What's wrong with my Aridrop settings?

I select a picture, select airdrop and I see my son. I select my son, my wife gets the picture and it says that my daughter sent it. What's wrong with my Airdrop settings?

Do you all use the same Apple ID?
~Lyssa

Similar Messages

What is wrong with my network settings?

I just can't update my ios (4.3.3). it says that " the iPhone software update server could not be contacted; make sure your network settings are correct...." can anyone come up with a solution?? thanks (I use iPhone 4g)

No it was/is not. Is it something wrong with the APN or the Username??.. Or with the VPN?? will reset settings help this problem?? Thanks btw :)

What is wrong with my playback settings?

My sequence and clip playback shows some screwed up colors with noise everywhere, but after I export it the footage looks fine. Any ideas? This is standard NTSC DV footage from a Canon GL2.
http://img.skitch.com/20091026-f13u2u313w5knwef6kxr1iq44f.jpg

Perhaps when you copied the media across the files became corrupted. It happens.
Do you have access to the original media files on the other computer? You might have to copy them over again.
Oh, FWIW, I also have never seen anything like this. It looks like a corrupt file somewhere, but I'm not saying it isn't something else. I'm guessing basically.

HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying. The email will sit in my outbox and then at some point will send. It sometimes takes days. What is wrong with my settings?

When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying. The email will then sit in my outbox. At some point it will send but it is hardly dependable. What is wrong with my settings?

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

What is wrong with camera settings -can't get it out of X-ray view

What is wrong with camera settings -can't get it out of X-ray view

It sounds like you are using Photo Booth and not the actual camera app. If you are using Photo Booth - tap the little icon in the lower left corner of the app to return to all of the different effects. Or quit Photo Booth and launch the camera app.
To quit Photo Booth...
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

What's wrong with this function

What's wrong with this Function(PL/SQL) in this formaula column definition in Reports 6i
function currdateFormula return Date is
curr_date date;
begin
select to_char(sysdate, 'DD-MM-YYYY') into curr_date from dual;
return(curr_date);
end;
I get the following error in compiling
REP-1401. 'currdateformula'.Fatal PL/SQL error occured. ORA-01843 not a valid month.
The SQL select to_char(sysdate, 'DD-MM-YYYY') from dual; worked well in SQL Plus prompt.
I got a clean compile when i use just sysdate in the function (see below).
function currdateFormula return Date is
curr_date date;
begin
select sysdate into curr_date from dual;
return(curr_date);
end;
Appreciate your help
Raja Lakshmi

hello,
what you are trying to do :
fetch the current date and return it as the result of the formula-column.
what you are actually doing :
fetch the current date, convert it to text, assign this text to a date-variable which causes an implicit type-conversion.
in your case you create a date-string with the format dd-mm-yyyy. the implicit conversion then tries to convert this string back to date using the NLS settings of your session. depending on your NLS_LANG and NLS_DATE_FORMAT this might work, if your session-date-format is dd-mm-yyyy which obviously it is NOT as you get the error.
what you should do :
select sysdate into curr_date from dual;
this fetches the sysdate and stores it in your date-variable. there is no type conversion needed what so ever.
regards,
the oracle reports team

What's wrong with my iPhone 5c?

Last night I was on my phone until it died. It was working perfectly fine as usual. Then this morning when I went to charge it, it turned on, but the screen looked distorted and the touch was not working. The only thing I can do is turn it on and off. I took it to an iPhone repair place to see what was wrong and if it can be fixed. The guy checked it out to see if there was any type of damage to it, which there was none. He then tried to put a different screen on it but the screens he tried also were distorted and the touch did not work. Since it couldn't be fixed, I went back home and tried to plug it into my iTunes account on my computer to see if I can somehow try to fix it from my computer by restoring it or something else. However, when I plugged it into my computer, it says that iTunes cannot connect to my iPhone because it is locked with a passcode. I don't even have a passcode on my phone. I have no idea what has happened to my phone. I have had it for about 9 months and never had an issue with it before. If anyone can help me out or at least give me an idea of what is wrong with it, that would be greatly appreciated. Thanks

Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If you try restoring from a backup and that doesn't fix the problem, try restoring to factory settings and, if the problem goes away, then synching your apps. You'll lose the app data and settings, but if the problem is due to a corrupt cache or settings file, that should cure it.
If none of that helps, your device may have developed a hardware fault and will need to be take or sent to Apple.
Regards.

