What's wrong with my toggle button bar?

I've used one before, and I don't understand why my toggle
button bar is not showing the "active" state for the first index of
the viewStack it is linked to.
Normally, I use mainStack.selectedIndex = 0 and that
highlights the first (default) item of the view stack.
I change the viewstack with a timer, and all subsequent
states the correct button highlights, even when I have it loop
around to the first item again. It's only initially on load.
Thoughts?

Thanks, Greg.
That didn't work either, but it got me thinking. Moving it to
the end of the function that assigns the children to the view stack
finally worked:

Similar Messages

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

I did`t saw any content of the menu button, what is wrong with my system Indesign

I did`t saw any content of the menu button, what is wrong with my system Indesign

more information will help.
Try to select a frame and on the bottom of Buttons and Forms dailog box click on Covert to Button

When i touch the button of the phone while charging it, it sparkles. What is wrong with it?

When i touch the button of the phone while charging it, it sparkles.
What is wrong with it?

For your purposes? Probably nothing.
If you want Apple to service the device under warranty, it has to be done at an Apple Authorized Service Provider.
Look here: http://www.apple.com/ae/contact/
This is how you contact Apple to find out what to do.

What is wrong with my Macbook?

I dropped my macbook (2007 model) and the screen is so cracked that I can not see anything. I got a mini-dvi - vga cord and plugged it into a monitor, but when i turn it on, it just goes to the mac background, and will not show the login screen. What is wrong with it?

it's putting the monitor as second display, so the login screen (i'm guessing) is only displaying on the first—main—screen, the the one that is cracked.
restart the macbook and don't touch anything. when the background appears on the secondary monitor, you know the login screen must be up on the first monitor. so type in your username, hit TAB once, then your password.
you should be able to log in now. then follow these instructions:
(bare in mind i'm running 10.6.8)
1) press ALT+F2 to open up displays in system preferences.
2) you should be able to see a dialog open up in the secondary monitor
3) if this has a "Gather Windows" button, press it
4) if step 3) works, you should be able to switch around the main displays, or turn on mirror mode, or whatever

What is wrong with my log in display screen?

Hey There guys,
This problem started occurring right after i updated to Yosemite, which was quite a while back. Every time I turn on my computer and I get to the log in screen where I put my password, half the screen is normal and the other half is black with green lines running through it(this was the latest) other times it is white rectangles with little black ones running through them. Im not sure what is wrong with it, I never dropped my mac or anything.
I have attached an image.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/http://www.apple.com/retail/geniusbar/
 Cheers, Tom

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

What is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.

what is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

My ipod keeps restarting, what is wrong with it?

my ipod keeps restarting and deleting music, what is wrong with it?

Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

HT201559 What is wrong with my ipod?

Can anyone help me identify what is wrong with my iPod? One day I tried to unlock it, and nothing happened. The screen is semi frozen, i can still use the screen home button (my original home button is broken) but i cant unlock it or turn it off. Basically i cant do anything that requires sliding my finger across the screen. I receive notifications still, the time changes, and I get alerted right as i plug the charger in. As im writing this I have it updating the software. Im sorry I dont remember exactly what iOS it was, i know it was 8. something. And this is an iPod 5 gen.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What is wrong with mt IPod Touch 4G

I have been having a lot of problems with my Ipod touch 4G It will glitch up n start to type stuff and take over its self it will glitch up n my rdx n sometimes my tfc column will not work please help tell me what is wrong with it and how i can fix it

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What is wrong with the cloned HD?

Hi, there,
I have a G4 Sawtooth, 1.3 GHz, 1.6 GB RAM, with an ACARD ATA-100. An 80 GB HD is connected to the ATA bus of the motherboard, and an 160 GB HD to the ACARD. I cloned Mac OS 10.4.10 from the 80 GB HD to the 160 GB HD. I could boot the 160 GB cloned HD to the window when I was asked about the name and password. I used the name and password, which I have with my original HD. However, the window just shook my password off. I used the installation disc for resting password, and found there was no name or password for the cloned. Besides, the box for entering the name was obscured in gray that I could not enter a name there.
What is wrong with the clone? What should I do to make the clone HD completely bootable?
Thanks.
Robert

Inasmuch as you've provided little helpful information about how you prepped the drive and cloned it, all I can do is suggest the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

What's wrong with my browsers?

