What settings are needed to playback HD through deck?

Can anyone assist with an issue of getting an HD project to playback through deck to external monitor? Standard definition works and plays fine but for some reason HD won't. Any ideas?
THX

I thought this was something not available for HDV projects without additional help from a Matrox or AJA card.

Similar Messages

What settings are needed to get iPhone to show in iTunes on Win 7

have a new iPhone 4S
Have d/loaded latest iTunes to my pc (Windows 7 Pro)
When I plug phone into pc iTunes does not automatically open (have checked Auto Play settings and there is no listing of the iPhone or iTunes)
so I open iTunes manually however am unable to get the phone to show up in the L.H.column.
Clearly the settings are not allowing this but I have no idea whatsoever about how to proceed as there is no indication of what is required.
Any suggestion?

Yes Ralph, of course tried several outlets (all working with other electrical appliances).
And yes, I did contact Apple ... I went through the long and nuisance process of actually getting to them ...
all the while chewing up my credit at a rate of knots and finally when I got someone and had once again (for pete's sake how often must we identify ourselves in one call?) given my particulars I was then told my credit card was needed before Apple would sent another plug.
1. Apple ought to know that one does not give out credit card details over such an insecure medium as mobile phone
2. the idea that I have to pay for a replacement plug after just forking out a bomb for a brand new iPhone 4S left me flabbergasted. I stopped the call and I think I felt a decision to never purchase another apple product.
I do hope someone from the Apple company reads these posts .... if so please convery to whoever that I am disgusted over the treatment I've recieved after this purchase. It was a big deal for me and there has been absolute zero joy in the aquisition.

What settings are needed for Flip 4 Mac to change frame size?

I just installed Flip 4 Mac Studio Pro so that I can make wmv files in different sizes. It works in 340x240 and 480x360, but freezes up when I choose the preset 384x288. Are there other settings that need to be changed to make this work. I thought this version of Flip would allow me to do most anything.
I'm exporting a short 4 min sequence from FCP using Quicktime conversion.

This will give you the instructions on how to set it up step by step.
http://community.virginmedia.com/t5/Email/Setting-up-access-to-Virgin-Media-NTLW ORLD-email-on-iPhone-or/td-p/883445

In idoc to idoc scenario what settings are must in target system

Hi all,
I need to transfer idoc from r/3 4.5 B to SNC system using XI idoc adapter.
What settings are must in target SNC(Suppy Network Collaboration) system for reiceiving IDOC in XML format.

Solved

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

What wires are needed to connect to a projector

What wires are needed to connect a macbook to a projector

A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.

HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

What steps are needed when upgrading from a pc to a Mac?

Copy everything from your old computer to your new one.

When dragging photos to desktop, what settings are used?

When a photo is dragged out of iPhoto and dropped anywhere in the Finder, what settings are used for that implicit export? E.g., what JPEG quality? It seems to export the full size.
Can't seem to find this documented anywhere!

In tests Old Toad reckoned that it was equivalent to about 8 on Photoshop's scale of 12.
Typically when I export via the file menu I select the highest quality. If iPhoto uses something less than that, then I'll stop dragging and return to the file menu export.
Doesn't quite work like that.
If you have an edited photo then there is a single generation of compression applied. If you export at any setting other than Maximum the file will be smaller. At maximum the file will quite likely be larger - less compression applied to the data.
As to which is best to use? Depends on what you're using this jpeg for - but remember this, exporting via dragging gets none of the metadata you've added in iPhoto (Keywords, Location, titles, descriptions etc)
Regards
TD

While doing ODI migration what things are needed to be setup in Topology?

While doing ODI migration what things are needed to be setup in Topology manager ?
1.Like in Toplogy in file we hive file paths.
2. In Planning we set Logical schema .
Not sure about other things.
Hoping some can can help!!!!!!!!!!!!!!!11

Lots of things are defined in the topology manager - below is a simplified list
1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
3) Contexts - how you asssociate logical and physical schemas
4) Agents - manage the execution of ODI jobs
When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

About AirPlay Mirroring in OS X Mountain Lion
You need:
An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
A suitable TV monitor
A network
HDMI cable
A compatible Mac:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

Can someone tell me what settings I need for ipad texting. Went to Mexico and now can't get the texting to work at all on ipad. Thanls

Can someone tell me what settings I need for ipad texting. I went to Mexico and when I returned the texting does not work on my ipad. The support at Apple wanted to charge me to get info.
THanks

Can't address the problem directly, cause even though my iPad4 is Cell+Wi-Fi, I've never put a SIM in it and never had the need to text, SMS or iMessage, from it. When away from the office or home wireless network, I tether it off the iPhone. Skype, both text and video, work just fine thru the Wi-Fi link, though.
HOWEVER, when I was hashing out the contract details to get the iPhone 5 about 14 months ago at Telcel, the representative distinctly mentioned that both Visual Voicemail as well as iMessages would be included in the package and they would be mandatory cause "I was getting a (subsidized) Apple iPhone" on a 24 month leash. Then when the gizmo came out of its box for SIM installation and activation, she went thru the motions of making sure both were working properly. So I assume the carrier has some say in the matter.

What settings are used to convert to pdf?

what settings are used to convert to pdf?

Hi geoffc39307434,
Are you asking what settings Adobe PDF Pack uses when you create a PDF file, or what settings you should choose in Acrobat when you create a PDF?
Best,
Sara

What commands are needed to configure authentication?

I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
Cheers

Sorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them.

What settings are needed to playback HD through deck?

Similar Messages

Maybe you are looking for