What settings do I set for

I have the N Airport connected to my cable modem. I have an Express "joining the n Airport"
But the Express doesn't get ip addresses from the Airport n. What set up do I need so the N Airport will distribut IP address to anything connect to the Express?

Are you having the Express just join the network or are you having it extend the network?
If it's just joining the network (as a client, not in a WDS configuration), the Ethernet port on the Express is disabled, so no devices connected to it will be accessible over the network.
If it's extending the network (WDS), you need to make sure that "Off (Bridge Mode)" is selected for the Connection Sharing setting in the Network pane for the Express.

Similar Messages

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

Hi gurus
In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
on a 64-bit Windows OS?
According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
"By default, the
Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
occurs."
Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
Thanks
Michael Brandt Lassen

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What is the default setting for amount of seconds between songs when burning an audio cd? I changed mine and my cds are all messed up!

What is the default setting for number of seconds between songs when burning an audio cd? (I changed mine and my cds are messed up!) Thanks!

What is the default setting for number of seconds between songs when burning an audio cd? (I changed mine and my cds are messed up!) Thanks!

What's the best setting for a best shades quality?

Hi!
I would like to know what are the best codec and the best setting for a video with 1920x1080 of resolution.
I've tried them all but nothing because the shades...are not shades.
I want a video that is like a uncompressed video but lighter. Same quality, same shades.
I've tried with Canopus Lossless but the video is darker and huge (7 min for >17 gb),
then with Canopus HQ, same quality but a little bit lighter (6 gb),
I've tried with all of codecs and settings but I haven't found what I want.
Who can help me for the best settings for the best shades?
Thanks so much.
P.S: Sorry for my english!

I used the PNG codec but the video is too big.
New Question: I've tried to encode the video with Canopus HQ but to 720p and now the video is more lighter, I wanted to upload it on YouTube but is not compatible with the standards.
If I encode this video by changeing the codec to Microsoft Avi uncompressed, can I have the same quality and the same weight?

What is best network setting for jetpack mifi 5510l

I live in a rural area with poor signal. No 4G and limited 3G. We got an antenna that boosts phones from nothing or 1X one bar to 3G and 2-3 bars inside the house. What is the best network setting for jetpack? It doesn't seem to work as well.
Automatic and 4g don't work. I don't know what CDMA Auto or EDVO stand for.
Any suggestions for improving strength would be appreciated. I know I won't get a great connection but a steady connection sure would be great.

> What is the best network setting for jetpack?
Not sure what you mean. The jetpack will automatically configure itself to whatever signal it currently has access to. Shouldn't have to configure any network settings.
> I don't know what CDMA Auto or EDVO stand for.
Those are the old 3G networks.
> Any suggestions for improving strength would be appreciated.
Perform what is known as a Site Survey and evaluate your current environment:
http://3gstore.com/page/13_will_an_antenna_help_me.html
After you generate some numbers then look up what they mean in the Interpret the Results tab. You mentioned that you already purchased an antenna so there may not be anything else you can do as the local towers in your area are not good enough to reach inside your home.

What is the mp4 setting for GoPro mp4 files?

Hi all,
I have edited GoPro mp4 1080-60 files that I want to upload to youtube.
Since it's consider the best for youtube, I want to keep the mp4 format. So I'm using AVCHD MP4-H.264 1920x1080 as output selection which appears to be a no brainer, but youtube rejects the file apparently, since the will only play at 380, max rez.
It's not really working. I thought it would be pretty straight forward as Gopro has to be very popular device.
What is the optimal mp4 setting for GoPro mp4 files?
Thanks
Den
PS Premiere Elements 13, PC on Win7 64

Dniss
It happens to all of us. We can upload our HD footage (example AVCHD/MP4 H.264 1920 x 1080p30) to YouTube, but
YouTube converts the video to a flash format and displays it in its default viewing setting which is not HD, typically
480p or less.
So, you or your viewer is going to have to set the viewing setting to HD before viewing your work in order to get
decent display quality.
ATR

What's the minimum setting for WL as a proxy server

What's the minimum setting of weblogic.properties for WL as a proxy server?

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What is the square setting for on the IPad camera?

What is this new setting on the camera used for?

Use the square setting when you want to take a square photo instead of a rectangular photo.

What is the best setting for previews in aperture for creating DVDs ?

