What setting in costumising determines Pickinng confirmation is mandatory
Hi,
Do let me know...What setting in costumising determines Pickinng confirmation is mandatory?
Hi there,
It depends on 2 factors:
1) in 0VLP, at the delivery item catg level, select the field "relevant for picking". This will make the item relevant for picking.
2) If the plant is warehouse WH managed, then you will need to create a transfer order TO to pick the quantity. Check in SPRO -> Entriprise structure --> LE --> Assign warehouse num to plant & storage loc. If your plant has a WH num assigned, then you will need to create a To to do picking. Once you create TO, you will have to confirm it in LT12. Else picking quantity will not be updated in VL02N. For this you will also have to define the source & destination storage bins.
If plant is not WH managed, then you will have to enter the pick quantity manually in a delivery. Else system will not allow you to do PGI (based on 0VLP settings).
Regards,
Sivanand
Similar Messages
-
What setting/application is causing N97 (20.0.027)...
Hello,
I have a Nokia N97 RM-505 black with firmware v20.0.27
Before updating to 20.0.27, I reset the phone with the so called 3 finger salute:
(shift, space, backspace, power button to start), then formatted mass memory, then deleted anything deletable
on c/e drives, then reset to factory setting, and applied 20.0.27 without problems.
I have a lot of applications installed on it, mostly free or purchased from handango
(I don't use ovi store since they don't let me download what I bought for backup).
It took several days to install the applications, I also downloaded a lot of maps to the phone,
as well as mp3s.
The phone worked beautifully, with all installed apps it had around 45MB free,
and responded reasonably quickly.
the problems started when I attempted to restart the phone, it got stuck on
the white startup screen with the blue nokia (so called white screen of death).
After having to do a hard reset and reinstall all several times (not fun),
I googled for a solution (removing/replacing batter and restarting didn't work
after hundreds of attempts. Finally I found a consistent workaround on this forum.
Namely:
1. Make sure phone is not fully charged (at most 2 bars)
2. Shutdown phone
3. Disconnect usb cable, and remove battery
4. Replace battery
5. Reconnect usb cable until you see not only the blue nokia but the animated charging icon on top
(you may have to disconnect and reconnect the usb cable several times for it to show up,
if you don't see it I found it helpful to disconnect the cable from both sides on subsequent attempts)
6. Once you see the charging icon, quickly press and hold the phone power button
(it may not vibrate like you're used to)
until you see the shaking hands connecting people animation and the phone starts
7. tada, you may now use the phone
If it wasn't for 1 downside, I could almost live with this workaround since I have chargers both at home at work,
the downside is that when you do this the phone will be stuck in portrait mode.
Keep in mind that even on 20.0.27 (in fact on all version of the firmware) and even
on the original store bought factory settings phone with nothing installed,
starting the phone while it's charging may cause it will sometimes get stuck in portrait mode.
(forcing you to restart after disconnecting the usb cable)
The difference is when using starting N97 while charging as a workaround for
the white screen of death issue, the phone is guranteed to be stuck in portrait mode,
instead of it only occasionally happening.
In any case, hoping to break the cycle, I took a full backup with ovi Suite 2.0.1.35.
(All checkboxes checked including applications and data).The backup is around 7GB.
I am hoping to do a hard reset (shift, space, backspace, power button),
then format mass memory,
then restore the backup in hopes that I will be able to boot up the phone
without it crashing.
I'm worried about doing this since I've never restored an ovi suite backup before,
I'm also worried because the ovi suite has been very poorly coded to begin with.
2.x is better than the prehistoric 1.X the phone came with
(try opening ovi app maanger on 1.x with 20+ apps installed)
but still even 2.x is beta quality at best,
and it returns strange error codes when i sync contacts.
I have the following questions:
1. Will following the above restore procedure restore all my applications,
music and map data ? has anyone tried it ?
2. There is a distinct possibility that the white screen of death issue will not be resolved
by the restore, in which case I badly need some method to determine what
setting and/or what application is causing the WSOD to begin with.
Preferably some sort of bootup or system log ? Is there even such a thing ?
Keep in mind that when the phone is turned off, and the usb cable is connected,
and the phone is charging mass memory is visible on the PC it is connected to in
windows explorer. Strangely, that is the only time when the sys/system/private
folder content are also visible.
In any case If I can determine what application (if any) is causing the issue,
I'd be happy to give up using it and uninstalling it,
(it beats having a $2000 brick).
3. Is there some method to apply the power on while charging workaround described above,
without having the device get stuck in portrait mode ?
I should mention I also opened a ticket with Nokia support with the same 3 questions,
but I have my fingers crossed, and expect them to simply ignore the questions,
and ask me to either reset it or take it back to the service center. I also requested,
that on some future firmware they consider having some key combination,
to allow starting the phone in (safe mode) with no extra apps or installations on bootup.
I also suggested a visible detailed. bootup log on the root mass memory folder to allow
troubleshooting such issues (if they're worried it can affect performance,
it can be enabled by an option). I don't expect either option to be implemented though.
