What SCSI card with DELL PV110T 200GB LTO2 LC External tape and XServe G5?

XServe G5 - Upgrading tape station...
As is I'm using a DAT station but it is starting to misbehave so I would like to replace it with the
DELL PV110T 200GB LTO2 LC External station.
As is I´m using the ATTO, ExpressPCIProUL4D card.
Can I continue to use that card or do I need another card.
If I do need to switch which card would you recommend.
TIA
Hans

The UL4D is, IMHO, the best card for the XServe G5. I've used them for years with no problems (unlike certain other vendors cards, who shall remain nameless).

Similar Messages

What sound card with DTT3500

what sound card with DTT3500h Hello ,
acatually? my sound card is a sb Li've! 024 player connected to Cambridge Sound Worhs DTT3500 by spdif cable.
I'm on windows XP , and by the and of the year I'll be on windows 7.
Windows? 7 doesn't support my old good sound card <img alt="[/img] src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" title="Smiley Sad">
I know that the X-FI card dosn't work with the spdif of the DTT3500 , which leaves me no choice but the audigy card I think.
So the question is : what type of Audigy work well with de DTT 3500 ?
Sorry for my bad english.
Message Edited by angelo_tth on 08-09-2009 05:58 AMMessage Edited by angelo_tth on 08-2-2009 07:02 [email protected]

Yes, DDL works with EAX. That's probably you're best solution. You could either get a Titanium or Prelude, which both come with DDL.
Alternati'vely OEM Xtreme Music and Xtreme Gamer (SB077x series) cards often have optical ports. You could get one of these and add the DDL Pack from Creative (about $5 American). That can work out cheaper than a Titanium or Prelude.
Creative sell a flexijack adaptor giving optical out ports. That will work with most X-Fi models.
If you play a lot of games I would skip the Audigy series and the X-fi Xtreme Audio.

HT201250 I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?

I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?

I guess if stolen or lost it would protect my "stuff", and if I'm travelling would protect my privacy.
You must understand the purpose and implications of encryption before deciding whether to use it.
Encryption locks your data with a password. If you forget that password, the data is lost beyond any chance of recovery. Neither Apple nor anyone else will be able to help you recover that data if you don't know the password.
By the same token, the password must be strong enough to provide the security you want. For example, if you're the potential target of industrial espionage by a government or large corporation, you need the strongest possible password. To create and manage such a password safely is a task in itself, not to be undertaken lightly.
If you're only concerned about casual snooping by someone with no special skill, a weak, easily-remembered password is appropriate.
But regardless of the strength of the password, if you lose it, the data is gone forever.
Another point to remember is that if you encrypt your data on one storage device, you must also encrypt it on all other storage devices that would be accessible to the same attacker. Otherwise the data isn't protected. For example, if you keep your computer and your backup drive in the same room, and the internal drive of the computer is not encrypted, then there's no point in encrypting the backup drive.

What SCSI card do i need for new Mac Pro?

hello all, can anybody give me a straight answer on the cheapest SCSI card I can buy from UK, to fit in my Mac Pro. I have googled and searched the forums and am getting confused by talk of all the different types.
I have borrowed an old neg scanner, which is SCSI only. The guy gave me a SCSI card as well, but it came from a PC. I figured I would chuck it in the Mac and see if it recognized it. Cue epic fail, because it appears only to fit in "backwards". that is with the scsi port facing into the case.
No big deal I thought, I'll just buy one. I had no idea it would be so complicated.
Speed of connection is not an issue to me, I just want it to work!
Please help, thanks in advance
stu.

Hatter, thanks for the speedy reply. Can I only put in an expensive SCSI card? Why don't the cheapo 50 buck ones work? Sorry for being dense...
I hear your point about cheapo USB scanners, but the SCSI one i got was free! Just looking to archive my years of negs and want to keep the costs to a minimum. Will defo check out firewire adapters though. good call.

