What's wrong with the audio from my Apple TV?

I will occasionally rent a movie on iTunes because they are a dollar less than the same movie rental through DirecTV. Saturday night I rented and watched “The Dark Night Rises” and was disappointed in the audio portion of this movie as it played on my home theatre system. My ATV2 is connected via HDMI to my Yamaha RX-V65 receiver. My router (which is in the den) is an Apple Extreme dual-band router. Throughout the movie, the dialogue was never centered correctly, the rear channels had very little information, and the left rear speaker had some strange intermittent static noise. This was very disappointing. The following day I tested my amplifier and speaker setup with Yamaha’s in-built speaker test tones and all was well. I then played a Blue ray movie and the audio was fine, including output from the left rear speaker. BTW, while playing the movie through the ATV2, all 6 lights on the Yamaha receiver were lit up indicating all 5.1 speakers were active, but the audio was a mess!! Can anyone tell me what might be wrong? Do these movies rented from the iTunes store and played over the ATV2require a special sound field program on the Yamaha? Any help would be appreciated

if you want the peaks to stay, right click on the audio meter and choose static peaks.
Todd recorded a great video about the audio meter and mixer here:
http://www.video2brain.com/en/lessons/changes-to-the-audio-mixer-and-audio-meters-panels
this migh help.
as for the meter not moving the first few frames, i think, i can't help you.
and keep smiling

Similar Messages

What's wrong with the audio in .avi exports?

I've been trying to export a 30-second flash animation to an .avi format, but it seems like regardless of the settings I choose, the audio comes out crackly.
It's not even consistent. If I export it again with the exact same settings, it's crackly in a different place, though usually on the same two clips (one's a .wav and one's an mp3). But sometimes everything's crackly. I can't find anything wrong with the raw audio clips.
What am I missing here? Thanks in advance for your responses.

if you want the peaks to stay, right click on the audio meter and choose static peaks.
Todd recorded a great video about the audio meter and mixer here:
http://www.video2brain.com/en/lessons/changes-to-the-audio-mixer-and-audio-meters-panels
this migh help.
as for the meter not moving the first few frames, i think, i can't help you.
and keep smiling

What's wrong with the audio meter?

Let me start off by saying that I know the problem I am going to report is a little bit complicated, if my limited grasp of English makes it even harder to understand, please let me know. I'll elaborate on it further.
At first, I was very happy with the CS6 because the audeo meter at the bottom right can show the volume of video EVEN WHEN i scrub through the clip in the viewer monitor. It is vital to me,because I am so used to editing based on the fluctuance of volume as I edited on FCP .However, I find the audio meter in premiere pro is kind of wonky. when I press left arrow or right arrow to move frame by frame, the the audio meter acts very strangely...I am not sure how to discribe it in words, but I'll give it a try here:
In FCP 7,the audio meter shows the volume in a very simple way: when I play the video frame by frame, the audio meter fluctuate correspondingly, to show the volume of that individual frame.
In PP, when I try to play frame by frame, the audio meter gives no reaction in the first couple of frames, then fluctuate . The most mind boggling thing is that when I stop playing the clip, instead of staying as the volume of the frame where I stop (as FCP does), the audio meter in PP slowly falls down to nothing. What gives? Can I have an audio meter in PP acting just like the one in FCP? Can anyone give me a hint of what's going on here? Thank you in advance!!

if you want the peaks to stay, right click on the audio meter and choose static peaks.
Todd recorded a great video about the audio meter and mixer here:
http://www.video2brain.com/en/lessons/changes-to-the-audio-mixer-and-audio-meters-panels
this migh help.
as for the meter not moving the first few frames, i think, i can't help you.
and keep smiling

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

What's wrong with the wsdl

We are trying to create a proxy from the following wsdl file and getting an error message: illegal syntax: API:Parameter BINDING has initial value
The webservice that we are trying to consume is from TIBCO .
Can someone please help me to find out what's wrong with the wsdl.
<?xml version = "1.0" encoding = "UTF-8"?>