Nevertheless I would say the WSOD is currently the number one problem with N97 today,
it's a complete showstopper.
The only other issue I suffered after the 20.0.27 upgrade was the stuck lock issue,
where if you click the power button,
and selct lock phone and keys, it is impossible to unlock the phone with the keyguard key on the side of the phone
(it just doesn't do anything). but that has a workaround (have someone call your phone,
then swipe the bottom line right to left to unlock (the top line left to right answers the call).
Cheers and if you've read all of this, thank you for your patience.
Hani
Solved!
Go to Solution.I think you may be referring to my workaround, as posted here (and various other forums):-
/discussions/board/message?board.id=smartphones&thread.id=179596
I've posted a few times about this. It's not an exact science, and having done it several times since this posting, I've realised that it is not necesary to actually "see" the charging icon. I really only mentioned it so you would recognise what's happening.
The fact is that, with the phone switched off, and then plugged into either the mains power supply, or the PC, by the USB cable, the screen on the phone shows white, as it starts to charge. Whether or not the "charging" icon starts to flash depends on the state of charge of the battery. If it is already full, then the white screen will go off after a while, as the phone doesn't need to be charged. If the battery needs charging, then then flashing icon will show.
This is all largely irrelevant . I only tried this "charging" thing in the first place to distract the phone from whatever problem is stopping it from going through its normal boot process. I thought if I could get the processor doing something else at the time I pressed the power button, it might just pass straight by the boot problem. Given the fact that it has been successful, my guessed logic seems to have been near the mark.
All this logic comes from many years of supporting PC systems. As has been said, this is only a workaround. The reason I've had to do this, is because I've had to do it many times since installing firmware V20.
Now, I have an unbranded UK model, code 0585162. I waited ages for V20, and, in the end, changed the code to get the euro V20. Since the UK V20 has been released, I've been wondering what the difference is, if anything, between the versions.
So today, as I do with my PCs every now and again, I had a good clearout of my phone, and rebuilt it from scratch, using the proper UK V20. I do this with Windows PCs every now and again. It gets rid of all the partially installed and uninstalled apps, temporary files, etc etc.
To prepare, I connected my phone to my PC via USB, and copied the whole of the E drive onto the PC. I gathered together all my downloaded .sis files, .wgz files etc, and made a list of all installed apps to make sure I had all the downloaded installation files.
I "backed up" my phone using PC Suite. I also use Ovi Suite sometimes, but I find PC Suite better, simpler, more technically reliable for "techy" tasks. When you do a backup, you are asked what you want to backup. Since all my music and photos are already on my PC, I don't need to back them up. Similarly my Contacts and Calendar are on the PC. For me the important thing to backup is my phone Settings. By only backing up the Settings, the backup is very quick.
Having made sure I had all my original stuff safely stored on my PC, I then reinstalled the Firmware release V20.
First I did factory reset *#7370#
Then I formatted the E drive.
Then I ran NSU to look for, then reinstall the UK V20 frirmware.
I then did another *#7370#, to be sure.
Then I restored the Settings from my backup
Then I copied the old E drive contents back from the PC (having deleted all the stuff I really didn't need)
And finally I reinstalled all my downloaded apps.
It's only been 24 hours, but so far my phone hasn't frozen at the white screen with the Nokia logo.
Fingers crossed.
As I said earlier, as with PCs, its good, every now and again, to reformat the hard disk and do a fresh install of Windows, then re-install your apps. My laptop seems to be slowly grinding to a halt, so I'm about to do the same for it.
More fingers crossed.
Message Edited by 2bad on 29-Nov-2009 09:55 PM -
Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?
Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system -
Can't print directly from web pages anymore-what setting needs to be changed?
After doing a recent update for the printer, the program jammed up and I was forced to uninstall then reinstall the printer. Since doing so, whenever I want to print a doc from a website, I right click to print, and a save page comes up-forcing me to save the document somewhere before I can print. I save to desktop, then can print from there. This is an extra step I never had to do before-could always print from the page. What setting do I need to change?
derbydoodle
Welcome to the HP Community Forum.
It sounds like the printer is not the "Default".
Print to Printer without First Saving to File
Not nearly as common, slightly possible, is that your browser is not picking up a properly set default printer setting.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
My husband and I share the same itunes account, but we are getting each other's photos on our phones. What setting will disable this?
turn off photo stream My Photo Stream FAQ - Apple Support
-
While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?
It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.
-
Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?
Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.
-
How do i get rid of a small box with AA in it on my main screen? cant figure out what setting it is on my samsung intensity ll ?
Good deal (the AA stands for Auto Answer, by the way; and I like your avatar )
-
Issue in setting IBASE component of service confirmation item
Hello Experts,
I am facing a problem while creating a service confirmation item with reference to Service order items. I am using CRM_ORDER_MAINTAIN
bapi. Issue is in the Ibase component of the service confirmation items as it is always taking the Ibase component of Confirmation Header even though
i am explicitly passing the Ibase component of service conf item of with IT_SERVICE_OS parameter. I am making sure that i fill up MARKED_OBJECT correctly.
in CRMD_ORDER i can see the Ibase component of header and item both but Header one is the marked as main reference object.