What is up with Apple's Network not supporting Network scanning and even Ne

Hello.
I have a HP 3210 Network printer/scanner. After upgrading from my LinkSys router to a Time Capsule I now find that my HP Network scanning capability is dead. Apple tech support has admitted that they don't support scanning nor even some network printers on the Time Capsule, airport & Airport express. Apple won't even give me enough details on the issue so I can talk intelligently with HP???
What is up with that? That is completely unacceptable. I can print to my printer, I can browse the built-in web server (and scan interestingly enough using the web server), but when you try and run the HP scanning client it indicates it can't communicate with the printer/scanner.
Any ideas out there? I'm really disappointed.
Len in Canada

What is the deal here?
Easily explained: On or about 24 July the entire discussions.apple.com web site was moved to servers running Windows Vista Enterprise OS. The site was compromised approximately 6 seconds later by a group of Romanian hackers believed to be funded by Nigerian Internet scammers who had millions of dollars in credit to play with when hundreds of thousands of victims sent them their credit card numbers to pay what they thought were nominal fees to get some of the 100,000 missing iPhones sold the first week but according to AT&T never activated. Supposedly, a malfunction in a mail router or address machine (the story varies) inadvertently sent all these phones to a mid-ranking Nigerian official who needed financial assistance with getting them out of the country.
Well, either that or the site is still controlled by Apple & has been undergoing extensive changes which, shall we say, have not yet been completely sorted out, much in the same way that Iraq has not ....

I downloaded Creative Cloud Book lessons, but don't now what to do with them so I can open in Photoshop and follow the lessons

I downloaded the files from the Adobe Photoshop CC Book
In in my 'download' folder.
I don't know what to do with them so I can use them as I follow the lessons in the book
Thanks all,
Cate

You also need to have the Photoshop CC installed in your system. You can use the trial for 30 days. https://creative.adobe.com/products/creative-cloud
Regards
Rajshree

Ok what is up with the iPhone 5, went to verizon today and they told me not to buy one

went to verizon store today to replace my iphone 4 with a 5 and they told me dont buy one they are really bad and you will be unhappy, what is up with that?

What's up is that the Verizon sales rep either doesn't know what he/she is talking about, has misinformation and has formed an incorrect opinion based on that, or quite possibily is getting a bonus or other pressure to sell other, less popular phones that they have too many of. Many millions of people are very happy with their iPhone 5s.
Regards.

Ultra 320 SCSI card with Snow Leopard Server?

First off, sorry if this is the wrong place for a thread on Snow Leopard server.
I have an older Intel Xserve (xserve1,1) with the Apple-branded Ultra320 SCSI PCI-X card. This isn't a third-party card, this is the one from the Apple Store.
So, are these confirmed to continue to work under 10.6? My server runs 10.4 (I'm skipping 10.5).
Thanks!

Hi
A Beta version is exactly just that. No-one apart from Apple knows for certain what the release version will support. Installing a Beta version of anything on a Production Server would not be a good idea in my view. Although one could risk it if a fully working bootable clone of the current Server was done first prior to installing the Beta (or an update for that matter). Perhaps it's just my cautious nature but I personally would not risk it.
I've been part of the AppleSeed program for 10.6 Server and Client from the outset and am testing both on my laptop.
Tony

What's wrong with a "regular" global in this case? AND WIl ActiveX objects stored in functional globals remain valid (when used in an executable)?

I've written a plugin layer for a LV executable. When this layer makes a call to the plugins' initialization functions, I want each plugin library to be able to initialize and maintain its own global memory (where things like VISA resource names or ActiveX objects are stored). However, I've found that I can't manage to keep my global VIs "alive." I'm inclined to switch to functional globals, but I suspect that this will be a problem for things like ActiveX objects (that in this particular case reference a CAN interface). I believe that the functional global will indeed store the object from run to run, it's just that I'm somehow disinclined to think that the object will remain valid. I think you'll have to re-initialize it. Can anyone speak for or against this hunch? (If you can't tell, I'm trying to avoid building a whole little test executable just to debug this problem.)
I suppose the more profound question is "Why don't the globals stay in memory?" I'm attaching an image of what the application layer that calls the plugins' intializations looks like. Next I'm attaching an example of an actual initialization routine. You'll notice that I've even gone so far as to explicitly open the ref to the global VI that I want to keep in memory. Then I just leave it there dangling - but it still gets dropped! In my mind I shouldn't even have to do this, since the dynamically-called subVI "MC_CMO Init.vi" actually initializes the globals and runs with AutoDisposeRef = False.
Lastly, this is my first-ever attempt at writting plugin software. So if you look at my code and have any criticisms/pointers, I'll greatly appreciate them.
Thanks in advance,
Nick
"You keep using that word. I do not think it means what you think it means." - Inigo Montoya
Attachments:
AppLayer.JPG ‏60 KB
InitPlugin.JPG ‏103 KB

