What`s wrong with my Bootcamp when I use FileValut in Lion

I don`t know what happens with the new FileValut?Now,if I install Bootcamp drivers(I have tired every version I could find) in Win7,it will be crashed atfer reboot.Then Win7 will crash(Blue Screen) again and again .The only thing I can do to stop this is enter the safe mode and uninstall Bootcamp.I doubt that it may cause by the built-in time verification program because it have to visit Lion`s partitition to get time information but File Valut prevents it.
Then I just want to know how to solve the problem.I need both FileValut and Bootcamp.Is there any solution or I have to wait until Apple fix the bug ?

Yes my Iphone has done the same thing!!! I was listning to music then it just stopped.
There is no sound coming from it what so ever!!!! I have tried eveything, i actually work for a mobile company and i on Ipone support and i know all the tricks but nothing has worked!!! Not happy at all!! Restoring to new dose nothing, the same as when i put it in to safe mode?????????

Similar Messages

TS1372 does anybody know what is wrong with the ipod when error 1437 is reported during the restore mode?

does anybody know what is wrong with the ipod when error 1437 is reportedduring the restore cycle?

Double check the connections on each end to make sure they are nice and snug. If possible, plug the Nano into another existing USB 2.0 port.
Also, with the iPod still connected, try resetting it. To do this, press and hold both the Select (Center) and Menu buttons (or the Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear.
Then try restoring the iPod again.
B-rock

I bought 120 gold in Haypi dragon on Mar 12 and 15 2012 , but I havenot received them yet.What is wrong with it ,and when i can reveive them ?

I bought 120 gold in Haypi dragon on Mar 12 and 15 2012 , but I havenot received them yet.What is wrong with it ,and when i can reveive them ?

For in-app purchases you should contact the developer's customer support, assuming there is one.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

For our ELVIS II units, I receive error message -200220. What is wrong with these units when they worked a month ago?

On several computer stations, we receive the error message -200220 when selecting any instrument on the Instrument Launcher when the Run option is pressed. This message has not been cleared after the computer was rebooted and the Box power cycled. What is wrong?
I can not find this error code in the product documentation.
Solved!
Go to Solution.
Attachments:
Elvis_Error_Message[1].docx ‏464 KB

From the screenshot you attached, it looks like there is no device specified on the front panel, which means that the error you see is correct, the device identifier is invalid. Are there any available devices populated in the Device control? Does your ELVIS II show up as connected in Measurement and Automation Explorer (MAX)?
Donovan

TS1440 Clicking sounds. No entry on start up. Slow. Error code 36. Finally question mark folder. I don't understand what's wrong with the thing I barely use it. Can you help?

Iv been having multiple issues with my mac. This comes as a surprise as I rarely use it.
Symptoms-
Clicking noises
Slow
Unresponsive
(Error code 36)
Question mark folder
I used single user mode to try and repair the disk through utilities but the option wasn't available. I then verified the disk and it came up with few error messages
-invalid leaf record count
-invalid directory item
-found corrupt and needs to be repaired
Unfortunately I don't have an instillation disk, I didn't get one when I bought the computer. I don't know what else to do.

If the Mac is running v10.7 Lion or v10.8 Mountain Lion ..
Startup your Mac while holding down the Command + R keys so you can access the built in utilities in OS X Recovery
From there you can repair the startup disk.

What is wrong with my ipod when it charges for 2 minutes then stops charging and switches back and forth

I plug it in then it wont charge then my sister plugs hers and and hers charges

Do you have a power adapter? Sometimes iPod doesn't charge in computer when the battery is extremely low. That happened to me. Luckily, I had a power adapter. Now it works as usual. Hope can be of help!

What is wrong with my eMac when it......

....loses power and can be restarted only by setting the P-Ram?
This has happened three times now (twice in the last 2 weeks). The screen just goes black, then I have to start up by setting the P-Ram and it's fine (for awhile). I have had new capacitors so it should not be that.
I'm trying to decide what the issue is and whether it should be repaired...or whether I should get a new computer.

Hey Janice,
Sorry to hear your problem is still ongoing.
JMVP is correct you should check the battery. If you can't check it take it to a local electronics place and have them check it. Radio Shack will be happy to do it since if it's dead they will sell you another for$16.99 it's here:
http://www.radioshack.com/product/index.jsp?productId=2104707&cp
Otherwise it's $4.99 from OWC,
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
I replace them if I get this kind of squirrely behavior.
This is from the repair manual:
"4. Disconnect the keyboard, mouse, and all other peripherals (such as speakers).
5. Position the computer face down, so it rests on the CRT. (on a bog soft towel)
6. Remove the user access door.
7 Touch a metal surface inside the computer to ground yourself. (That big plate on the bottom of the computer is a good place)
8 Unplug the computer.
9 Verify the battery is good. A drained battery may be indicative of a crashed Power Management Unit. Does the battery measure at least +3.5v (actually I replace them at 3.58. New ones from OWC measure 3.65-3.72 V)? If not, replace the battery and reset the PMU (see next step).
10. Reset PMU (circled below). (you can see the PMU button it's on the other side away from the battery, looking through the RAM door. Press it ONLY ONCE!)
Note:
On newer models the PMU may be hidden by the optical power cable
(see second graphic below). For information on resetting the PMU refer to “How to Reset the PMU on the Logic Board” mentioned earlier in this chapter. Start at step 7 in the PMU procedure. If resetting the PMU doesn’t solve the problem, go on to the next step."
Try those and see if it helps.
Next is the down converter.
You should buy a hard drive of sufficient size to backup everything you have on your computer. I have clients doing that to multiple drives.
I have one client who's a designer that was backing up to CD/DVDs only to look at them and realize the silver stuff was flaking off.
Richard