Any idea why Component can not be set explicitly for for service confirmation item.To achieve the above, try the below fix:
var buttonBar:ButtonBar = new ButtonBar();
buttonBar.requireSelection = true;
Hopefully this works for you . Cheers!! -
What setting should I use for Abbey Road drums? Getting a cpu overload issue
What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)? Getting a cpu overload issue. I have a macbook pro, 4 gb ram, running Logic Pro 9. Just 3 tracks of drums and a few real instrument tracks. Can't find a guide in the manual for either Kontakt or Logic. Thanks in advance!
Hi
AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
CCT -
I upgraded from iPhone 4 to a 5 and my emails have duplicated. Those I received and read on my Mac this morning have come in again and show unread so I have 2 of all of them. Any idea what setting is causing this? Thanks.
You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
What setting in Toast for creating a DVD-R master for replication?
I just Downloaded the new Toast 7 Titanium.
What setting should I use to burn a DVD-R to send in for replication?
Someone else said DVD-ROM UDF
There is also a "Make Video DVD from VIDEO_TS folder"
Which one?Sorry peeps! haven't looked here for awhile... (been really really busy...)
Don't use either of those options unless you know what you're doing and you know what dvdsp is doing!
If the dvd-r is for replication then you should check region 7 to make the disc region all. It used to be checked by default but is not any longer...! Then when you format set the Output Device to Hard Drive and the Output Format to .img
Now in Toast you select Copy>Image File. Burn two copies at as slow a speed as possible. It's worth knowing, some say that writing at rated speeds is best but from the many many times I've seen recordable media issues it seems that writing slower solves the problem more than the other way around!
Doing that will mean that your disc remains Region All, unlike if you use a Build to the Hard Drive and burn with Toast. You can control the burn speed & you don't have to worry about removing the .LAY, .layout files etc.
Some versions of Toast are helpful, version 6.0.7 or later has options which will remove any files that shouldn't be in the VIDEO_TS directory for you, makes sure an empty AUDIO_TS folder is included etc but that doesn't help you much if DVDSP doesn't let you control the region flags with Builds to the Hard Drive. Using an .img solves all that.
If you use the Data>Advanced>DVD-ROM (UDF) option you should use DVDAfterEdit or MyDVDEdit to correct the regions settings. Then manually remove the .LAY, .layout, PAR folder etc that should not be in the VIDEO_TS folder.
If you use the Video>Advanced>DVD-Video from VIDEO_TS folder you still need to correct the regions setting but Toast removes all the other 'stuff' for you and adds the (empty) AUDIO_TS folder.
FWIW, when you Format & Burn direct to disc out of DVDSP it does as it's told. The .LAY, .layout etc files are removed (see the log) and the regions ALL setting is as you'd expect.
More info:
http://www.dvdafteredit.com/?q=node/100
Apps:
http://www.dvdafteredit.com/?q=node/81
http://www.mydvdedit.com/
-Jake -
Document prints in reverse, what setting can I change to correct this?
Document prints in reverse, what setting can I change to correct this? Not a printer problem - documents print in correct order when using other programs. Using Acrobat X Pro on a Mac.
One more place to check. Open a document you'd like to print, then click the 'Printer...' button. Hit 'Yes' to the warning dialog box that comes up. For your specific printer, this might already be enabled. Change the drop-down menu that says 'Layout' to 'Paper Handling'. It could be that the Page Order preference has been changed here too. Just a thought!
-David -
I have JS where in from HTML input file type box, I pull the path of the image and then set it as src to image tag via javascript and display it on the same page for viewing.The same piece of code works fine in my office desktop FF 7.01 but it does not work in my local desktop computer when I download and install ff from mozilla.what setting should i change so that it displays my image in my image placeholder.
1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?
''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.
Maybe you are looking for
-
How can I compress the audiofiles on my hard drive as it is full.
I have just bought a Classic and have been busy converting my audiofiles to AAC files to sync to my iPOD. However, my hard drive is now full but I am under the impression that if I copy any files back to my external hard drive I will lose them when I
-
Exception message not thrown back to the page
Hello All, I have a servlet that listens for some data. Everything works perfectly if the data is intact. I do a whole bunch of processing on the data and verify its integrity etc... HOwever if something is wrong, my app throws an exception and I cou
-
Hi, Can you tell me ,when we park any document with any parked t.code , in which FI table it captures.Once posted then data captures in the table but before posting we want to know the table for parked document. Thanks, Dharmveer
-
Need a "stop scroll" on my ferris wheel?
Hi there! Can any one suggest how to stop the ferris wheel when the users mouse is off the area of flash content in the browser? Here is teh FLA file and the link to the page http://www.totalamber.com/test.html http://www.totalamber.com/flash/homepag
-
My IPOD is not connected but computer says it is
I had a IPOD nano 2GB but I decided to upgrade to an IPOD 4GB so I can play videos. So far I am not impressed with it. On my old nano it was very organized. I had 2 playlists and and audioobok category. On my new IPOD I have a million categories and