What setting for .MP4 using Magic Video Converter?...

 What setting do you use for best video when converting video files to .MP4 using Magic Video Converter?? To play on Nokia N95 8gb.
After you have chose to convert to MP4, you can chose a load of diffrent "setting/format" for the MP4 file. But what would be best?

Here we go again.
Best for what?
Video quality, smallest size, TV-out, etc.
The best for TV-out is not the same than the best for watching in phone.
If you want the best size to quality compromise then a different setting may be better.
For example best quality to size compromise would be something like:
Container : MP4
Res: 320x240
Codec: Mpeg4 AVC h264 Baseline profile
Bitrate: 256 kbps
Framerate: as per source
Audio: AAC 44100 Hz @ 64 kbps
Message Edited by el_loco on 04-Sep-2009 10:26 PM
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

  • Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

    Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
    Everything is fine.
    -They are the right format
    -Quicktime is updated
    -I have tried simply dragging them into the 'movie' library
    -I have tried going to file<add file to library
    Nothing works, has anyone else had this problem and found a way around it?
    Any and all help appreciated.

    In addition to Mike's suggestions,  you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

  • What setting should I use for Abbey Road drums?  Getting a cpu overload issue

    What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)?  Getting a cpu overload issue.  I have a macbook pro, 4 gb ram, running Logic Pro 9.  Just 3 tracks of drums and a few real instrument tracks.  Can't find a guide in the manual for either Kontakt or Logic.  Thanks in advance!

    Hi
    AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
    See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
    Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
    CCT

  • What setting should be used to make the smallest size quicktime video file.

    What setting should I use to make a small sized movie for my family that lives 1200 miles away. I am using the iSight with QT Pro 7.0.4 and will be emailing them via Apple Mail to my mom that uses the most current version of AOL for PC with a 1 Meg DSL connection. The reason I am emailing them is she does not have a camera to live chat.
    The first movie I tried was over 4 meg and these files have to go over the internet. It bounced back saying it was to big. It was only a minute long.
    Mac Mini 1.42 8X DVD+-RW Dual Layer 24X CD-RW 250 Gig Ministack Version 2   Mac OS X (10.4.6)   Apple Bluetooth keyboard 19" Nec VGA CRT Flat Screen 1 Gig Memory iSight

    Make your recordings and then open the QuickTime movie.
    Use the Share menu and choose the email small setting. You'll get an estimated file size in the dialog window.
    Your viewers must have QuickTime 7 installed to view these files.

  • HT4108 What is required to use the video composite out on the iPhone 4.  Left and right audio works ok

    What is required to use the video composite out on the iPhone 4   The left and right audio works ok

    Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

  • What setting for ipad2 full screen.

    I am creating an animation in blender for use on the ipad. The full retina resolution is too big to create an animation in a reasonable amount of time so ipad2 resolution will be fine. What setting should I use for creating a movie for use on the iPad2 full screen. Surely 1024 x 768 (as this is the screen resolution) but there is no available option that i can see.
    thanks
    matt

    matb1 wrote:
    … Still seems like there should be an easier way like a preset for the ipad or something.
    sure:
    create your 720p project
    drag your Blender stuff into it
    resize it to full screen
    share/Apple devices: iPad
    done
    best-practice would be to export from within Blender in 720p and drag resulting mov/mp4 into iTunes to sync with iPad … if you don't need any editing ........

  • Evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?

    evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?

    ''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
    ''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
    EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

  • I am looking for a high quality video converter from MTS or M2TS format to MAC...there are loads of softwares claiming they can do it but all turned out to be disappointing qualitywise...any idea?

    I am looking for a high quality video converter from MTS or M2TS format to MAC...many softwares claim they can do it but turn out to be disappointing (low quality...).
    Please advice if you know of any solution or serious test forums.
    Thanks!

