What SATA hard drive(s) would one recommend for a G4 Sawtooth?

I plan to replace the main IDE/ATA/PATA hard drive on a 400 MHz G4 Sawtooth.
What SATA hard drive(s) would one recommend for this system? The recommendation can be regarding brands in general or a particular model.
Thank you.
-John

This feature ONLY comes into play on a Drive that has developed Bad Blocks that have not yet been corrected by re-writing the data.
What happens when you attempt to Read data from a Bad Block on a drive without that feature, the drive will Retry, and retry, and retry, in an attempt to get data that is good enough that the drive's error-correction logic can correct it. This can take so long that the RAID driver declares the drive as inaccessible, and splits the RAID into a functioning and a non-functioning unit, and declares the RAID compromised* ( that's not the word they use, but the correct term escapes me at the moment.)
Drives with Bad Blocks are more likely to develop more Bad Blocks and fail later.

Similar Messages

I would like to transfer my iTunes and photos etc from my PC to my new iMac via a external hard drive. Would somebody recommend one. I read that the Western Digital Mybook Essential 3.0 is good.

I would like to transfer my iTunes and photos etc from my PC to my new iMac via a external hard drive. Would somebody recommend one. I read that the Western Digital Mybook Essential 3.0 is good. Though as Mac has 2.0 is this fast enough? I am a basic user, surfing only.

If you plan on using the WD with the Mac after the iTunes transfer I would strongly recommend against WD. WD external HD's tend to be the most troublesome with Macs. If you intend to use the drive for backup using Time Machine or creating a bootable clone then I'd recommend a higher quality drive than WD. The drives I'd recommend in that case would be:
OWC Mercury Elite Pro series
LaCie d2 Quadra series
G-Tech G-DRIVE series
These are all high quality drives and enclosures with similar features. Personally I use the LaCie's however I would be happy to have OWC and G-Tech on my desk too. FWIW I've been using the LaCie's for 4 years and have 4 of them, all work perfectly and have never given me any trouble.
You also my find this article helpful: Move an iTunes library from a PC to Mac (and back)

I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3??

I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3?? That seems to be just about all I can find out there, so far. Are those drives compatable with this macine? thx

SATA II

HT201250 Can I partition my external hard drive and use one partion for time machine and the other one for data that i may want to use in different computers?

I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
May half and half, 1.5 tb for time machine and 1.5 tb for data.
I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
Any recommendation?

As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

What external hard drive to you recommend to free up space on an old Macbook Pro?

My Macbook Pro is approx. 5 years old. I have since gotten an imac, however would like to use my old Creative Suite 2 on the macbook. When I updated it to "Lion" - it denied access to my creative suite apps. I have since contacted Adobe, and they have given me a solution to get it up and running again, however, my startup disk is just about FULL. Therefore I can't upgrade or really even open more than one app without getting the warning pop up about getting rid of some files asap or risk malfunction of the laptop.
What external hard drive do you recommend to get the most bang for my buck in terms of offloading a massive amount of photos to in order to be able to use the laptop again?

Your picture folder would have to be 10 times larger and then it would be close to 1 TB in size. I have an aphorism, 'one cannot have too much storage'. If the bank account can afford it, follow Ralph's advice and do go for the larger storage drive. Given enough time, you might just grow into it..
Now there is an issue that you should consider. Since these pictures will no longer be on your MBP, do you want to have them backed up? If so, you then are going to need an additional HDD to store the backups. All HDDs will eventually fail, you just do not know when.
Ciao.

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

My hard drive went out one of my Macs and I am trying to install logic studio on another Mac but the serial number is invalid. What are my options?

My hard drive went out one of my Macs and I am trying to install logic studio on another Mac but the serial number is invalid. What are my options?

Check that the serial you are using is the correct one..
Typically the problem is either you are misreading the serial and therefore typing it in wrong. Check you are correctly entering zeros or O.. and so on....
or...
You bought the LP9 upgrade version.... which requires the LP8 full serial as well.
If it is the LP9 upgrade serial.. (and not the LP9 full serial) you must enter your original LP8 full serial first and then the upgrade serial for LP9.. when it asks for it.
Failing that.. you can obtain a replacement serial from Apple.. using this form.....
https://ssl.apple.com/support/proapps/serialnumbers/

What's the best SATA Hard drive

I just found a Hitachi SATA 160GB from Zipzoomlfy for under $110. Has anyone tried this SATA hard drive? Is the operating temperature below forty?
How about Western Digital or Maxtor? Do they operate at low temps.
I have the older Hitachi 120GB and it operates above 40C (IDE). I also have a seagat 40GB (IDE) and it barely goes above 36C.

check this at newegg hitachi 80gig as you can see, this thing is fast, cool, and most importantly so cheap that you can afford to get 2 and RAID 0...
just read the reviews at the bottom
i will quote the best one:
Quote
I purchased two of these for my system and set them up in a RAID 0 arrangement. They are remarkably fast. Yes you can barely hear the seak sounds, but far quieter than my previous Maxtor IDE drive.
I have my striping setup as 32kbyte, and formatted the drives with 32kbyte cluster size. This gives me 92 MB/sec bandwidth using Sandra benchark test. The Sandra program comparison reports that the 37GB Raptors achieve 95MB. So, should you pay the extra amount for the Raptors to get another 3 MB/sec? I think not!!!

