What shall I do when it is Showing an error when trying to update software ?

How do I update software when it comes up that there is an error?

Then Connect to iTunes on the computer you usually Sync with..
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Similar Messages

  • Can not change AppleID when trying to update software

    Hi!
    I've bought a Imac and trying to update iPhoto og iMovie, but the software update will not let me use my own AppleID to install the updates. Instead there is shown the AppleID from the shop where I bought the computer. Anyone know the solution to change the AppleIDs?
    /Thomas

    slfcaj wrote:
    When trying to update software it says You need 5.95 GB of available space to download and install the updates. To increase available space, remove files from your startup disk, and then try again.How do I do this?
    You need to either delete unnecessary files or move them to an external hard drive.
    The updates indicate I wouldn't need nearly that amount of memory why the discrepancy?
    Post a screen shot of the updates your are trying to install.  I don't know what would be causing the discrepancy.

  • I am getting error message 3194 when trying to update software.

    I am getting error message 3194 when trying to update software.

    Security software issues perhaps, look here for help.
    http://support.apple.com/kb/TS3694#error3194

  • HT5457 When trying to update software on my iPad2, I don't have the option in General, Settings, Software update! Any ideas?

    When trying to update software to ioS5 on my IPad2, I have gone to, Settings, General, but no option appears to update the software. any ideas?

    A second generation iPod touch can’t be updated past 4.2.1.
    (118283)

  • Error message when trying to update software?!

    Just got my Mac Book Pro and am trying to run software updates for:
    iTunes (11.0.1),
    MacBook Pro (mid 2012) Software Update (10.7.4),
    Remote desktop client update (3.6.2)
    and Mac OS X 10.7.5
    The software downloads and comuter does the restart and loads the staus bar right up then just says: "An unexpected error occured, none of the updates have been installed."
    WHAT DO I DO? have tried 4 times with the same result.

    Welcome to the Apple Support Communities
    I have seen this problem before. Select only "Mac OS X 10.7.5" to install. I can see that OS X wants to install a 10.7.4 and a 10.7.5 update at the same time, so they can be in conflict and the installation may fail. After installing OS X 10.7.5, the 10.7.4 one shouldn't appear, so install the other updates

  • Help!! Sync Problem Only When Trying to Update Software on My 755p

    I am trying to update the software on my 755p.  I am syncing with a usb.  The sync goes fine when I do a hotsync, but when I try to run the updater for the palm software, it keeps telling me that the "Device Connection Failed."  It tells me to connect the cable, but it is connected and I know it works, cuz I just hotsynced!  very frustrating.  An hour on the phone with Verizon did not help.  I reinstalled the latest Palm Desktop, still no help.  Help??!!
    Post relates to: Treo 755p (Verizon)

    Hi, and welcome to the Palm Community Forums.
    There are some FAQs which address this error: http://kb.palm.com/SRVS/nua/launchKB.asp?c=9205
     including rebooting your PC and soft-resetting the handheld, and the alternative of installing via SD card.  Go to the Update page (link below)
    http://kb.palm.com/wps/portal/kb/na/treo/755p/verizon/solutions/article/9042_en.html
    and select the option near the top where it says Need Memory Card Installer?  Let us know if this helps.
    Message Edited by smkranz on 04-27-2009 12:30 PM
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Itunes shows error message when trying to update software

    I have updated my laptop and itunes. I have had an issue with my phone connecting to any new wifi as well. I have also reset my phone.

    so the error looks like it happens when you try to back up your phone.
    try this help link /
    iOS: Troubleshooting backup issues in iTunes

  • System error when trying to update software

    Hi please help me ... why is a system error only comin up when i tryin to install updates for iphoto etc

