What Setting are Applied to RAW Imports?

When I import my RAW files into Lightroom, what settings are applied to them - camera or Lightroom settings. If Lightroom, how do I change those settings?

Many of the camera settings are proprietary, Lightroom cannot read most of them. Consequently, Adobe must create camera defaults for every model of camera that shoots raw images. If you have a Nikon or Canon camera you can go to the calibration section in the develop module and find camera matching profiles for many of the in-camera settings. Most other brands of cameras will have one profile called Adobe Standard. All of these profiles are only available on raw images. JPEG images taken by the camera will have an embedded profile, and that's all that's available.
If you have a Canon or Nikon camera you can try the different camera settings available in the calibration section. Lightroom is programmed to read the Adobe Standard profile. If this profile isn't acceptable you can create your own preset with the settings the way you want them, and this preset can be applied when images are imported. Alternatively, you can set everything the way you want it to be initially on one of your images, and then save new camera defaults using those settings. Then they will be applied automatically to any images that you import into Lightroom.

Similar Messages

What patches are applied to the vanilla kernel to make kernel26?

I tried to find some information on the wiki, but it all it says is "Vanilla kernel with some patches applied". So what patches are applied?
Last edited by tjbp (2011-07-27 13:48:42)

http://projects.archlinux.org/svntogit/ … l26/trunk/ refers to ftp://ftp.archlinux.org/other/kernel26/
The paths will change for linux 3.0.

Importing nikon d610 files and presets are applying to raw files?

I just picked up a nikon d610 and every time I import photos several presets are applied to my Raw images. White balance, contrast, Vibrance, saturation, and sharpening. It's like an import preset is set but I don't have anything selected. This only happens on my D610, my D800 and D7000 import raw files in with no settings applied. Running LR5.5 on a Mac OS 10
Anyone experience this before?
Thanks

You mention an older camera, which opens the door to the possibility of older software. There are histories of older versions of Nikon Transfer doing bad things to files from newer cameras. Check to see that you have the most recent version of Nikon Transfer. If not, do the upgrade then transfer the files again from the card(s).

I am not able to load image from localdesktop in FF 7.01 via mu javascript but I am able to load and view is my office desktop with same version of FF.What setting are not the same in both boxes ?

I have JS where in from HTML input file type box, I pull the path of the image and then set it as src to image tag via javascript and display it on the same page for viewing.The same piece of code works fine in my office desktop FF 7.01 but it does not work in my local desktop computer when I download and install ff from mozilla.what setting should i change so that it displays my image in my image placeholder.

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

How do I determine what mointors are applied to an Agent

I am a powershell novice but my powershell knowledge is much better than my sql knowledge.
I am repeatedly asked, what are you monitoring on that server or this server or that group of servers? I would really like to have a relatively quick way of answering that without having to go thru the rules that the group has written, and check those against
the server groups and come up with an answer.
We are running SCOM 2012 SP1. I did find 2 refs (which I can't post until they verify my account)
One is from Stefan Stranger ( a 2007 script) one is from Technet (List All Monitors and Rules per Group of Servers) and the 3rd deals with export-scomeffectivemonitoringconfiguration.
With the first two, I am not yet skilled enough to convert that to Scom 2012. With the last one, even the example fails when I try and run it, even when removing the } that errors at the end.
Has anyone else set something up using powershell to determine this in a Scom 2012 environment?
Thanks
-Dre

(which I can't post until they verify my account)
The verification thread can be found here:
http://social.technet.microsoft.com/Forums/en-US/home?forum=reportabug
Post in the current verification thread (current 'Verify Your Account 14') and an admin will verify your account in a few (or more) hours.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

What styles are lost when importing/converting PS text to editable text?