What is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.

what is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

What is wrong with my app store?

What is wrong with my app store? I am trying to update my apps and purchase a new one but it is not working on my iPad. It is working on my iPhone 4 though.
I have tried turning my iPad off then on, I have tried re booting it by holding the 2 buttons at once, don't know what else to do. I have even gone in through the general settings and logged out of my apple ID then logged back in. This is annoying. I just want to buy an app!!!

The App store appears to be having issues right now.
Stedman

What's wrong with my device? It does not allow me to make calls with Skype or Viber... Can someone help?

What's wrong with my device? It does not allow me to make calls with Skype or Viber... Can someone help?

My device is a Blackberry Z30. Skype and Viber just to work fine. I had to travel abroad and turn off data services while traveling outside of the US but the applications worked just fine with Wi-Fi. Suddenly they stopped working to make calls. I can still send text messages, but when I try to do a voice or video call (in the case of skype), it only says "failed call" and when I try to call using Viber I get an error message that says the I can not use the application until I complete my GMS call which is ridiculous because I'm not using the phone other than trying to place my call through Viber. The interesting thing is that when I go the permission page in my security settings everything indicates that its on but is gray out and I do not have access to change any setting. The same in both applications. The rest of the applications are accessible to change settings. I already uninstalled skype and reinstalled it and still the same problem. I'm ready to back up everything and wipe out the device to original settings.

What's wrong with my ipad2? I just can't bear it always restart again and again when I just play a simple game!

What's wrong with my ipad2? I just can't bear it always restart again and again when I just play a simple game! What's wrong with the apple without Jobs?!

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.

What's wrong with my store procedure?

HI, I can't figure out what's wrong with my stored procedure. I believe i have a "commit;" where it's not supposed to be. What i really want to acheive is save the record once it finds those keywords. Maybe my syntax is all wrong.
I am getting the following error msg. PLS-00103
create or replace
procedure sp_diag is
DECLARE
v_setting_key NUMBER(18);
v_parent NUMBER(22);
v_name VARCHAR2(100);
v_class_key NUMBER(22);
CURSOR c1 IS
select setting_key, setting_class_key,name
from cms2wire.setting_list;
CURSOR c2 IS
select setting_class_key, parent_class_key,name
from cms2wire.setting_class
where setting_class_key = v_parent;
BEGIN
OPEN c1;
LOOP
FETCH c1 into v_setting_key, v_parent, v_name;
EXIT when c1%NOTFOUND;
WHILE v_parent != null
LOOP
OPEN c2;
FETCH c2 into v_class_key, v_parent, v_name;
CLOSE c2;
IF v_name='Diag.'or v_name='Settings.' THEN
COMMIT;
END IF;
END LOOP;
END LOOP;
CLOSE c1;
END;
-------------------------------------------------------------------------------------

Now, the way I see it, if you want to save the information, then you need to put it some place, so your slow-by-slow stored procedure becomes something like
INSERT INTO some_table (column list)
SELECT a.setting_key,
         a.setting_class_key,
         a.name
         b.setting_class_key,
         b.parent_class_key,
         b.name
    FROM cms2wire.setting_list a,
         cms2wire.setting_class b
   WHERE a.setting_class_key = a.setting_class_key
     AND b.name in ('Diag.', 'Settings.');
COMMIT;does it not?

What's wrong with my Aridrop settings?

Similar Messages

Maybe you are looking for