What size hard drive will fit into a 2010 Mac mini?

Hello all,
I am planning to buy a new Mac mini. However I intend to upgrade the hard drive, i.e. buy a 320GB Mac Mini then remove the hard drive and replace it with a better one.
I have my eyes on two Western Digital hard drives:
+ WD Scorpio Black 750 GB SATA Hard Drive (WD7500BPKT)
specs: http://www.wdc.com/global/products/specs/?driveID=905&language=1
+ WD Scorpio Blue 1 TB SATA Hard Drive (WD10TPVT)
specs: http://www.wdc.com/global/products/specs/?driveID=685&language=1
Here's the problem. I figured that being both SATA 2.5" drives, they would have the same dimensions. It's not the case:
+ my preferred choice, the Scorpio Black (with faster 7200rpm) has a height of 9.5mm
+ the Scorpio blue (1TB but 5200rpm, slower than the default drive) has a height of 12.5mm
So I wonder, which of them would fit in the mini? Both of them? Afer hours looking for it, I couldn't find the exact specs and dimensions of the default drive in the Mac mini.
Questions this arises: if the Scorpio Blue fits in, then will the Black be loose because it's thinner?
I just went to my local Apple retail store, the flagship Opera store in Paris. I asked two Geniuses there and neither of them was able to answer my question, including the so-called hardware expert (duh!). They just told me "good question", and advised me to be careful with dimensions indeed because there is so little room in the mini...
Has any of you guys any clue on the subject?
+ any idea of the size/specs of the default drive?
+ any idea of what size drive would fit? Does the new disk have to be the exact same size or not?
FYI I checked the specs of the mini they had on display, and the disk reference is TOSHIBA MK3255GSXF. It looks like a specific ref number for these Apple drives.
Thanks!
Message was edited by: aaSwebmaster

6 MONTHS LATER/UPDATE.
I got the the Seagate Momentus® XT 6Gb/s 750GB Solid State Hybrid Hard Drive. Was able to install it myself in the Mac mini; it works great! (now).
My original 350GB was near full and taking almost 5-minutes to load.
Now my computer boots up in under one minute. Big difference!
Apps also snap open quickly, all functions fast and with 8GB of Ram using my computer is fun again.
Note: Initially I just made a clone of my old HD to the Seagate before taking my old HD out. This did make a bootable volume but funky and eventually the mouse clicks took 4-5 minutes to work!?
So I wiped the Seagate clean, did a new/fresh install of my Mac OS onto it and then used the Apple Migration Assistant app to get all my apps and data over - This worked and no funky stuff developed.
It's the best change to my computer in years. Feels great...and besides the features of the fusion-sytle hybrid drive (SSD & regular) I got 450GB of new, extra space...now I can put my work aside for awhile and try out one of these 12GB games!. Rock on.
INSTALLATION INSTRUCTIONS: patience, patience, patience and instructional video at OWC; yet the insides were different, an extra plastic 'cage' around the HD. Just be careful & alert.

Native SATA hard drive support for hp pavilion notebooks DV2000 , DV9000

Hello,
decided to post a question on this hp forum instead of the hundreds of other tech forums out there in the hopes of recieving a valid knowledgeble response. (Also since the question relates to Hp products lets give it a try on here>>)
So here is the question I'm trying to get answer for. Can a SATA hard drive from DV 2000 series notebook be used in a DV 9000 notebook series? I have done some forum reading and apparently there is compatibility issues depending on chipset (Intel or Amd or ATI?)
My Dv2000 series had a fujitsu 250gb hard drive which ran Vista 64bit on an AMD/nvdia motherboard,
I want to use this in my DV 9233cl notebook which has an Intel/nvidia chipset motherboard.
When I insert the fujitsu 250gb into the dv9233cl the notebook powers on, does a read of hard drive for 10 mins or so (hdd LED lights up, goes dim while reading) then says : No OS found.
I tried to do a fresh install using Vista CD; its doesn't recognize the drive. I click option to load drivers for hard drive (yes I also got intel drivers for Intel SATA controllers from hp web site) the drivers load but still do not pick up the hard drive;
I want to know two things really..if at post the motherboard reads the drive or trys to does this means the hard drive itself is good/healthy? If so , why does it not recognize by Vista Install disk or by the intel SATA drivers?
If anyone can accurately say what the problem is would be great.
Thank you.

