What scenarios leads to put away in WM

Hi Experts,
In perspective of WM, let me know the basic questions,(actually, i tried to get it from by searching SDN, but, i do not find exact meanings, apart from allocation the product quantity for a bin in ware house)
1-What is Put away?
2-What scenarios leads to put away?
3-Its uses
thanq

Moved for you...
(you can open the question again)
Cheers,
Julius
ps: Sorry, I dont know the answer either, but perhaps you are refering to [obsolescence|https://forums.sdn.sap.com/search.jspa?threadID=&q=obsolescence&objID=&dateRange=all&numResults=15&rankBy=10001]?
Edited by: Julius Bussche on Mar 26, 2009 10:00 PM

Similar Messages

  • IS-R: Scenario to Create Delivery Order for Put Away? (MD)

    For Put Away in merchandise distribution, how come a delivery order can be generated?
    Since Put Away is to place the goods to shelf, there should not be a delivery order generated as follow-on document. However, in SPRO, we can configure at what point the delivery order is to be generated for Put Away e.g. After Adjustment (and then delivery order can be generated in WF30).
    I would appreciate a scenario where a delivery order should be created for Put Away.
    Any advise would be appreciated.
    VT

    Hi,
    Merchandise Distribution Plan can be done by two method:-
    Pull, Push
    Pull is nothing but collective PO
    Push method consist of putaway, cross docking, flow through..
    Scenario for Put away
    Head Office decide to procure Article 50 for store 1, 60 for store 2, 40 for store 3 by putaway method useing allocation WA01.
    so whenever stores require merchandise, DC sends goods to stores from their stock...
    In this scenario, store has to procure merchandise from DC as allocated by Head Office.
    Regards
    Vijai Jain

  • SMQ2 Error: Delivery has not yet been put away / picked (completely) in ECC

    Hi All,
    I am processing an Outbound Scenario..everything is fine until SMQ2 shows an error in ECC system. SMQ2 shows me the following error:
    Delivery has not yet been put away / picked (completely)
    Message no. VL609
    My outbound delivery which was distributed to EWM system has overall picking status as blank (Not relevant for picking).
    Our system is recently upgraded to EhP6, since then we are seeing this issue. Interestingly VL01NO (Delivery without reference to Order) works properly.
    Other ECC-EWM integration settings are fine. Delivery Type and Item Category also look good.
    I could not be able to find any OSS Note relevant to this situation.
    Could you anyone help me.
    Thanks
    Mahesh.

    Further what I see in this Outbound Scenario in EWM is when I am creating Outbound Delivery meant for EWM system with ref. to Sales Order, "Picking" tab shows EWM WHN but also shows Overall WM status as "Transfer Order Required" which is not correct.
    If I remove Storage Location and re-enter then Over all WM status and Over all Picking status fields come as blank. But after all EWM processing, SMQ2 queue (FM: BAPI_OUTB_DELIVERY_CONFIRM_DEC) fails with error
    Delivery has not yet been put away / picked (completely)
    Message no. VL609.
    Any thoughts?
    Thanks
    Mahesh

  • Automatically split quantities on a put away.

    The scenario is as follows:
    We have two locations for a product '123'. One is a pick location which will hold up to 150 units of item '123' and the other is a bulk storage location.
    When a put away task is created we want it to automatically show a quantity up to 150 to be put in the pick location and the balance of the delivery to be assigned to the bulk storage location.
    Is this possible without manually going into the confirmation of the put away task and selecting the split quantities and then manually selecting the second location?

    Hi Sanjeev,
    as far as I see, the invocation service really does not start up automatically.
    However, the following code should autostart all services marked requiring autostart according to the documentation of the DefaultCacheServer.start() method, which by the way also implies that this is the expected behaviour (that autostart services are not started by reading the cache configuration, but only the start method, which is by the way called by the DefaultCacheServer application, so you need not worry about that in case of the standalone cache server JVMs).
    CacheFactory.ensureCluster();
    DefaultCacheServer.start();Depending on what kind of container you deploy to, a single place is probably available for starting up the cluster.
    E.g. in Weblogic:
    - you can use an application server startup class if you have Coherence deployed to the server classpath.
    - if you have Coherence deployed as part of your application, then you can just use an application startup class (deprecated) or application lifecycle listener (recommended). In this case you need to have such a class (application lifecycle listener or application shutdown class) anyway, to properly shut down Coherence, otherwise you will get strange NoClassDefFoundError-s upon redeploying the application.
    Best regards,
    Robert

  • TS1363 My father in law decided to clean up my computer and accidently wiped off something important(dont know what).He then took it away and said he would get it fixed.When he brought it back he said that everything was back on  but I needed to install i