Hi,
I would like to send clients DVDs of the photo shoots by dragging over the preview jpegs into iDVD. Not having a clue about the quality I should set for the previews [ in aperture preferences] could any one give some idea what preview size `I should be using for fairly decent quality. I should state I do not own a Television set and never will, so cannot test for myself. Seeing as widescreen is the most poular type of goggle box I intend to set IDVD to the widescreen dimensions.
Also does the size and quality of previews affect the overall responsivness of Aperture?

Congratulations on your avoidance of TV - I wish I could.
The most expensive High definition sets around at the moment have a resolution that can display 1080 horizontal lines, so anything greater than this would seem to be a waste.
Depending on who you believe the definition of "High Definition" as it refers to TV begins at 720 horizontal lines and extends up to 1080 lines. This is considerably less than what any half decent computer monitor can display.
If you set your previews to the one with an asterisk you will be perfectly matched to display fullscreen on your computer monitor, and as I said above this should be better than most TVs. If you set a step or two lower thaen you probably won't have any problems on most TVs.

What's the best setting for iPhone 4s video in Final Cut Pro 6

What's the best project setting in Final Cut Studio 2 for iPhone 4S 1080p footage?

Hi,
Convert your clips to Pro Res (LT if you have FCP7) with MPEG streamclip or similar and import to FCP.
Drag the first clip to the timeline and click ""yes" on the message that asks if you want to "change sequence settings to match clip settings". You're all set to edit.
DM

What is the correct setting for pictures to be used on T-shirts?

Hi everyone
Im trying to use some pics of mine, to be used on t-shirts, ive been trying to find the setting to correctly set it, so i can use em on cafepress.com to create a custom made t-shirt, the ones i have are either appearing too small on them or incorrect size etc, I have Adobe Photoshop CS5 downloaded, but i have no earthly clue on how to correctly edit the settings for em. While i know whats i know, i would really love it, if someone could please provide some help on how to do this, becuase i would really love to make a couple of t-shirts with my pics on them.
Thanks for all incoming help really ^_^
james

JamesW2010 wrote:
I use pics that i take within World of Warcraft, so i generally just take my own, i dont use the bad stuff
Well those screen shots are never going to look very good on a T-shirt print. You could upsize them in Photoshop but they will look rubbish.
Maybe you could get something better here: http://www.worldofwarcraft.com/downloads/wallpapers.html

What settings do I need for high quality web video?

I've created a video via animoto.com for my website. The video resolution they recommend for web is 432 x 240 @ 15 fps. I used this and it's not as crystal clear as I'd like. Still looks pixelated a bit and I'd like a higher def version. So I downloaded the hi res version (864 x 480 @ 24 fps). This looks great but takes forever to load due to buffering. Then the video stops every few seconds. I understand this res is not meant for web.
What is the resolution I need for best quality & fast loading? I've seen great videos on the web before that loaded very quickly. This is what I'm looking for. I have Quicktime Pro for Mac and can pretty much save in any formats & resolutions. So what's recommended?
Thanks!

Hi
There are some important things.
• Set down burn speed to x1. In iDVD08 You can do this in preferences.
• Use high quality media. I only use Verbatim
• Use right type of DVDs. I only use DVD-R (Single Layer)
• Best quality - I use Pro-encoding Quality.
• IMPORTANT: Secure a minimum of 25Gb free space on Your internal (start-up) hard disk
• Use a CD/DVD cleaning disk from time to time
• Don't burn more than three DVD at a time then let Your DVD-burner rest in 15 minutes to cool down.
Good Luck
Yours Bengt W

What's a good setting for my Firewall?

Running a Mac - do we need to buy into a internet security plan? And what are the differences in my Firewall settings? How dangerous is it to leave it on "allow all incoming connections"?

Catharsis wrote:
I guess I'll switch it to "allow only essential service" and see how "that behaves". Any suggestions, comments and advice will be greatly appreciated in regards to this setting.....
That setting is fine if you own just one computer and don't use a lot of network services.
I can't use that setting because I own several machines that I network, and use network services, like file sharing, chat, screen sharing, iTunes sharing, etc. so I can't have all those blocked.
I guess you'll have to see how it goes. If you don't run into any problems you can leave it on that setting.

Invoice list: What is the standard setting for output type LR00 ?

Hello all,
They have messed up our system. What are the standard settings for output type LR00 ?
Program RVADIL01,
Form ??
Thanks
Rad

Dear Rad,
> Program RVADIL01,
> Form - SD_INVOICE_LIST
Thanks,
Raja

What settings do I set for

Similar Messages

Maybe you are looking for