is already freezing up on me. What is wrong with it? Also, the battery life does not extend to 7 hours when connected to the internet. Is there something wrong with my computer, or is this normal?

It's also really slow. And the mouse key on my screen sometimes doesn't switch back to normal.
Do I have a virius? How do I know if I do? How do I get rid of it? Are there any free anti virius systems that are available and good?

I doubt you will have any virus, must never say never
Free for Home use
Sophos
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition.aspx
also free from app store Clam XAV
http://www.usatoday.com/story/tech/columnist/komando/2013/02/14/tech-myths-mac-s oftware-megapixels-camera/1910521/
Your Battery will not last long if you keep it on full brightness.
see this read
https://discussions.apple.com/thread/964075?start=0&tstart=0
http://support.apple.com/kb/PH3738
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Battery%2095%25
Open LaunchPad/Other/Activity Monitor/CPU
and check if any of your processes are high% CPU if so select it and press the Red Quit process Button
Mac101 may assist you
http://www.apple.com/support/macbasics/

What's wrong with my screen and how do I fix it? My iphone 4 froze so I reset it. After it turned back on I found that the screen ( the backlight, i assume) was flickering a lot at the edges.

I went to settings and turned down all the brightness and the flickering disappeared but as soon as I turned it back up it started flickering again so I decided to reset my iphone again. After the iPhone (4) turned back on I tried pulling the brightness up again, now I can see faint vertical lines up and down the screen ( like a grid) and turning up the brightness still results in more flickering. Also, as I type this, the keyboard on my iphone is slow to recognize touch. Before it froze I had been watching a 2 hr documentary on YouTube. Did it freeze because I used the phone too much? And my iphone was on the settings app when it froze. How do I fix the flickering (and is it going to cause more damage?) and how can I make the iPhone more responsive (faster) to touch? Your help is appreciated. (Everybody hates a slow keyboard)

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

What is wrong with my display and macbook pro?

When my MacBook Pro awakes from sleep there is something wrong with the screen. It doesn't load completely and sometimes it doesn't load at all. I posted a video here to better describe what the problem is. How can I fix this?? It is annoying when I have to power off my computer almost everytime it awakes from sleep.
http://youtu.be/l049QlxZmOU

That almost seems like the kernel panic is having a panic...when you can, go to Software Update and update to 10.7.4. It may fix your issue.

What is wrong with this website? The client is being VERY vague

I'm kind of annoyed because whenever I call him, he just says something is wrong with it but won't say EXACTLY what. This is my first project, so it isn't going to be great, which is probably why the first guy is a minecraft server host. You gotta start somewhere though, and at least I get paid. There is something that is a bit off, but I don't know what it is, and neither does the guy... Have any feedback? The blank spot in the middle for the home page is an embedded YouTube video of their server and the blank tiles below show live server status for each server, but they didn't show up in the picture.

You mentioned server status being on the website which probably means you need to send some sort of message of reliability, I'm not really seeing that here.
The whole site doesn't look very modern - and maybe that's the point, with it being for MineCraft - but if so the MineCraft card has been over played here.
I'd lose a lot of the gunge, the shadows and lighting effects/filters & use more solid, less in your face colours - the yellow and green you have chosen really don't go.
Generally use the MineCraft visual language much more sparsely. To finish on a positive I like the layout, keep that.
Like you said, it's a first go - in that case it's class. My first was certainly a lot worse than this, mostly everything just needs dialing down. Stay away from filters and effects and just concentrate on the layout, the typography, using the right colour, etc. at first.
Hope this helps,
Charles

Path palette: What's wrong with "path share" and "path exclude"?

Hi everybody. First of all: Sorry for my english, but I hope someone can understanding me.
Well, I want to work with Fireworks in the future because I think that this programm keep in some situation more efficience as Photoshop... So I was trying to learn how this programm is working.
Since some days I make some experiments with Path's, because I like to work with Illustrator as well. But now, I am still going crazy because I don't understanding 2 options. I don't know the english names but In the path palette does they have this Icons:
The first option (Pfade teilen) is "path share" and the second one (Pfade ausschließen) is free translate "path exclude"
My question is: When I can use this 2 Options? I really did everything but nothing was working

Thanks for posting about this issue! I've taken a look at the "Combine Paths" operations in the Paths panel in both Fireworks CS6 and CS5 on my Mac, and noticed several bugs. Between you and I, here's a summary of what we've found:
Fireworks CS6, Version 12.0.0.236, WIN, 7, 64 Bit, SP 1
Exclude Paths - Does not work.
Fireworks CS6, Version 12.0.0.236, Mac OS 10.6.8 (Snow Leopard)
Divide Paths - No effect on rectangles.
Exclude Paths - Requires 2 clicks for rectangles - one to ungroup rectangles and another to apply path operation.
Fireworks CS5, Version 11.1.0.205, Mac OS 10.6.8 (Snow Leopard)
Divide Paths - Works like Exclude Paths.
Undo - Deletes previous unrelated non-path operation. For example:
Draw two ellipses.
Draw a rectangle.
Select two ellipses and apply Combine Paths operation.
Undo (Command-Z).
The rectangle disappears!
You can submit a bug report to Adobe about the "Exclude Paths" issue, and include the URL for this discussion within your report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
In the meantime, I'm going to send an e-mail to the developer about these issues. I know that he's working on a fix for another problem with this panel and planning on releasing a fix at some point, so hopefully these issues can get fixed as well.
Again, thanks for being so persistent. It is challenging to understand your writing at times; however, the animated GIF was very helpful—and very well done. Have you tried composing your posts in your native language and then using something like Google Translate to convert it to English? I don't know if the results would be better; it's just an idea.

What's wrong with LR5 Slideshow and the time it takes to render a 900 image show?

Similar Messages

Maybe you are looking for