    My father in law decided to clean up my computer and accidently wiped off something important(dont know what).He then took it away and said he would get it fixed.When he brought it back he said that everything was back on  but I needed to install itunes,Ive installed the latest version and the quicktime.
    It seemed to have worked ok and all of my songs are there but when you try to play them, they just dont play.
    Ive tried putting a cd in and that wont read or play.
    Ive gone on to the itunes store and tried playing a song there,when I click on the play button the blue circle activates but just continues in a clockwise rotation but doesn't play.
    I have a old ipod,my wife and I have iphone 5s and a ipad mini.
    I am affraid to plug them back into my computer until I sort the problem out.(they had been plugged in before this happened and worked fine.
    HELP PLEASE
    Scott Hodson

    Do you memeber the complete wording of the error message?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Delivery has not yet been put away / picked (completely)

    Hello SDNers,
    I have a Batch program that is calling VL02n for Delievry Picking ,Pcking & PGI....
    This batch program runs in Background
       For Some Delivery it is giving this Error Message "Delivery has not yet been put away / picked (completely)"
    ...But When i run the same program in foreground delivery got Processed  Well.
    CAN U PLS HELP ME
    >Why this Happening
    >In what scenarion we genearally get this message(we dnt have TO Confirm Step in our Process)
    >even i Analyze the Program of VL02n ...This message is not there
    From Where this message is comming
    Thx in advance
    PLS RPLY ASAP

    After reading again through your messages, I understand that you are doing both PICK and PGI in single update BDC call to VL02N.
    This is NOT correct way to do this, as this does not ensure that PICK values are committed first and then only PGI is attempted. We did face similar problems and have solved it by separating PICK and PGI in to two calls separated by COMMIT WORK AND WAIT.
    I would suggest you to split your BDC into two calls. One which does only PICK and save and then followed by COMMIT WORK AND WAIT and then followed by another which does PGI and save. This should avoid the problem altogether.
    Why it is not happening in foreground mode is it does not happen so quickly as in background. Even a split second can make a difference, that is why I would want you to split up both PICK and PGI update in two separate CALL TRANSACTION VL02N
    I am not sure if it would help to know where the "Delivery has not yet been put away / picked (completely)" message is raised, as it is raised withing SAPs PGI routines, and it is mandatory that ONLY picked values are used for PGI.
    I can only say that the message is given under id VL and no 609, it should be embedded somewhere in the PGI call, why don't you try to PGI without picking and put a watchpoint SY-MSGNO = 609

  • Backup Device not being "put away" properly.

    I use a WD 1TB hard drive for my time machine backups. It's designed to sleep with and wake up with my mac. Now, whenever, I close the lid of my mac without ejecting the time machine drive, I always get an error message that "Data in the disk might be corrupted as the disk was not put away properly". What should I do to ensure that this message does not appear?
    In Windows, I used to disable "Write Behind Cache" for that disk. Is there something like that here? I'm new to mac. Please help.

    I would suggest you unmount the disk (drag it to the trash - no it won't be deleted!) before closing the lid.

  • Trigger on RCV_SHIPMENT_HEADERS while Receipt Updation in Put Away Report

    Hi,
    I am working on PUT Away Label Report :
    The process is follows:
    When receipt is saved , a trigger will fire on RCV_SHIPMENT_HEADERS and in trigger a package will be called which in turn will submit the report for the receipt that is newly created.
    The problem here is trigger is working fine when new receipt is created,But when receipt is updated using ADD to receipt option or In case of Internal sales order.The trigger is not firing as trigger is fired for every new insertion.
    I am not able to find any column to know that receipt is updated and to track the quantity that is receipted recently . Since RCV_SHIPMENT_LINES table will have the track of the Total receipted quantity till date.
    I am attaching the script of Trigger i am using for insertion.Please suggest me how to approach in this scenario.
    Trigger that is used for new receipt insertion:
    AFTER INSERT
    ON rcv_shipment_headers
    FOR EACH ROW
    DECLARE
    PRAGMA AUTONOMOUS_TRANSACTION;
    l_request_id1 NUMBER;
    BEGIN
    BEGIN
    If :NEW.RECEIPT_NUM IS NOT NULL
    Then
    l_request_id1 :=
    fnd_request.submit_request ('XXINV',
    'MTUPUTAWAY',
    NULL,
    :NEW.RECEIPT_NUM,
    :new.SHIP_TO_ORG_ID
    commit;
    End If;
    END;
    EXCEPTION
    WHEN OTHERS
    THEN
    NULL;
    END;
    Thanks in advance,
    Best Regards,
    Mahesh

    you should post this question in the ebusiness-forum..