    Also, you didn't say for what purpose you need them converted, but this thread might ofer a clue:
    https://discussions.apple.com/message/21389296#21389296

  • Image from a camera using a video converter to USB

    I tring to capture in my LabView app the alive image of a camera that is transmitted to a Tv tuner. I´m using a video  converter to USB (PC) I don´t need to process the image I just want to see the image of the camera alive.
    When I use a Microsoft LifeCam (usb) conected directely to the usb port I can see the image in my app.
    When I use Windows Movie Maker to see the image of my remote camera I can see the image alive.
    But, when I use my app with the remote camera it doesn´t work. I can´t see the image.
    My app is is attached bellow. As you can see I´m usig Imaqdx and LabView Fall 2011.
    Someone could help me?
    Thanks in a advance.
    Celia
    Attachments:
    CamTuner.vi ‏43 KB

    Dear Christian,
    I don´t know if my device is directshow compatible. May be not, because I tried to see the image using NI Measurement & Automation and I couldn't, besides the device appears in NI-Imaq devices list.
    But before this Labview app I made the one that is attached, using labview 8.6 and Imaq for USB. It woked right but because of the property page object every time the app ran a window was open and no matter was checked ok or cancel it worked in the same way. I thought using Imaqdx objects I didn't have this undesirable window. Do you know why it worked using Imaq for USB objects and it didn't using Imaqdx objects?
    Thanks in advance.
    Celia
    Attachments:
    CamImaqUSB.vi ‏43 KB

  • Panasonic camcorder HDC-TM90 any experience using Pavtube Video Converter with Final Cut Pro X

    Does anyone have any experience using Pavtube Video Converter with Final Cut Pro X for Panasonic camcorder HDC-TM90 shooting in 1080 P 60 ( mts file extension)

    Don't use these generic offbrand converters to get footage into FCP X. they re-encode your video and cause loss of quality. If FCP X cannot import your video then use a utility that simply re-wraps it into a quicktime file with no transcoding or loss. I prefer Clipwrap which works great and is updated frequently but there are free alternatives like Media Converter or Rewrap.
    But version 10.04 of FCP X should import it directly from camera as long as the folder structure is complete and you are not trying to merely import it from single mts files.

  • What is the best, safest MXF video converter for mac?

    I need to view MXF video files on my macbook pro. Wondering if anyone knows what is the best video converter to use for these files?

    Hi, I just got one recommended to you. It is iOrgSoft Video Mate. It can convert camcorder footages like MXF, AVCHD, MTS, XAVC, MOD, etc to regular video formats like MP4, MOV, 3GP, etc. I usually it to convert AVCHD files from my Sony cam. I think it works fine for me. You can have a try using it to convert MXF files.

  • What setting should I use to save file for upload to youtube

    Hi,
    the link below is the video on youtube that I just saved using the first setting that I always use using Flash.  Now because of the change over, as we have discussed I have to save the file then upload it for sites I upload to after the change.  I know I can save it on the For Windows one but it is not HD.  As you will see when you play this video it is all shakey (and not because I am shaking the camera   ).
    The other link is the non shakey saved for windows version.
    http://www.youtube.com/watch?v=lfjoqXIm2q0 Flash
    http://www.youtube.com/watch?v=i2OwQ3GTSPE (saved For Windows)
    Should I just resign my self to using the work around and use the save for Windows and not the FLASH.  or is there a setting I can use that gets rid of the shake.   However, since most of what I post is for people trying to sell their horses I would like the best quality I can get up on YouTube.
    Thanks for your help.  I really do appreciate it very much.  Saves me hours of time.
    Sarah

    Because YouTube is so unpredictable -- and always changing it encoding systems -- your best bet is to use the workaround and output as a WMV file.

  • Using AVS Video Converter 5.5 for DVD on iPod

    i just got AVS Video Converter 5.5 and converted my 'Scarface' DVD to MPEG format. i imported it to iTunes and tried to transfer it to my iPod and it says, "'Scarface' was not copied to the iPod because it cannot be played on this iPod." is it because it's MPEG format? i can convert it to MP4, is that what i should do?

    i figured it out =) has to be MP4

  • For people who use videora video converter

    is it just me or does anyone notice that the videos converted using this program are slurred.

    Then you might want to try something else...
    GUIDES TO: Converting Video for iPod - Mac & Window
    http://forums.ilounge.com/showthread.php?s=&threadid=123067
    Patrick

  • What is the best proejct setting for editing h.264 video?

