What shall I do after deleting the keyboard?

What shall I do after deleting the keyboard?
My original code of screen lock is English . Then I add a Russian keyboard in 'INTERNATIONAL' .After I reset my code in Russian, I found changing a keyboard before inputting the code of screen lock is possible. Today ,I deleted the Russian keyboard. Then the disaster has come cause that I couldn't unlock the screen lock. The Russian keyboard was just gone.
The only way to solve this problem is reinstalling system ?
Device: 5s , Software: IOS7.

Hello TTsad,
The only way to make it possible is making a restore of all your iPhone with the iCloud's backup or computer's backup... If you are have some technical difficulties the best way to do this is:
Put your iPhone in DFU Mode:
- Plug your iPhone to your computer.
- Power off your iPhone.
- Hold the power & home buttons at least 10 seconds.
- Now only hold the home button.
- Now it's on DFU Mode.
Restore the iPhone opening iTunes and when it finish the restore, login with your Apple account and it's done.

Similar Messages

  • After updating to IOS7 I changed my passcode to one in a foreign language, but I accidentally deleted the keyboard that the language uses and now I can't acess my Ipod becuase I I can't type in my passcode at all. What do I do?

    I changed my iPod's pass code to one that is in a foreign language, but I deleted the keyboard before I turned it off, and now I can't acess my Ipod because the keyboard option for that particular language is gone. What Do I Do?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this

    The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?

    Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.

  • I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

    I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

    That's probably a bookmark you have saved in Favorites.
    Tap bookmark icon>Favorites>Edit>Delete the bookmark

  • Sending email after deleting the records in a table

    Hi
    I am deleting the records in a table. After deleting the records,
    i want to send an email to another person. I am planning to follow this steps.
    1. Create a trigger on the table(AFTER DELETE ON table FOR EACH ROW)
    to copy the deleted records to temporary table.
    2. Read the temporary table and send an email.
    Is there any other way we can do with out creating temporary table ?.
    Govind

    I don't know what you plan to use to send the mail but here's a solution that would work.
    -- Create a send mail procedure
    create or replace procedure send_mail (
    sender      IN VARCHAR2,
    recipient   IN VARCHAR2,
    message     IN VARCHAR2)
    IS
      mailhost VARCHAR2(30) := 'localhost';
      mail_conn utl_smtp.connection;
    BEGIN
    mail_conn :=  utl_smtp.open_connection(mailhost, 25);
      utl_smtp.helo(mail_conn, mailhost);
      utl_smtp.mail(mail_conn, sender);
      utl_smtp.rcpt(mail_conn, recipient);
      utl_smtp.data(mail_conn, message);
      utl_smtp.quit(mail_conn);
    END;
    /-- Create the trigger to email deleted rows
    create or replace trigger email_del_rows
    after delete on <table>
    for each row
    declare
    msg varchar2(2000);
    begin
    msg := 'COL1  COL2  COMPANY NAME  DATE'||chr(10);
    msg := msg||:old.col1||'    '||:old.col2||'    '||:old.company_name||'       '||:old_date|| chr(10);
    msg := msg||'END OF FILE';
    send_mail('SENDER','[email protected]',msg);
    end;
    /You can make it look pretty but you get the basic idea.

  • Issue while playing the content of Azure Media Services after deleting the channel.

    Hi,
    We are having the issue while playing the content of Azure Media Services after deleting the channel.
    Please find detail scenarios below:
    We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
    it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
    We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
    created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
    We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available. 
    Can you let me know what might be the issue?

    Hi,
    Please refer to Justin’s blog and see if it helps:
    http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
    As suggested by Alex, please provide more information about your process of changing password.
    Here is an article for updating passwords on SharePoint 2010:
    http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • SERIOUS PROBLEM! I need to reinstall quicktime after deleting the .app

    I am trying to reinstall quicktime that came with my macbook pro, after deleting the quicktime.app file and the folders in the library.
    You might ask why I did this? I have quicktime pro to install, but it's version 7.1.1, and would NOT install over 7.1.2; I messed up though, I know that now.
    How do I fix it? Trying to reinstall quicktime 7.1.2 that I downloaded just crashes the installer.
    Thanks!

    No, I have not deleted the Quicktime712.pkg from Library/Receipts. Should I do this, or put the OSX disk back in the drive and then run the package that is in my Receipts folder?
    I run software update religiously, so I know that is not an issue.
    Thanks for the info, hopefully what I told you helps narrow the problem a bit.

