What´s your recommendation?

I have a Cisco Aironet 350 PCI card and internet connection via a cable from an antenna on my roof. This means that I depend on the computer that has the PCI card installed to gain acces to internet, printers aso from my other computers.
I want to replace my Aironet PCI card with a "stand-alone reciever" so that I can, via a router, connect to internet and printers from all my computers without depending on one machine being switched on all the time. Can you give me some examples of what I can replace my PCI card with??

Sorry, was ment to be posted in "Getting started"...

Similar Messages

What do your recommend in Mac programs that will do what MS Publisher will

What do your recommend in Mac programs that will do what MS Publisher does, but better for less?
I am not sure where I should post general software questions so if this is not the correct one please let me know where I should post a question like this in the future.
Thanks
Martin Brossman

http://store.apple.com/us/product/MB624Z/A?mco=MTIxODk3Mw
Read the section on "Pages".

Your What are Your Recommended TextPad Embellishments

As a long-time TextPad user I've been quite impressed with the editor's amazing and powerful features and is why I have been feeling lately that the ESTK is coming up a little on the short end as I begin this journey into writing attempting to write ExtendScript /JavaScript for InDesign.
With Theunis's compiled CHM help file as an added tool available from TextPad, I may try scripting away from the ESTK, but will miss ESTK's visual enhancement of the code.
There are so many add-ons available to the TextPad user to use, and as many of you have traveled this road already; what are your recommended clip libraries, macros and syntax definitions that would be worthwhile to the aspiring InDesign script writer?
Thanks in advance for any suggestions.
Kelly
PS. Thanks to Theunis (aka Jongware) for making the CHM available to this community!

You're welcome, Kelly!
Personally, I use TextPad "as is", as it already does a great job on syntax highlighting Javascript. Actually I cannot remember if it did this natively, or if I had to download it somewhere -- have been using it for years like this. The only thing I added was a hotkey to the CHM help file (instructions to do so are in TextPad's Help on running external files).
But I'm as curious as you: does anyone else have suggestions to further enhance TextPad?
On the same: on my Mac I use TextWrangler to code. Are there any useful additions for that as well?

What is your recommendation to improve data export time - MaxL?

We have scheduled data export for backup everyday using MaxL and takes 2 hours and would like to decrease it to 30 min or less.
What is your recommendation?
1. Hot back-up
2. Parallel Calc (if possible)
3. Copy DB files on Unix box.
4. ???
Environment 9.3.0.1
Thanks in advance!
Edited by: venuramini on Jul 10, 2009 2:52 PM

CL,
I have done the following and my results are very encouraging.
With 1 ExportThreads:
0 lvl     9.40 min     2.8 GB
All lvl     123.00 min     2.8 GB
With 2 ExportThreads:
0 lvl     4.55 min     2.8 GB
All lvl     72.78 min     2.8 GB
With 3 ExportThreads:
0 lvl     3.32 min     2.8 GB
All lvl     50.5 min     2.8 GB
With 4 ExportThreads:
0 lvl     2.56 min     2.8 GB
All lvl     36.8 min     2.8 GB
Only issue with exporting 0 level data is aggregation. But it is a small inconvenience than taking long to export data that we very rarely need.
Venu

Hi All, I have been using the adobe CS 5.1. What do you recommend upgrade my CS? or get the subscription on a yearly basis, thanks in advance for your input here,

hi All, I have been using the adobe CS 5.1. What do you recommend upgrade my CS? or get the subscription on a yearly basis, thanks in advance for your input here

The decision is ultimately yours. You have to consider your preferences and reasons for use.
If you are using the software primarily for personal projects, then have a suite might be all you need, and the one you have now might suffice for that as well. If you are a professional who needs to be on the cutting edge, then you probably want to have the subscription working for you.
Upgrading to a new CS means getting CS6, which is likely to be that last of the CS releases. If you do that you pay for it one time and what you get when you pay is what you will have until it becomes obsolete somewhere off in the future, except for any corrective updates that might be provided. It should hold up to be useful for some number of years.
If you purchase a Cloud plan, you pay for it repeatedly over time - basically a monthly fee - but you get updates and new features as they are released. There is always a chance that newer updates could eventually out-spec the machine you own, requiring a hardware update to continue on with new releases.

I have used your recommended method over and over and over without success. what am i doing wrong????

I just cannot seem to create a desktop shortcut using your recommended method.

Not sure what method you are following or what you are actually trying to do.
If you wish to create a shortcut to a site and have Firefox open:<br /> Drag the tab to the desktop, but do that by dragging the icon on the end of the location bar, not the tab itself. Dragging the tab is used to repossition the tab on the tab bar or to move it to a new Firefox window.

Thinking about getting a new iMac to use as the main computer. Has anyone done this? What is your experience and recommendations?