    I have captured hours of VHS footage via an Elgato Video Capture device for Mac.   Captured video is in H.264 format.
    Trying to edit the video in Adobe Premiere Elements 10, but it is being very fussy.   Takes a long time to import media.  Once in and a few cuts are made, timeline drags and freezes repeatedly.   This was with a setting for HDV 720p 30.  
    Is my problem with the project setting?  I hope so.  But I also hope I can figure out what the proper setting should be.   Any thoughts?
    Footage is decades old.  Not the best quality, of course.  I do want the final project to look as good as possible and be in Widescreen for uploading to Youtube.

    Here are the propertites of the captured video:
    Format                           : MPEG-4
    Codec ID                         : M4V
    File size                        : 1.37 GiB
    Duration                         : 2h 1mn
    Overall bit rate                 : 1 613 Kbps
    Movie name                       :
    Recorded date                    : 2013-08-22
    Encoded date                     : UTC 2013-08-22 13:15:21
    Tagged date                      : UTC 2013-09-01 07:00:53
    Writing library                  : Apple QuickTime
    Cover                            : Yes
    stik                             : 0
    tvnn                             : S-Video Input
    iTunMOVI                         : <?xml version="1.0" encoding="UTF-8"?> / <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> / <plist version="1.0"> / <dict> /     <key>asset-info</key> /     <dict> /         <key>file-size</key> /         <integer>1467486295</integer> /         <key>flavor</key> /         <string>4:640x480</string> /         <key>high-definition</key> /         <false/> /         <key>screen-format</key> /         <string>standard</string> /         <key>soundtrack</key> /         <string>LC</string> /     </dict> /     <key>cast</key> /     <array/> /     <key>codirectors</key> /     <array/> /     <key>copy-warning</key> /     <string></string> /     <key>directors</key> /     <array/> /     <key>producers</key> /     <array/> /     <key>screenwriters</key> /     <array/> /     <key>studio</key> /     <string></string> / </dict> / </plist>
    Video
    ID                               : 1
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : No
    Format settings, ReFrames        : 3 frames
    Codec ID                         : avc1
    Codec ID/Info                    : Advanced Video Coding
    Duration                         : 2h 1mn
    Bit rate mode                    : Variable
    Bit rate                         : 1 499 Kbps
    Width                            : 640 pixels
    Height                           : 480 pixels
    Display aspect ratio             : 4:3
    Frame rate mode                  : Constant
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.163
    Stream size                      : 1.27 GiB (93%)
    Language                         : English
    Encoded date                     : UTC 2013-08-22 13:15:21
    Tagged date                      : UTC 2013-08-22 13:15:21
    Audio
    ID                               : 2
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format profile                   : LC
    Codec ID                         : 40
    Duration                         : 2h 1mn
    Bit rate mode                    : Constant
    Bit rate                         : 110 Kbps
    Nominal bit rate                 : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Compression mode                 : Lossy
    Stream size                      : 95.6 MiB (7%)
    Language                         : English
    Encoded date                     : UTC 2013-08-22 13:15:21
    Tagged date                      : UTC 2013-08-22 13:15:21

Maybe you are looking for

  • Simple Button Help

    Hi I am new to flash and having a bit of trouble. All I would like to do is be able to create a button and have that button navigate to a frame. What I am doing now is: Insert - New Symbol - Button and name the button (ex: about) Go through the up/ov

  • Connect a Microtek ScanMaker X6 EL scanner to iMac PowerPC G-4, 800 MHz?

    I have a Microtek ScanMaker X6 EL flatbed scanner which I want to connect and use with my iMac PowerPC G-4, 800 MHz computer. Since this scanner is no longer supported by Microtek, their Tech Support advised that I should try the software program Vue

  • How to declare data type for DATE format

    Hi, I need the data format in this format  DD-MM-YYYY HH:MI:SS So, I m using    select TO_CHAR(Date_Column, 'DD-MM-YYYY HH:MI:SS')  from dual; Now, In my procedure I need to assign this to a OUT  variable, what should be the Data type of out variable

  • Creating new business area from external database over dblink

    Hi all, I have the following configuration, ORCL - Database containing the EUL The EUL owner is BI_ADMIN. ADG - Database containing the objects and data There is a database link from ORCL to ADG using the username BI_ADMIN. Steps to recreate problem

  • Transparent video (with 3d model) output

    Good morning, Today I decide to give Photoshop CS4 extended a crack by working with a feature I was waiting on: better 3D controls and animation keyframing. I was easily able to open up the U3D file I was working with, get the animation correct, and