In CS5.5, when I import a PSD file with one or more text layers (retaining layer styles and editable layer styles) some of the layer styles change upon import.
In addition, after import, in the Comp panel, sometimes there are no visual differences between that display and the display in PS. But in individual style layers in the Timeline panel, things have changed. Most typically, strokes with gradients are changed either to a solid color (gray or red) or to a simple white-to-black gradient. How is it the display can show a gradient when the stroke layer shows a solid color?
When the text layers are converted to editable text, those changed style properties kick in.
I'm guessing some or all of this has to do with AE text not being able to have a gradient for the fill or stroke? That being the case, is there a work-around?
If this goes beyond not being able to use a gradient for fill or stroke, what are the "rules"? What styles are lost/changed upon import and when converting to editable text?
Jeff Sengstack

> In addition, after import, in the Comp panel, sometimes there are no visual differences between that display and the display in PS. But in individual style layers in the Timeline panel, things have changed. Most typically, strokes with gradients are changed either to a solid color (gray or red) or to a simple white-to-black gradient. How is it the display can show a gradient when the stroke layer shows a solid color?
After Effects includes the entire Photoshop rendering engine, so any PSD and its layer styles should render fine (i.e., just like in Photoshop). If it doesn't, please submit a bug report.
But After Effects does not include the entire UI from Photoshop for creating and modifying layer styles.
The layer styles feature in After Effects exists primarily to provide fidelity between what you see in Photoshop and what you see in After Effects---not so that you can add and modify layer styles in After Effects. The UI in the Timeline panel is therefore a barebones implementation that doesn't include many of the features of layer styles in Photoshop. As you observe, there are many cases in which the representation in the Timeline panel is much more simplistic than what is in the Composition panel.
This separation between the UI and the ability to render with good fidelity is most apparent with pattern overlays. See this video for a good demonstration of how to use layer styles in After Effects by tapping into these features in Photoshop:
http://library.creativecow.net/articles/harrington_richard/photoshop_layer_styles_with_ae. php
> In CS5.5, when I import a PSD file with one or more text layers (retaining layer styles and editable layer styles) some of the layer styles change upon import.
How, exactly, do they change? A screenshot would be useful.
If it's what I'm suspecting, then the page that Mylenium points you to has the clue:
"When a layer style is applied to a vector layer—such as a text layer, a shape layer, or a layer based on an Illustrator footage item—visual elements that apply to the edges of the contents of the layer apply to the outlines of the vector objects, such as text characters or shapes. When a layer style is applied to a layer based on a non-vector footage item, the layer style applies to the edges of the layer’s bounds or masks."
When you convert between Photoshop text and editable text, you're changing the render order and also switching between raster images and vectors. This can affect appearance in many ways.

RAW import and filters in Aperture - red faces

I've imported RAW pictures taken in bad light conditions (8 000 ISO or more) in Aperture. As a consequence I have some and the faces of people in pictures appear "red", due to the visible noise.
When I upload those picts directly to my iPad 2, it seems the picts are filtered and the faces are "normal", the red colour is reduced. Picts are nice.
When I upload those picts in Aperture, after having applied some filters for optimizing the RAW pict, I can not remove completly the red colour. I can not get the same result as I have on the iPad : picts seem to be better on my iPad (compared with what I can get on the Mac with Aperture).
I'm not an Aperture expert, but does anybody know what kind of filter (equivalent to Aperture presets) are applied on RAW picts when importing on the iPad ?

"How do you import to your iPad? Reading the card using the camera connection kit? Or uploading from your Mac?"
==> I use the Apple camera connection kit, so using a direct connection between the digital camera and the iPad. The resolution on the iPad is very good.
I also have noticed, when I plug the iPad 2 to the mac (iOS 6), Aperture starts and proposes to import picts from the iPad whithin my APerture Library. I can see the picts I have previously imported into the iPad using a direct connection between the digital camera and the iPad.
Those picts are shown in RAW format (.CR2). So I guess RAW picts are imported in RAW format in the iPad (during the direct import). And the iPad includes a native RAW viewer in the mobile app "Photos". This app may include some filter or noise reduction capabilities.
"So, have you been importing raw+jpeg pairs or single raw files?"
==> I import single RAW files. On the camera, a Canon 5D mk iii, I have configured mRAW only, disabling the jpeg pair.
What do you mean by "embedded jpeg in the raw" ?

Does iPad/iCloud photo resolution setting apply to computer imports?

My iPad / iCloud settings are to store the higher quality original photo in iCloud while the iPad automatically, in the background, makes a second smaller version for local storage optimised for the iPad. This is a setting on the iPad. Does this function still apply when I import from a computer?