I am not sure if I follow you completely on your work-around.
Everything I have to say on this topic is based on obesrvations and threads I have read on Info-LabVIEW. Therefore it is subject to corecttion by those who know better.
LV is smart enough to know when "something" that had been opened, can be closed. It is not perfect.
If for instance you open a VISA refnum and pass the refnum to a LV2 AS A REFNUM the refnum in the LV2 stay alive as long as the VI's are running.
If you start another VI that uses the LV2 to fetch the refnum, it should get a valid ref as long as it starts before the first goes idle.
You then be able to work with refnum usign the VI launched second as long as stays active.
I often create action engine that can be invoked where required throughout an application. If the action engines get a ref in one state (like init) and use it another, I will generally write a "tester" that calls the action engine action to test the engine. In this case, my "tester" stays live and it keeps the ref's fresh.
I suspect if you tried to trick LV you could. If you type cast the ref nums to I32 and stored those in a LV2, I could see how LV could loose track of the resource sharing, but that is something I would avoid.
So I encourage you to do some experimenting with keeping track of who's running when to see if your work-around will work.
If you think you understand it better than I explained it, please post.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can I use two SIM cards with one iPhone5s? ie, switch phone numbers and plan, same carrier?

I live where there is no Cell service in remote BC Canada. Fortunately, we have highspeed Internet! Thus, I have been using an iPod Touch 4th gen & Skype to make all my calls for a 2 or 3 years. I travel a couple of times a month into cell coverage. I plan to use my iPhone 5s on a iPad Data Package when in cell coverage. I called and asked bell if I could do so if I bought an unlocked iPhone. I was told yes, but recieving calls would be very expensive. I have email notification and a phone number where voice mails are emailed to me, so am able to do without recieving calls in most cases. However, certain situations lead to frustrating telephone tag.
Just today, after receiving my unlocked iPhone 5s I realised that Bell also has a pay as you use plan that is very reasonably priced for cell calls only. If I was able to switch SIM cards I could get both plans. Thus if recieving a call or placing one was important I could just switch my SIM card. Could that be done reasonably and practically?
I would appreciate an answer to this question!
Scott

Let me see if i got this straight. You have two iDevices. One is an iPad, which uses 3G Data. The other one is an iPhone 5s. You plan on purchasing two plans, One thats has only 3G Data, and the other one that has only phone calls, and messages.The answer to your question is Yes. At least i done that with t-mobile USA. If your iPad is compatible with nano-sim cards, yes you can. If not, you will have to buy an iPad with nano-sim such as the iPad mini 3G. This is totaly possible.

What loops come with version 8? Looking to replace Garageband and Soundtrak

I am looking to replace Garageband 08 and Soundtrack 1.5 with Logic Express 8. Should I save those audio libraries or does LE 8 have it's own or duplicate?
Thanks, Ed

Hi,
I'm pretty sure that, whatever you have available to you in Garageband, is also available in E8 so, yeah, E8 is pulling from the same loops. I can't really be sure if E8 has extra loops simply because I've bought and/or downloaded so many loops over the past year or so that I've pretty much lost track of what were the original loops. What I can tell you is that they are much better organized in LE8. For instance I bought some drum loops from "Drums on Demand" and in the media section of LE8 they're listed under "Drums on Demand" which garageband and LE7 did not do. There was nothing in the literature stating that LE8 came with extra loops. Pro 8, however, comes with the first 5 jam packs included. That pretty good when you figure that that's nearly $500.00 worth of loops plus all the other extra stuff you get with Logic Pro Studio and it's only $299.00 more. The reason I didn't go pro is that I already have the sounds, plugins and loops that I need for the music that I do so, for me personally, Pro would just have been overkill. But if I ever get tired of my external synth the I might ditch it, buy a controller and go with Logic Pro Studio. It's nice to have the option at such a reasonable price.
Rainguitar

What to do with expired trial InDesign 5.5, InDesign 5, and upgrade to 5.5

I have an expired trial version of InDesign 5.5 and fully registerable legal copies of InDesign 5 and the upgrade to 5.5. Does anyone know if I can use the product registration information for the 5 and upgrade to 5.5 so that I can activate and continue using the application already installed?
If I can't, I've read that the uninstall process can be problematic and I should run a clean-up script afterward, neither of which I've ever done.
Any advice on how to proceed would be appreciated.