<wsdl:definitions name = "Untitled" targetNamespace = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:soap = "http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:xs = "http://www.w3.org/2001/XMLSchema">
     <wsdl:types/>
     <wsdl:service name = "TIBCO__ABAP">
          <wsdl:port binding = "tns:SOAPEventSourceBinding" name = "SOAPEventSource">
               <soap:address location = "http://192.168.9.58:10001/TIBCO_ABAP"/>
          </wsdl:port>
     </wsdl:service>
     <wsdl:portType name = "PortType">
          <wsdl:operation name = "Operation">
               <wsdl:input message = "tns:Input"/>
               <wsdl:output message = "tns:Output"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name = "SOAPEventSourceBinding" type = "tns:PortType">
          <soap:binding style = "document" transport = "http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name = "Operation">
               <soap:operation soapAction = "http://192.168.9.58:10001/TIBCO_ABAP" style = "document"/>
               <wsdl:input>
        <soap:body use="literal" />
      </wsdl:input>
               <wsdl:output>
        <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:message name = "Input">
          <wsdl:part name = "Param1" type = "xs:int"/>
          <wsdl:part name = "Param2" type = "xs:int"/>
     </wsdl:message>
     <wsdl:message name = "Output">
          <wsdl:part name = "Result" type = "xs:int"/>
     </wsdl:message>
</wsdl:definitions>

Léon Hoeneveld's response works for me. You will need to download a tool that allows you to edit the WSDL and reorder the values.
I've used a freeware tool like notepad++ collapsed all the levels and opened up the <wsdl:definitions xmlns:wsdl... segment and reordered the subgroups beneath it accordingly.
1. types
2. message
3. portType
4. binding
5. service
Thanks again Léon!

What's wrong with the server?

execute me ~what's wrong with the server? I can‘t use the command nohup any longer.Can somebody help me?
root@shhis1new # nohup
Segmentation Fault (core dumped)
root@shhis1new # nohup ls
Segmentation Fault (core dumped)
root@shhis1new # nohup /opt/SUNWexplo/bin/explorer -w all &
[1] 6871
root@shhis1new #
[1]+ Segmentation Fault (core dumped) nohup /opt/SUNWexplo/bin/explorer -w all
root@shhis1new # uname -a
SunOS shhis1new 5.9 Generic_122300-19 sun4u sparc SUNW,Netra-T12
System Configuration: Sun Microsystems sun4u Sun Fire E2900
System clock frequency: 150 MHZ
Memory size: 49152 Megabytes
Best Regards
<email address removed by moderator>
Edited by: 884082 on 2011-11-22 下午10:00

Moderator Action:
You email address has been removed from your post.
You wouldn't want bad people to send you spam messages for the rest of your life, eh?
Moderator Advice:
If this is the same E2900 that you have mentioned in every one of your other forum posts, then it would seem you need to contact Technical Support and open a proper support request. These forums are NOT techsupport and that system seems so poorly configured that it needs deep analysis. Such investigation cannot be done by using an online forum.
The immediate solution is to log on to the SC of that box and power it down, then boot it back up. At least it will be running after that.

On my Ipod touch 4g all of a sudden all my music sounds as if they were slowed down. What's wrong with my audio?

On my Ipod touch 4g all of a sudden all my music sounds as if they were slowed down. What's wrong with my audio?

You need to turn off the Zoom accessibility feature. Tap the screen twice with three fingers to get to normal screen. Then go to Settings>General>Accessibility and turn Zoom off. You can also do that by connect the computer to iTunes and going to the Summary pane for the iPod and go to Configure Universal Access.
For more info see:
iPhone and iPod touch: Home screen icons are magnified or large

I'm trying to add the system date with a Label. What is wrong with the code

import java.util.*;
import javax.swing.*;
public class CurrentDateApplet extends JApplet
     Calendar currentCalendar = Calendar.getInstance();
     JLabel dateLabel = new JLabel();
     JPanel mainPanel = new JPanel();
     int dayInteger = currentCalendar.get(Calendar.DATE);
     int monthInteger = currentCalendar.get(Calendar.MONTH)+1;
     int yearInteger = currentCalendar.get(Calendar.YEAR);
     public void init()
          mainPanel.add(dateLabel);
          setContentPane(mainPanel);
          dateLabel.append(currentCalendar.get(Calendar.HOUR) + currentCalendar.get
                    (Calendar.MINUTE);
}

