What setting or codec do I use for Capturing HDV 1080i HDV
What setting or codec do I use for Capturing HDV 1080i HDV
Not enough information. The settings you use depends on exactly what format you shot and what device you're using to capture.
Similar Messages
-
What's the best flash to use for nighttime sports games?
What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?
JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series.
Then you start looking at the battery packs. I recommend Quantum power packs
http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2 -
What is the best software to use for screen capture on a PC for use with FCPX?
What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.
I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck -
What settings do I need to use for an indoor basketball game?
What settings do I need to use for an indoor basketball game?
Sit as close to the game as you can possibly be. If you can sit on the ground on the sideline, do that. If you are closer, you can use a shorter mm lens setting, so you can use a less expensive and/or wider aperture lens. It can also mean a less-fast shutter to counter camera shake (though subject movement will still be an issue). It will also mean you can crop the photo less, which improves IQ too. It may also mean you can avoid the ugly part (the longest part) of a lens like the 70-300mm, and use the sweet spot instead.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"? -
What is "FND : Diagnostics %" profile option used for ?
What is "FND : Diagnostics %" profile option used for ?
How is it different from "FND : Debug%" profiles ?I guess my above update was misleading (Sorry for that) .. Please find below more details about (FND: Diagnostics) and (FND: Debug Log Enabled):
Both profile options are used to configure logging, the difference between them is (FND: Debug Log Enabled) is a database profile option used to configure logging while (FND: Diagnostics) is used to configure logging to screen.
Logging to screen provides:
- The ability to enable logging on a per HTTP request or per HTTP session basis.
- Dynamic configuration which does not require restarting any servers or changing any log profiles.
- A convenient lightweight mechanism to diagnose performance issues. Each message is timestamped to the millisecond.
If Logging to Screen is enabled, then the Java log messages generated for a particular HTTP Request-Response are buffered in memory and appended to the end of the generated HTML page.
This feature does not affect any existing configurations of file or database logging. File or database logging continues to behave per the configured middle tier log properties and/or log profile values.
Note that this mechanism currently provides only Java layer messages. Regular file or database logging should be used if messages from other layers (e.g., PL/SQL) are needed.
In brief ..
FND: Diagnostics (Self-Service) --> To see this, Login as that user and navigate to self-service, Click the Diagnostics link in the upper right corner
- Default = “No”
- Recommendation = “No”
- Requires APPS password to use Examine function
- Usually set to “Yes” during development -
How to set up set which NIC card to use for multicast?..
I just downloaded Rolling Patch 1 for WLS6.0SP2.
While reading the README file it says
" ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
Can anyone tell me how to set this?. on my WebApplication server it has two NIC
cards and I want to use the NICcard which is being used to talk to internal network
for multicast messages.
One more thing,
Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
place where I enter ISSUE number and should get the detailed description of bug/issue
etc..
Thanks for helping,
Nilesh
Thanks Kumar, I'll try this.
Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
used to talk to AdminServer?.
The other problem I am facing is when I restart the AdminServer in recovery mode
it's not finding my WebApp servers, because my webapp servers are on public network
and my admin (management) server is on private network.
please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
, for more details about my problem.
Thanks,
Nilesh
Kumar Allamraju <[email protected]> wrote:
><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
><html>
>You should be able to do it via console in 6.1
><br>Not sure if it was added in 6.0
><p>For 6.0 you can set this via command line
><br>java -Dweblogic.interfaceAddress=<addr>
><p>You need 6.0 SP2 RP1
><p>--
><br>Kumar
><p>Nilesh Shah wrote:
><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
><br>While reading the README file it says
><br>" ISSUE 42518: Provided a way to set which NIC card to use for multicast
>traffic
><br>"..
><p>Can anyone tell me how to set this?. on my WebApplication server it
>has two NIC
><br>cards and I want to use the NICcard which is being used to talk to
>internal network
><br>for multicast messages.
><p>One more thing,
><p>Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
>am
>looking
><br>place where I enter ISSUE number and should get the detailed description
>of bug/issue
><br>etc..
><p>Thanks for helping,
><p>Nilesh</blockquote>
></html>
>
-
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly
Hi all,
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
Help will be surely rewarded.
Thanks and Regards,
Creasy> What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
> Help will be surely rewarded.
&********************** Please read "the rules" if found usefull... ************************&
Cheers,
Julius -
What brands and type can I use for my iMac 20" internal Hard Drive?
what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
can I use WD caviar black?
is it too hot?If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
To answer your questions...