What is wrong with my Ipod when it turns on but, only goes till you see the apple and than turns off

My Ipod gen. 4 flashes the apple on and off. My Itunes account doesn't see I have my Ipod on the USB.What can I do to fix it? What is my issues?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What is wrong with apple tv when the blue light flashes quickly

I am having trouble with my apple tv device. The blue light flashes continuously and will not reset at all.

Welcome to the Apple Community.
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.

What's wrong with my phone when someone calls me I can hear them but they can't hear me??

If anyone can please help me SOS

Hi Salvibambina,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
I hope this information helps ....
Have a great day!
- Judy

What to do with Time Capsule when not using for Wireless Internet

I previously connected my Time Capsule to my fiber optic router but in my no home this is no longer needed as the cable TV company now provides 160 MPS Internet in a router that contains a wireless router built in. It works fine. My computer is now connected wirelessly to that router (too far to take advantage of the wired connection).
Therefore I want my Time Capsule to just be connected to the computer for backups. I gather I have to connect it via Lan and make sure it does not transmit r receuve wirelessly. In fact, other wireless computers in the huse occasionally try to log into the old Time Capsule PPoE settings, so I want to erase them and start fresh.
This seems to be similar to what I want t do, but I want to make sure and ask:
https://discussions.apple.com/message/8256674#8256674
If this is not correct, can someone advise.
By the way, I have a first generation Aiport Express that I hope to use with my new cable router (modem?). I assume it will work as it did with the Time Capsule. Purpose is for Airplay with an audio system.
Thanks!

Thank you for your replies. I really appreciate it.
To answer your questions in order, but first I should mention that due to work reasons, I will be away from my computer until Friday night Japan time, or Friday AM US time.
Anyway, probably better I go slowly,as I tend to get overwhelmed by technical things.
1) You said: "The TC does NOT require an Internet connection for network connectivity. You DO have to connect the TC by Ethernet to the Fiber Optic router in order for it to gain network connectivity AND to allow network clients to access it."
-->Ok, this is in reference to my Time Capsule and the previous network n myold apartment. But your next question makes me wonder:
2) "Is this Motorola device the one that replaced the Fiber Optic router that you mentioned in your original post? What is its model number? Do you have the TC connected directly to it by Ethernet?"
Ok, this is what I have:
Wall--> Cable modem with wireless (Motorola SURFboard SBG6580J Wireless Cable Modem Gateway.)
Other Room IMAC connected wirelessly to Cable Modem (no Ethenet connection to it since there is no jack and too far to run a cable (permanently--I can do for setup if needed)---> connected to TC and Time Capsule is backing up ok. Time Capsule is also not connected to the Modem
3) "Since you will only want to use the Time Capsule for Time Machine backups, I understood that you wanted to disable its wireless network. If this is still the case, the Express would need to be configured to join the wireless network provided by the Motorola wireless router."
Yes, This is what I am wondering. Do I have to connect it by LAN to the Motorola? A few times, when it was just plugged into the Wall, my Mac airport utility found but them could not connect to my Express. maybe because I did not configure it to work with the Motorola as you say.
4)
"By default the Express will broadcast its own wireless network with a network name of something like: Apple Network NNNNNN. You would need to connect to this network with your computer prior to attempting to access it with the AirPort Utility. Another option would be to temporarily connect it, by Ethernet, to the Motorola router during its setup phase. Once completed you can move it to the desired location."
Ok, this confirms what I guessed. Connecting the computer to the Expressby Lan? Is that what you mean?
I do understand the second option---connecting the Express to the Motorola.
If that is right, I can try that. Do I need to do anything other than connect it?
I will be able to try this Friday or Saturday I hope.
Once again. thanks for all your help. Really appreciate your taking the time to explain it.
paul

HT201210 I just got a new iPhone 4 and the (-1) error keeps popping up on my screen as it is restoring filmware, what's wrong with it?

I just got a new iPhone 4 and the (-1) error keeps popping up on my screen as it is restoring filmware, what's wrong with it?

when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying. The email will sit in my outbox and then at some point will send. It sometimes takes days. What is wrong with my settings?

When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying. The email will then sit in my outbox. At some point it will send but it is hardly dependable. What is wrong with my settings?

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

hi my
iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
thanks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

What`s wrong with my Bootcamp when I use FileValut in Lion

Similar Messages

Maybe you are looking for