  • Production order put away in WM

    Is it possible to directly put-away a production receipt to a Bin? Meaning if i do a CO11N it will confirm to Storage type 100 and bin ABC directly without going through the interim Bin which is the storage type 902 and production order number?
    I don't think its possible based on what I know but I want to confirm.
    Does it have to go through the interim bin in 902?
    <removed by moderator, read the forum rules>
    Message was edited by: Jürgen L

    Hi, this will work but I'm not convinced it would be the best solution as all materials would be placed into bin ABC and you would have to transfer everything out to the correct bin.
    I think it would be better to flag the mvt for auto TO and amend the receiving storage type so that placement confirmation is not required. The defined search strategies and any capacity checks would then be utailised, along with the individual bin numbers from the MMR.
    Cheers

  • Pallet Wise Put Away

    Hi Experts,
    I am new to warehouse management, I have a scenario. Suppose we receipt material code xxx Qty 3300 Nos. One Pallet Qty 500 Nos. We can place one pallat in one bin only. Now we have to place this material in 7 pallets, 500 nos = 1 pallet in 6 bins and rest 300 nos in 7th bin.
    Please help me how to configure in system / spro.
    Thanks and Regards
    Ishu

    Hi
    In the WM2 view in the material master in the palletization data you need to say that 500 of yopur base unit of measure i.e. EA = your Storage unit type
    Example
    500  EA   S1
    When you do a GR the syatem will calculate that 3300 = 5 X 600 and 1 X 300
    Depending on yor put away strategy the system will then put away the pallets in to individual bins
    I hope that this helps
    Frenchy

  • REG:PUT AWAY SRTATEGY

    Hi Gurus,
    I am new to these put away strategies,well i have a scenario were I need to add the stock in addition to existing stock first
    if there is no bin with same stock it should go to next storage type,but it is not working.Can some one help me out with this.
    Thanks,
    Raju

    Hi Raju,
    I think you are using Strategy I: Addition to Existing Stock.
    When addition to existing stock has been defined as a putaway strategy for a storage type, the system places goods in storage bins that already contain the same material. With this strategy, the system searches for a storage bin in which the material is already being stored. If the system cannot find a storage bin with the same material or the capacity of the storage bin will not allow additional quants to be stored, the system switches to the "next empty bin" strategy, that is, it searches for the next available empty storage bin. It is not working because it is finding an empty bin and does not going to next storage type.
    I belive you should activate a user exit to solve the problem.
    Regards.
    Patricio.

  • Put Away Strategy

    Hi,
    Here is my scenario:
    I am using put away strategy to propose destination details. While proposing bins I need to check if there is a material already available in that bin and a Condition (date placed +1 day) otherwise another bin need to be proposed.
    Could you please suggest me a user exit/badi available for this scenario? If so could you please also provide additional details how to implement?
    BR/Sanjeeva

    Hi,
    Youhave use the enhancement MWMTO003 for this.
    There are 4 exits available : EXIT_SAPLL03A_001  to EXIT_SAPLL03A_004
    hope this helps
    regards

  • Ive Had  32gb IPOD Touch n now just got an 8gb IPHONE 4S. My question is how am I supposed to sync my iphone without it syncing my current library that is well over 32gb of info? In other words, can i pick and choose what I want to put on just iphone?

    Ive Had  32gb IPOD Touch n now just got an 8gb IPHONE 4S. My question is how am I supposed to sync my iphone without it syncing my current library that is well over 32gb of info? In other words, can i pick and choose what I want to put on just iphone?

    thanks but if Im using iCloud For my Iphone and backing my ipod touch to my computer is that ok or would I have to back both up to ICloud. As u can telll, I want to kep the 2 devices seperate as much as possible, only putting on my phone what i choose to download, buy, or take from my current itunes library most importantly.

  • What mode should i put my computer in before travel

    Ok, i will be bringing my macbook to school with me come this semester. what mode should i put the laptop in before putting it back into my book pack after a class to travel to another class. So im looking for a mode like sleep, completly shut down, etc. that will be safe to move the laptop around. preferably a mode that has a quick start up time so i can put it into whatever mode, travel then put it down and quickly restart taking notes. thanks

    idaveb wrote:
    Relying on the Sudden Motion detection is not a good practice. The safest way to travel with your Macbook (and hard drive that spins) is to shut it down, anecdotal experience aside, it is the best practice. I work with peole who carry their PC laptops around running and they have no problems (except they heat up) but that is like saying, I don't wear my seatbelt and I have never needed...until you crash. Shut it down. It will not save that much time using sleep mode and restarting does some initialization that binary computers need.
    That is complete untrue. Sleep mode puts the HDD to sleep, basically OFF (Not Spinning) so the SMS does not even come into play when in sleep mode.
    If you carried your notebook with the lid/screen open and not in sleep mode then you do depend on the SMS to Dock the HDD heads when a sudden movement may/might damage the drive. This is not the case in sleep mode even with the lid/screen open.

  • I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it.  I don't remember it even w/ the hint

    I've had my iMac put away for about a year, now I can not remember the admin password upon startup. And I don't have the installation cd's (of course)! Is there any way to re-boot, re-do, get into my Mac to change it.  I don't remember it even w/ the hint

    Call Apple with the Serial and they will send you the ones that came with the Mac. Or search the Net.

Maybe you are looking for