You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK. -
What is the logical system name used for in R/3?
We have a R/3 server. The production client has a logical system name. What is the logical system name used for?
Tony TamHi Tony
Following Links will help you in understanding the concept
http://benstudycenter.blogspot.com/2008/02/logical-system.html
http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
thanks
Bhudev -
What adapter do I need to use for charging my iPad in Greece?
what adapter do I need to use for charging my iPad in Greece?
The iPad charger can be used in any country.
it's rated 100V to 240V 50/60 Hz
You only need a plug adapter to suit the wall socket. -
What the "Local RTP Service" is used for in OWB 9.2.0?
What the "Local RTP Service" is used for in OWB 9.2.0?
Dmitry,
The Runtime Platform (RTP) Service is the server-side component of Warehouse Builder that provides execution and deployment services. For example, if the RTP Service is down you will not be able to start Deployment Manager and will get the error message to that effect. RTP Service is invoked through a database job that is automatically started when the database is started and shut down when the database is shut down.
It is also manually controllable through Start menu shortcut on Windows or start_service.sql / stop_service.sql in [OWB Home]/owb/rtp/sql
Nikolai -
What web service & xml will be used for deleting the packged epub/pdf file from Admin Console
What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
MangalHi Jim,
I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
Web Service & XML
http://myserver_url/admin/ManageResourceKey
<request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
<nonce>" . $nonce . "</nonce>
<expiration>'. $expiration .'</expiration>
<resourceKey>
<resource>resource_id</resource>
<resourceItem>1</resourceItem>
</resourceKey>
</request>
Error Message
<error xmlns="http://ns.adobe.com/adept"
data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
Magal Varshney -
What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.
tacbob wrote:
Are there any tutorials? I cannot find anything close.
http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
The MacBreak Podcasts are an excellent source of info!
Have a look on the others .. -
What is the 'add marker' feature used for in iMovie 10?
Can anyone tell me what the 'add marker' feature is used for in iMovie 10, I cant find any documentation on it anywhere, it doesnt even show under the help menu???
ray sharpe wrote:
Can anyone tell me what the 'add marker' feature is used for in iMovie 10, …
hmm… well observed!
In iMovie, markers are actually just… blue dots.
In its bigger brother, FCPX, markers are…
Markers overview
Markers are reference points you can place within clips to locate, identify, annotate, and navigate to specific frames. In editing, markers are particularly useful for synchronizing two or more clips at a specific point. For example, you can use a marker to label the frame where a door slams and then snap a sound effect to that marker. You can use markers to flag a specific location in a clip with editing notes or other descriptive information. When you add chapter markers to specific points in your project, viewers can use the markers to quickly jump to those points in the movie after it’s been exported or burned to DVD or Blu-ray disc. You can also use markers for task management.
Markers are classified as standard markers (blue), chapter markers (orange), to-do items (red), or completed to-do items (green).
so, maybe, this indicates some forthcoming features in iMovie (wohooo, speculation!)?
(iMovieX indicates some forthcoming features of next FCPX.1… but this is another story)
There's one meaningful use, which comes to my mind:
Edit to the beat:
While your project is playing, you can 'tap' onto the M key…
and not just 'per beat', but more like 'dancing', highlights, pauses, drama…
In a second step, you can use the dots, to find the perfect point for edit. -
HT1338 What anti-virus software shall I use for my Mac OS X 10.6.8?
What anti-virus software shall I use for my Mac OS X 10.6.8?
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac will NOT be infected by a virus, it may have other security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435
Maybe you are looking for
-
Reg: ALV (REUSE_ALV_GRID_DISPLAY)
Hi Experts, I need to know how to give drop down list in one of the field in my ALV. I found some posting in sdn, but that are related to OOPS concepts. But i am using REUSE function module. Can you please provide me the solution how to achecive drop
-
Can one use a samson USB with a 1/4" connector to fit in a regular mic in
i have the c03u can it be used with a specific type connector to make it 1/4" compatible? or is it just for computers usb in
-
Can someone please post the password for the following HP Mini 110
Customer brought in laptop and did remember the bios password. We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode. Can someone please post the password for the following HP Mini
-
Cluster services UNKNOWN state
Hi, I am having two node cluster database. I have some doubt If cluster services will go UNKNOWN state in first node existing connection will failover to second node? New connections will try to connect first node?
-
Can't Connect To Music Store...Tried Just About Everything
I can't connect to the Itunes music store. I have tried closing it and clicking it again, restarting my computer, and searching the support site for help. Does anyone know what I can do?