When i first got my macbook the internet was going really slow but then i changed the dns server to 4.2.2.2 and sometimes change it to 4.2.2.1 and the internet got better but now my browsers are acting funny.
One moment i'm surfing webpages with safari or firefox.... Chatting with AdiumX or MS Messenger... and suddenly it just stops... Msn is getting time-out's, Safari says I'm not connected.
But Airport sais it is still connected to my wireless network (with all the black bar's filled). It has valid IP adress etc, But everywhere I want to go on the internet it sais I'm not connected.
When I disconnect the airport en let it reconnect with my wireless network, the connection is fine.
how can i fix this?

Most users shouldn't be manually entering DNS addresses, and those DNS addresses you mention probably aren't intended for end users. Is Level3 your ISP?
That doesn't answer 'what's wrong with my browsers?', but a good start would be to configure your network according to your ISP's instructions. If you have DNS problems then, you might try using OpenDNS.

What is wrong with my Macbook Pro? (distorted screen, beeping, slow)

I have a late 2012 Macbook Pro (13-inch) that I got from Best Buy. It worked perfectly fine for a year, but then went crazy.
First, it started shutting down here and there, and icons bounced a lot in the dock. Then, one day, I googled something and it froze, then flashed a strip of multicolored barcode-like lines. So, I shut it down and it overheated then began to beep 3 times and flash a light.
I brought it in and they just wiped the hard drive. Then, it happened again while I was watching a video only a short time later. I was going to re-seat the RAM myself but the inside of the computer looked all messed up. I took it in and they gave me a new LCD but it has a dead pixel now. It worked fine for 1 month after that.
Then, I was using the laptop on my bed and it shut off randomly a couple of times while I was on Facebook and started beeping. I rebooted it and tried to fix it but it happened again the next day. I brought it back to Best Buy and they said it was hot and sold me a $20 cooling pad.
That worked for a few days, then I was watching TV online and it happened again. I brought it back to Best Buy and they replaced the RAM. Now, I was watching something online and it happened yet again. I was able to reboot and it worked okay now for a couple of hours but it did freeze again and I had to shut it down.
Everytime I go to Best Buy, they tell me "If we have this issue 1 more time, we will replace your computer." But, then, they say the same thing every time and that it's their policy. I have paid for Office now and only have 1 download left. Also, this is ridiculous because I'm a student and I've had my Mac gone for 2 weeks at a time at least 3 or 4 times. When this happens, I get stuck using my iPad and can't use flash so I've spent tons of money of apps for flash and other things to make my iPad functional.
Can somebody just tell me what's wrong with it? It "passes the hardware test" every time and the Geek Squad keeps asking me stupid questions like "Did you check your internet connection and reset your modem?" When I asked them the first time to do a PRAM test, they didn't know what that was and asked me to go on iTunes or clear my cache or something like that.
I have had a bad experience with them altogether. I got my Macbook for $500 because I had a PC before that I paid $700 for and it eventually broke. They were unable to repair that one because the hard drive had failed, although they had previously been convinced that I needed to uninstall my Norton to fix that problem.
Sorry if I'm ranting, but my Macbook is like a child to me (not to sound weird) and I'm sick of this problem. It's working fine at the moment but I know this will happen again randomly like always.

If you're able to boot, launch the Console application by entering the first few letters of its name into a Spotlight search, and select the most recent panic log under "System Diagnostic Reports." Post the contents -- the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID” and "Kernel UUID," two long strings of letters, numbers, and dashes in the header and body of the report. Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, including your login items.

What's wrong with my toggle button bar?

Similar Messages

Maybe you are looking for