  • I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be

    I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.

    Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?

  • When i click on a app it loads a little bit but then it goes back to home page what can i do without deleting the app?

    When i click on my app it loads a little but then it will go back to the home page what can i do without deleting the app?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

    I'm running windows XP using boot camp. What key do I push on the keyboard to bring up/go to my desktop?

    Have a look here http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
    Stefan

  • How to refresh after delete the records in ALV report ?

    Hi Friends,
    How to refresh after delete the records in ALV report.
    I am deleting records in ALV report .
    After successful delete the screen should refresh.
    u201C Deleted records should not appear in the screen u201C.
    Please guide me.
    Regards,
    Subash

    Hi subhash,
    FORM user_command USING r_ucomm LIKE sy-ucomm      rs_selfield TYPE slis_selfield.
    WHEN 'BACK'.
    Refresh the internal table from the ALV grid
          PERFORM update_alv_tab.
    ENDFORM.                    "user_command
    FORM update_alv_tab .
      DATA :  e_grid TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_grid = e_grid.
      CALL METHOD e_grid->check_changed_data.
      "update_alv_tab
      CALL METHOD e_grid->refresh_table_display.
    ENDFORM.                    " UPDATE_ALV_TAB
    Then see in Debug mode is it updating or not..
    Please confirm .
    And please paste the code if you can.
    Regards.

  • HT4897 I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?

    I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?
    I'm trying to make iCloud mail my primary email but I'm concerned that I may have lost the perfect email address forever.

    I have the same problem. After our wedding I've created an alias ([email protected]) to my actual AppleID Account ([email protected]). Now I'd the idea to delete the alias and my actual AppleID to create a new AppleID with ([email protected]).
    Is there really no possibilty to do this?
    Thanks in advance for quick and positive feedback.

  • Junk mail returns after deleting the item in the "Junk mailbox" and "Trash".  Is there a way to permanently block the sender?

    Junk mail returns after deleting the item in the "Junk mailbox" and "Trash".  Is there a way to permanently block the sender?
    I have deleted the item multiple times both on my Mac mini and my touch and 5 minutes later it is back in my Junk mailbox.  The item will not return to the Junk mailbox until it is deleted from the trash.

    You can create a Rule
    http://email.about.com/od/macosxmailtips/qt/How_to_Block_a_Sender_in_Mac_OS_X_Ma il.htm

  • What does it mean by deleting the Content of the setup table when LO cockpi

    Hi all:
        what does it mean by deleting the Content of the setup table when LO cockpit ? why should we do it?  why set up tables ?
    Thank you very much!!!
    Edited by: jingying Sony on Jun 7, 2009 4:46 AM

    Hi Jingying Soni,
    Data sources in LO cockpit have a seperate exctraction source during full update mode and delta update mode.
    During delta update mode(when an transaction is posted in any particular application - like SD - sales orderm delivery) data is posted in application tables and updated alongside to the update table/extraction queue.
    From the extraction queue this data is further transfered to the delta queue using periodic background jobs.The data is then upladed in BW. The delta lad always reads data from this delta queue.
    However, when a full load is requested from the BW, the data is sourced by the set up table of the corresponding application.
    The setup table is loaded/initalized first. In this initialization process , it reads data frm the corresponding application tables and stores it within this table. Later BW reads from this set up table whenever full/initial load is requested.
    The process of filling set up able before full load request frrom BW is called set up run.
    Before you run a set up to fill the set up tables you need to check that the set up table is empty.
    If it is still containing data that was previously loaded in some other set up run. This data will als get loaded in BW unitinetionally/accidentally.
    So, you need to ensure that you only get the intended data in BW. This can be done by proper selections to transfer data from application tale to set up table and from setup table to BW.
    Along with this you hae to ensure that the set up table is either empty or you are using a disparate selection in the set up run and BW load which does not overlap with the previous set up runs data.
    Hope it helps,
    Best regards,
    Sunmit.

  • TS1702 I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3. However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via e

    I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
    However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
    Installation was rejected because I need the iOS.4.3
    Thanks for your help
    Michael

    That situation went from inconvenient to complicated quickly.  Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled.  I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned.  Sorry this happened the way it did.  Definitely not efficient.

Maybe you are looking for