We have a 2009 MBP, 2010 MBP, 2011 MBA, an IPAD 2, and several ipods. Currently, my 2009 MBP is the main computer, holding all the music and pictures. This has used up the majority of the available storage and definitely slows it down some. I do back up the full computer to a backup drive and also remove the large movie files to another external drive. I'm thinking about getting a new iMac to use as the main computer. Has anyone done this? What is your experience and recommendations?
I look forward to all responses.
Thanks,
Brad

Thanks for your response. I look forward to hopefully learning something new here.
A good share of my music was added via my CDs, but now everything is added via itunes and occasionally amazon. Almost all my pictures and video are added through my cameras via iphoto although I have added some with the 'add image to iphoto library' function also.

Is there a risk of setting a console connection timeout and what is the recommended setting?

Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

Hi Henrik
depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
it realy depends how secure is your space and how much security you need.
and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
HTH
Patrick

What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

Hello,
I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
Any suggestions would be appreciated.
Thanks.
Daniel Madill

Hello,
The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
I hope this helps!
Steven T.

Why is the sound of my new ipad cutting out intermittently and what does Apple recommend to solve the problem in lieu of any updates?

Why is the sound of my new ipad cutting out intermittently and what does Apple recommend to solve the problem in lieu of any updates? All of a sudden without changing any settings, the audio on my NEW ipad cuts in and out on applications/ games, keypad noise and lock sounds. The rocker button only seems to work while the sound is intermittently being heard before, after a few seconds of noise not doing anything when sound goes off.
This is highly frustrating as I've noticed others posting about such issues as far back as April. Anybody had the same thing happen to them? Is this likely software (ios6) or hardware issue? What are the solutions Apple???

Apple has no physical stores of their own in Dubai, so unless you mean that you purchased from the online Apple Store for the UAE, you purchased from a dealer, who may or may not have been authorized. You can check the expiration date of the warranty on your iPad yourself by entering in the serial number here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If it does indeed show the warranty has expired, then what you need to do from here will depend on who you purchased the iPad from and when you really did purchase it. Perhaps you actually purchased it in August and are just misremembering? Check your receipt. If you confirm that you did purchase within the last calendar year, tell us exactly where you got it and we can probably offer advice.
Regards.

What is the recommended way for persisting JMS messages?

What is the recommended way for persisting JMS messages?. As per the IMQ admin documentation , using the default built-in persistence type which is through unix flat files is much efficient and faster, compared to the database persistence .
Tried setting up the jdbc stuff for database persistence on iAS 6.5 . I am getting the following
error .
[24/Apr/2002:16:09:20 PDT] [B1060]: Loading persistent data...
[24/Apr/2002:16:09:21 PDT] Using plugged in persistent store: database connection
url=jdbc:oracle:thin:@dbatool.mygazoo.com:1521:qa1 brokerid=ias01
[24/Apr/2002:16:09:23 PDT] [B1039]: Broker "jmqbroker" ready.
[24/Apr/2002:16:11:56 PDT] ERROR [B4012]: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
[24/Apr/2002:16:11:56 PDT] WARNING [B2009]: Creation of consumer SM_Response to destination 1
failed:com.sun.messaging.jmq.jmsserver.util.BrokerException: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
Any thoughts?

From the output, you are using imq 2.0. In that release
the key used to persist a durable subscriber in the database
table has a limit of 100 characters. The output shows that
your value is:
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Res
ponse%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0Ais
Readonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_R
esponse%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
which is much longer than 100 characters.
You might want to shorten the string you use for the
durable name.
And yes, the default file-based persistence store is
more efficient when compared to the plugged-in persistence
through a database.

What is the recommended way of connecting to repository out of WebDAV, RMI, JNDI and JCA connector ?

What is the recommended way of connecting to repository out of WebDAV, RMI, JNDI, and JCA connector possibilities provided by CQ 5.5?

Hi dp_adusumalli,
I recognized your list of ~8 questions you posted at around the same time, as I received that same list in our customer implementation from Arif A., from the India team, visiting San Jose. :-)
I provided him feedback for most of the questions, so please check back with Arif for that info.
For this particular question, can you provide specifics for the types of interactions you are interested in?
Understanding the kinds of things you need to achieve will help determine which of the CQ/CRX interfaces is best suited for the task(s).
I've collated a few points on this subject on this page:
Manipulating the Adobe WEM/CQ JCR
Regards,
Paul

What's the recommended guideline on backing up a recovery catalog?