I read that if I use the Camera Connection Kit to load photos directly from my camera to the iPad, that the iPad "modifies/reduces" the resolution of the jpeg (if they were taken with a high res camera).
It doesn't.
The original file from the camera is copied to the iPad and it is not modified.
When you connect the iPad to the computer, you can then copy the original to the computer.
The reason I am concerned is that I want to use my iPad as a repository for my images while I am traveling and then move those photos to my computer for editing when I am back home. BUT if something is going to be lost in this process
Nothing is lost from CCK to iPad to computer.
When syncing photos back to the iPad thru iTunes, the photos get reduced/optimized to 2304 x 1536.

My husband and I share the same itunes account, but we are getting each other's photos on our phones. What setting will disable this?

My husband and I share the same itunes account, but we are getting each other's photos on our phones. What setting will disable this?

turn off photo stream My Photo Stream FAQ - Apple Support

Itunes 10 imports cd tracks in alphabetical order only. What setting do I change so it imports the same order as the cd?

itunes 10 imports cd tracks in alphabetical order only. What setting can I change so that it will import cd tracks in the same order as on the cd? Any help would be appreciated! I have this issue on only 1 of my 2 macbook pro computers, so I'm guessing it is a setting issue--but I don't know where to find it.

The apparent order of a burned CD may depend upon how you have iTunes display it - https://discussions.apple.com/message/17827921

What setting changes are to be made??

I am adding some .c files to my MAC application(cocoa), I am getting a lot of errors while compiling those files.
What setting changes are to be made before adding C files to MAC OS project???
If so can anyone point out that...??
1. I am getting errors with the #include statements in my files...
2. expected '=', ',', ';', 'asm' or '__attribute__' before 'asn_DEF_Payload'
How can I get around these list of errors??
Thanks in advance.

Sun Java Enterprise System Support Forum and the Directory Server's "Release Notes" [See docs.sun.com] is a good place to find this information. Also upgrade to the latest DS5.2 Patch 4.
One probable cause could be that either the BindDN or the SearchBase used by your application no longer exists in the upgraded server's setup. Please check the access log on the Directory server to pinpoint the culprit. The corresponding entry will have "err=32".
Examples:
SRCH base="dc=abc,dc=example,dc=com" ....
RESULT err=32 tag=101 nentries=0 etime=0
[Note: Tag 101 means the search base does not exist]
BIND dn="cn=user,dc=abc,dc=example,dc=com" ....
RESULT err=32 tag=97 nentries=0 etime=0
[Note: Tag 97 means BindDN does not exist]
Based on your requirements, you will either have to add the missing entry or upgrade your applications' configuration to use an alternative entry.
For more on Access Log contents see
http://docs.sun.com/source/817-7616/fileref.html#wp20452

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

The new event are created when i import photo in the top. Before they where put in the end. All my event are classified. Where i can set the event at the end ? Thank's.

The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.

View menu ==> sort events
LN

What order or in what way are the resource authorization policies applied?

I understand what RAP/CAP are and how they work and I know that the CAP are applied according to the order. The RAPs are not linked to a specific CAP. My question is how are the RAPs applied. You can obviously have a group or a nested group
in one or more RAPs. So does the connection attempt (after it gets by the CAP) get compared to all the RAPs before it is denied? I have been searching for hours and have not been able to find anything on how the RAPs are applied. I have both server 2012
GWs and server 2008 R2.
Thanks,

Hi,
Thanks for your post in Windows Server Forum.
When you associate an RD Gateway-managed computer group with an RD RAP, you can support both fully qualified domain names (FQDNs) and NetBIOS names by adding both names to the RD Gateway-managed computer group separately. When you associate an Active Directory
security group or an RD Session Host server farm with an RD RAP, both FQDNs and NetBIOS names are supported automatically if the internal network computer that the client is connecting to belongs to the same domain as the RD Gateway server. If the internal
network computer belongs to a different domain than the RD Gateway server, users must specify the FQDN of the internal network computer.
Might below articles useful for more understanding.
1. Virtualization: Use the RD Gateway
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks,
Dharmesh

HT1918 how do you determine what devices are set up under homesharing

Does anyone know how you determine what devices are set up under homesharing? I am not finding a list of devices under my account.

Welcome to the Apple Community.
There are no lists, you'll need to check each device.

What Setting are Applied to RAW Imports?

Similar Messages

Maybe you are looking for