Hello,
Thank you for responding and opening up the discussion with more information.
I refered to it as new in my post in reference to obtaining it recently after my older dv2913cl.
The dv9233cl is in fact old, however I installed a brand new intel/nvidia motherboard into it.
The system boots, bios has native sata support set to 'enabled'. During post it recognises hdd device as it starts to click and spin and read. After it will say ' no OS found'. This to me seems normal as the hdd is not 'configured' to boot on the dv9233cl?
Also the systm boots and runs fine into mini Xp for diagnostics. So overall I know the dv9233cl is functioning.
However mini Xp does not recognise there is a hdd device.
Wanting to reformat or do a fresh install of Vista I boot from the Vista Install disk. It does not pick up or recognise a hdd is present. I install Intel SATA controller drivers which I obtained from Hp website (as suggested by expert forum members to those who have similar SATA hdd not being recognised with intel motherboard)
Link for intel SATA drivers for XP and Vista
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-542...
I used the SATA controllers which came up on the screen and even try going through each one ; however the SATA hdd device is not picked up. So this is the main question and issue. Neither any DOS hdd utility , mini XP or Vista install disk recognise there is a hdd present.
Why is it not recognised and how to resolve.?

Need help in installing a SATA hard drive with 865pe NEO2

Hello there
I need a help in installing a Sata hard drive ,it is WD 250 GB , my motherboard is 865PE Noe2 , the bios is the latest one
already I got another old hard drive ,not a Sata ,a regular IDE one installed as a master hard drive
I want to install the sata hd as a slave for the IDE hd for now to transfer the files and documents
I already physically installed the Sata hard drive yet the problem is that it was listed in the bios , I followed some of the steps here in the forum mentioned but all what I got is I found it listed as the fourth IDE master , not as the primary IDE slave
in Windows Xp Sp2 it is not listed of course in the windows explorer , but it is there in the device manager
look I am very confused and I tried most of the combinations in the ide configuration in BIOS
what should I do coz I am feeling so bad and stupid ,you can consider me a n00b in this hard drive thing

1st the sata drive cannot be listed as a slave drive to the ide master [key word=ide-can be configured as master OR slave, master IF only 1 hd, master and slave IF 2 hds], on the sata controler you can have master and slave, the ide cable has two connectors for the hds, sata has only 1 hd connector.
are you wanting to install the sata as primary master and move the operating sys to that drive, if so you will need an IMAGING software to move an operating system OR you could do a fresh operating system install to the sata drive then install your programs.

HT5634 How to put windows 8 on MacBook Pro via sata hard drive USB off of other computer

Hi I have recently purchased a MacBook Pro 15 retina. My old laptop was windows 8 but the motherboard crashed and I have the sata hard drive that has all of my data info including OS would I be able to use the OS on Boot camp without purchasing a new license? Also how would I do that? I have put the hard drive into a portable USB device so I can access it via USB 3.0.

Others will give a better answer, but I suspect that Windows validation will consider this a "significant hardware change", meaning that it will stop working and/or you won't be able to update. Even so, it costs nothing to give it a try and see what happens.

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

MacBook hard drive and SATA hard drive

Can I use the Hitachi’s Travelstar 5K160 HTS541616J9SA00 2.5-inch SATA hard drive to, instead of putting their drive in the enclosure (it doesn’t come pre-installed), put my MAC Book (black model) hard drive in? I want to transfer the data from this hard drive into another MAC Book. My original computer had a problem with the board but I have my hard drive with data intact. I want to buy this SATA but am not sure if this would work, if I can put in the MacBook hard drive as if it was the SATA one... Help, anyone? Thanks!
MacBook Mac OS X (10.4.10)

Hi there,
A number of people on NewEgg's product page for that drive say it's great for a MacBook, so I'd assume it's ok.
You can put your old MacBook hard drive into any external USB2.0 enclosure and retrieve the data.
Regards!

Installing Windows XP on SATA Hard Drive

Hey. I have a maxtor 80gb SATA hard drive that I put in my new computer, and I want to install Windows XP on it. I see that the computer recognizes that it's there, but when I do the F6 process to get the drivers for Windows I cannot get anything for some reason. I hit F6, and it gets to the point where it asks me to install a disk with drivers, and I put the floppy for the VIA drivers in the drive (I'm using VIA after all I've read), and nothing happens. I don't even hear the floppy doing anything. after a few seconds of "please wait" the same screen comes up telling me to put the floppy containing the drivers in. Does anyone know what the problem could be? Also, in bios, it seems to recognize my floppy drive, since it lists it, and I can use it as a boot drive. If someone could help me out, I'd appreciate it. Thanks.

Hi
What is meant is the floppy is controlled from 2 parts of bios.
1. go to advanced bios features, set floppy seek to enable, set boot sequence to floppy, CD, HDD(BB1 = SATA), enable other devices. Then go to integrated peripherals, make sure PATA IDE and SATA IDE are enabled, just below is floppy controller, enable that, then SAVE and exit,
If the floppy cable was inverted, the drive light would be on all the time, if it flickers oon and off, it is OK.
Now try the F6 routine, if it still does not work then a new copy of floppy may be needed.
Cheers
jocko

What SATA hard drive(s) would one recommend for a G4 Sawtooth?

Similar Messages

Maybe you are looking for