while I understand "Benefits of Using the Recovery Catalog as the RMAN Repository" as stated in
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmquick.htm#442214
as well as things to take note if using control file as the sole rman repository,
as stated in "Monitoring the Overwriting of Control File Records" in http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmrepos.htm#446924
I do not understand why in Backup and Recovery Advanced User's Guide
http://download.oracle.com/docs/cd/B14117_01/server.101/b10734/rcmrepos.htm
"Back Up the Recovery Catalog Often"
Even if you have to restore the recovery catalog database using a control file autobackup, you can then use the full record of backups in your restored recovery catalog database to restore the target database without using a control file autobackup for the target database.
=>probably implies that we can use another recovery catalog let's call it backupbackup to restore the recovery catalog
"Choosing the Appropriate Method for Physical Backups"
Follow these guidelines when developing an RMAN backup strategy for the recovery catalog database:
* Run the recovery catalog database in ARCHIVELOG mode so that you can do point-in-time recovery if needed.
* Set the retention policy to a REDUNDANCY value greater than 1.
* Back up the database onto two separate media (for example, disk and tape).
* Run BACKUP DATABASE PLUS ARCHIVELOG at regular intervals, to a media manager if available, or just to disk.
* Do not use another recovery catalog as the repository for the backups.=> this contradicts the previous statement
* Configure the control file autobackup feature to ON.
so may I know what's the recommended guideline on backing up a recovery catalog? should we use another recovery catalog to keep the rman repositories of the the main primary catalog or just use a control file autobackup feature?
thanks

I understand the question and the confusion.
Please note, however, that this forum is for discussing problems and errors with the documentation in general. Your question is related to a specific product and is, as far as I can tell, not a note about a documentation error or a correction.
The appropriate place to discuss this is the Database (General) forum or - perhaps surprisingly - the RMAN forum. These can both be found by
1) Clicking on the 'Forum Home' link at the top of this page;
2) Scrolling down to the category 'Database' (a category is identified by a special row format that does not list the number of topics)
3) Expanding the category by clicking on the 'More ...' link.
4) Scrolling down to the "Database - General" or "Recovery Manager" forum and clicking on it's link.
Note that forums have a search function that may be used to find answers if someone has already asked a similar question.

I want to use Bento 2 as a personal knowledge database, can your recommend

I want to use Bento 2 as a personal knowledge database, can your recommend any templets that would be useful for this to get me going?
Thanks
Martin Brossman

What I mean by a personal knowledge base is a database for new things I learn that I think I will use in the future and may forget. For example: Technical tips about my new Mac, Websites that solve certain solutions, approaches for dealing with specific business situations, stats and numbers on things that do not change fast but. I have a learning challenge where learning proper nouns is difficult so I will remember the concept or idea but not the details that I need. I use to have a old DOS program that did this in filemaker.
Thanks for asking and does that give you more clarity on what I want?

My organization is looking to invest ipads for the employees to perform everyday tasks. just wondering what would apples recommendation be for as far as apps and method of distribution would be?

my organization is looking to invest ipads for the employees to perform everyday tasks. just wondering what would apples recommendation be for as far as apps and method of distribution would be?

Use VPP. Select an MDM. Read the google doc below.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
   business site is:
   http://www.apple.com/lae/ipad/business/resources/
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0
Educational institutions in the USA can use the App Store Volume Purchase Program (VPP) to buy Apps.
https://support.assistiveware.com/index.php?pg=kb.page&id=54
There are three ownership models:
    *     Personal
    *     Institution
    *     Layered. combines personal & institution.
Watch this apple video on layered ownership. It education based, but that's OK.
http://www.apple.com/education/resources/videos/#ios-layered-ownership
More ways to transfer files and access Word documents:
https://discussions.apple.com/thread/4044866?tstart=0
All of the "Office" document editing applications on the iPad have limitations. Best try them out to see if they meet your needs.
iWork by Apple
    * Keynote
    * Numbers
    * Pages
DocsToGo
• VIEW/EDIT/CREATE Word & Excel files(Office 2007/2008/2010)
• VIEW PowerPoint, PDF, iWork, Text, .RTF, and more!
• Send & receive attached supported documents using the built-in Mail app
• FREE desktop application with your purchase! Compatible on Win & Mac allows you 2-way file sync with a WIFI connection.
• Open & Edit files within DocsToGo from any 3rd party app that supports the “Open In” feature
• Supports iTunes File Sharing via USB cable for manually moving files
https://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
Office² HD
"Office² HD, the most intuitive and straightforward office document editor available on the iPad, makes it easy to open, view, create and edit Word (DOC & DOCX), Excel (XLS & XLSX), and PowerPoint (PPT & PPTX) files right from your iPad!"
https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Quickoffice Pro HD
Create and edit ALL Microsoft® Office -- document, spreadsheet, and presentation formats, as well as view PDF files, on the go. Our advanced file manager lets you manage local files, access Google Drive or other cloud accounts, and works with your iPad email attachments so you can work anywhere, anytime - online and offline.
https://itunes.apple.com/us/app/quickoffice-pro-hd-edit-office/id376212724?mt=8
nsdjoey presents ways to edit office documents in this web page:
https://discussions.apple.com/message/21953221#21953221

What´s your recommendation?

Similar Messages

Maybe you are looking for