tm6550 wrote:
Okay, thanks, but I'm really a dunce about how this works. If I install the CS5 upgrade and use the serial number on the CS5 to activate it, am I left with an inactive trial version in addition to the new?
Hi, folks:
This is the downside of zealous, passionate, enthusiastic, and well-meant forum support. Sometimes, as now, somewhere along the line, a key piece of info was either not supplied or was overlooked, resulting in reverberating "delta" suggestions (delta, here, meaning, adding onto, or modifying, what's already present,) rather than whole thoughts and sentences.
I this the question is: How will an installed CS5.5 trial behave when given a serial number for a CS5.5 upgrade on a machine where no CS5 has been installed? The hope is that it will prompt for a valid CS5 serial number, or a valid CS5 disk, then proceed to validate the trial with the update's serial number.
The goal is to avoid having to uninstall the CS5.5 trial, to be able to install a full CS5 without any collisions with the installed CS5.5 trial, then install the CS5.5 upgrade.
The answer seems to be that nobody knows for sure, or that whoever does, either isn't on this thread, or is holding out.
I surely don't know.
I hope this helps to clarify the question.
Regards,
Peter Gold
KnowHow ProServices

Whats GOING ON with Pubcenter!? ALL TIME LOW Revenue and Fill rate!

Whats going on here? Since 3 weeks the revenue has has not picked up one bit!
I got the same number of impressions last month but the revenue was X3 more! :'(
WHAT IS GOING ON? Support has there is "no demand" due to season. What does that mean?
Why doesnt Pubcenter show Ads from other category of there is "no demand" in the currently configured Ad Categories (mine is all games)
I only have a Windows 8 app, can someone suggest an alternative please? At this rate I wont last long in this profession :'(

It' only USB that can be hot plugged ie connected & disconnected while the power is on.
Plugging in any PS2 device while pc is on can have dire results.
Try resetting your cmos.

What to do with the iPhone keep switch between apple logo and locked screen

Please help me with this , thanks

Try to Reset your device.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

What's up with this-QT file showing up in FFox and Opera and not in Safari

I am using the latest version of Dreamweaver (Adobe) and have embedded a quicktime file on a page such that it successfully shows up (via DW preview in browser feature) and plays in FireFox (latest version) and Opera (latest version). It's not showing up, though, in Safari. When I look at the code in Safari, the entire coding for displaying the file has disappeared; when I look at the page code under the other browsers, though - it's right there (and hence displays the file properly).
Ok - I give up. What is up here???!!

Ok, here is the original code in the HTML for just the quicktime file that's embedded:
<td colspan="2" align="center" valign="middle" bgcolor="#333333" height="576">
<script type="text/javascript">
ACAXRunContent( 'classid','clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B','codebase','http://www.apple.com/qtactivex/qtplugin.cab','name','Temple Ci\'um Film','width','640','height','496','src','TS CIUM WIP.mov','controller','true','autoplay','false','pluginspage','http://www.apple.com/QuickTime/download/' ); //end AC code
</script><noscript><object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab" name="Temple Ci'um Film" width="640" height="496">
<param name="controller" value="true">
<param name="autoplay" value="false">
<param name="pluginspage" value="http://www.apple.com/QuickTime/download/">
<embed src="TS CIUM WIP.mov" width="640" height="496" name="Temple Ci'um Film" controller="true" autoplay="false" pluginspage="http://www.apple.com/QuickTime/download/"></embed>
</object>
</noscript>
</td>
Here is the code I see when I PREview it in Safari using DW (where the file appears to have not been embedded at all):
<td colspan="2" align="center" valign="middle" bgcolor="#333333" height="576">
<script type="text/javascript">
ACAXRunContent( 'classid','clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B','codebase','http://www.apple.com/qtactivex/qtplugin.cab','name','Temple Ci\'um Film','width','640','height','496','src','TS CIUM WIP.mov','controller','true','autoplay','false','pluginspage','http://www.apple.com/QuickTime/download/' ); //end AC code
</script><noscript><object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab" name="Temple Ci'um Film" width="640" height="496">
<param name="controller" value="true">
<param name="autoplay" value="false">
<param name="pluginspage" value="http://www.apple.com/QuickTime/download/">
<embed src="TS CIUM WIP.mov" width="640" height="496" name="Temple Ci'um Film" controller="true" autoplay="false" pluginspage="http://www.apple.com/QuickTime/download/"></embed>
</object>
</noscript>
</td>
So - what do you think happened here?
Again, FireFox and Opera display the embedded file just fine.
Message was edited by: Actually Human (wanted to make SURE I put in the Safari code that showed up in Safari - correctly).

What SCSI card with DELL PV110T 200GB LTO2 LC External tape and XServe G5?

Similar Messages

Maybe you are looking for