As for what's wrong with the code, it would be easier if you said: it doesn't show the date (it does this instead), it doesn't compile (I get this message) etc.
Anyway I'll assume you want to display the time in a label...
dateLabel.append(currentCalendar.get(Calendar.HOUR) + currentCalendar.get
(Calendar.MINUTE);This won't compile: the parentheses are mismatched, and there is simply no such thing as append(). So we could trydateLabel.setText("" + currentCalendar.get(Calendar.HOUR) + currentCalendar.get(Calendar.MINUTE));This wroks, but looks pretty nasty and it's not how you are supposed to format dates and times. Here's the unofficial party line, nicked from one of jverd's posts:
Calculating Java dates: Take the time to learn how to create and use dates
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format
From those links you should be able to find those applicable to times like this: http://www.exampledepot.com/egs/java.text/FormatTime.html
Using this approach you would end up with something like:import java.text.Format;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.JApplet;
import javax.swing.JLabel;
import javax.swing.JPanel;
public class CurrentDateApplet extends JApplet
    private Date date;
    private JLabel timeLabel;
    private JPanel mainPanel;
    public void init()
        mainPanel = new JPanel();
        timeLabel = new JLabel();
        mainPanel.add(timeLabel);
        setContentPane(mainPanel);
        date = new Date();
        Format formatter = new SimpleDateFormat("HH:ss a");
        timeLabel.setText(formatter.format(date));
}

What is wrong with the cloned HD?

Hi, there,
I have a G4 Sawtooth, 1.3 GHz, 1.6 GB RAM, with an ACARD ATA-100. An 80 GB HD is connected to the ATA bus of the motherboard, and an 160 GB HD to the ACARD. I cloned Mac OS 10.4.10 from the 80 GB HD to the 160 GB HD. I could boot the 160 GB cloned HD to the window when I was asked about the name and password. I used the name and password, which I have with my original HD. However, the window just shook my password off. I used the installation disc for resting password, and found there was no name or password for the cloned. Besides, the box for entering the name was obscured in gray that I could not enter a name there.
What is wrong with the clone? What should I do to make the clone HD completely bootable?
Thanks.
Robert

Inasmuch as you've provided little helpful information about how you prepped the drive and cloned it, all I can do is suggest the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

What's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

what's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

You are not addressing Apple here...
This is a User to User forum...
iTunes Store: Which types of items can I buy in my country?

What's wrong with the fan of my 15 inch retina mbp?

what's wrong with the fan of my 15 inch retina mbp,when i play a big game like Batman ,the fans are so quiet and keep around 2000rpm,but the temperature of cpu is up to 80 degrees.(by the way, i have reseted the SMC for many times,but it doesn't work)

80 degrees F or 80 degrees C?

What's wrong with the code?

public void run()
try
{     for(;;)
     mgr = (RTPManager)RTPManager.newInstance();
     mgr.addSessionListener(this);
     mgr.addReceiveStreamListener(this);
     try{ /*****port1 = port2 = 29261, which port is only used in here
     localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
     destAddr = new SessionAddress(ipAddr, port2);
     }catch(Exception e)
          System.out.println(e + " 4");
     try{
     mgr.initialize(localAddr);
     }catch(Exception e)
     System.out.println(e + " 5");
     //set buffer
     bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
     if (bc != null)
     bc.setBufferLength(20);
     try{
          mgr.addTarget(destAddr);
     }catch(Exception e)
     System.out.println(e + " 2");
catch(Exception e)
     System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?

I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

What's wrong with the following code?

What's wrong with the following code?
Circle cir1;
double rad = cir1.radius

The circle Object was never instantiated.
In other words, you have set a declaring of a Circle, but it has not been created in memory yet.
You will create it using the " = new Circle( PARAMETERS_HERE ); "
Or some other method that returns a circle.

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

What's wrong with the audio from my Apple TV?

Similar Messages

Maybe you are looking for