    You do not have enough hard drive space to install all those applications.  Reason why you are unable to install.
    You need to first do some serious housekeeping.  So forget what I said previously for the time being.  First things first:  Make room!
    ================
    Empty the trash! 
    Open up your application folder & go through all your apps.  Trash all the apps you no longer want and/or use.
    An easier way to do this is to open the Application folder in list view & press the [b]Command+j[/b] keys.
    In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box. Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
    Get rid of all your photo files you don't want and/or need.  Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.).
    Get rid of all your music files you no longer listen too.  Especially, if you already have the actual CDs and/or DVDs or you can later redownload from a website.
    Use Spotlight to make sure you got rid of everything.  You can even trash directly from Spotlight!
    Drag what you don't want and/or need to the trash.  Better yet, download this neat little shareware app *demo* called AppZapper.  It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
    Another software that does the above is AppDelete.  Best of all this software is *free*!
    Burn what you want and/or need onto CDs or DVDs.
    Not everyone has the  luxury of purchasing an external HD to store their "stuff, junk, music & photos".
    You can check with your ISP to see if they offer *free* storage space.  Most if not all do now-a-days.  I store all 5000+ of my music & 500+ music videos in my ISP storage bin. There are thousands if not millions of *free* storage facilities on the web also.  Use your favorite search engine, to search them out as they come in different storage sizes to fit your needs & wants.
    Check for duplicate fonts.
    Applications>Font Book
    Select “All Fonts”
    If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
    To clean this up, select a “black dotted” font or the Apple + *click* to select multiple dotted fonts;
    Edit>Resolve>Duplicates.
    What the above does is turns off the duplicates & multiple version fonts.  Not delete them.
    More than likely the “extras” were installed by other programs and/or other users.
    Clear out font caches
    Use FontNuke.  It does all the work for you.  And, best of all it’s *FREE*.
    Printer Drivers
    Get rid of all the printer drivers you don’t need & use except the ones for your *current* printer(s)/scanner(s).
    HD>Library>Printers Folder
    If you accidentally threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
    Garage Band
    Has about 1GB of loops stored.  Get rid of some some them.  You surely don’t use, like and/or need them all.
    HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
    Or just get rid of the Garage Band app altogether if you don’t use it.
    Get rid of extra languages
    Strip your computer down to your “native” tongue. You can do this with a *FREE* utility called http://monolingual.sourceforge.netMonolingual.  Another app that apparently does all the work for you.  I’ve never used it.  However, a lot of users here swear by & recommend it highly. However, there is a warning for *native English speakers*.  Make sure you keep BOTH English and English (United States).
    Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.
    ====================
    After you make room on your HD, try updating from SU again. 
    For repairing permissions, detailed instructions are in the OS Help menu. 
    Short version:  Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.

  • Ipad mini has frozen when trying to update software, saying connect to itunes but itunes won't allow update or a reset

    help!
    I clicked on the software update for my ipad mini.
    I now have a screen that says I need to plug into i tunes.
    When i did this itunes says that the ipad is in recovery mode and cannot be updated
    i have tried to reset but it just keeps saying unable to do so and error 3194 has now started to appear

    You can't update to iOS 7.1.1, you can only update to the current version i.e. 7.1.2
    Error 3194 : Error 3194, Error 17, or "This device isn't eligible for the requested build"

  • Error 1611 when trying to update software

    When I update my iPhone on my pc I am given the error 1611. I can update the phone on another computer but when I try to update on the same computer again it is impossible.

    Welcome to the Apple Support Communities
    I have seen this problem before. Select only "Mac OS X 10.7.5" to install. I can see that OS X wants to install a 10.7.4 and a 10.7.5 update at the same time, so they can be in conflict and the installation may fail. After installing OS X 10.7.5, the 10.7.4 one shouldn't appear, so install the other updates

  • Network Error when trying to update software

    I get new software notifications (safari, itunes, Mac os etc) but when I try to install I get the below error.
    'A network error has occurred: cannot open file (-3001). Make sure you are connected to the internet and try again'.
    The thing is my internet is working fine and I have tried rebooting numerous times but still get the same error. I was able to get round this for the safari update by downloaded directly from the apple website but would really like to get it sorted so I can download all the regular updates.
    You advise will be much appreciated

    I was having the same issue.... I could connect to the Internet without any problems using Safari, but Software Update could NOT connect, and reported the same network error Chidstar is getting.
    I rebooted, tried another user account - nothing helped. Then, I tried again out of sheer desperation an hour later, and Software Update worked!
    Now I wonder if it was just timing out too soon on the previous occasion... perhaps due to a slow network connection earlier in the day?
    Chidstar - I wonder if deleting your cache files might help? See this note: http://support.apple.com/kb/TA23407?viewlocale=en_US

  • NSURLErrorDomain-1005 when trying to update software

    I have twelve MacBooks all running OS X 10.4.11 in my classroom. I need to update them all. SU repeated gives me this:
    "A networking error has occurred:
    Error NSURLErrorDomain-1005 (-1005).
    Make sure you can connect to the
    Internet, then try again."
    Well, I can connect to the Internet so that isn't the issue. Over lunch, I tried updating my flat panel iMac running 10.4.11 at home, and it worked perfectly. So far, two of the MacBooks have behaved this way. This is not a permissions issue (but yes, I've repaired permissions and checked the disk for failures...nothing turned up). I've deleted plist files and that didn't help. This is not a corrupted disk issue. I've scoured this forum and used Google to try to find an answer, but no one seems to have found a definitive fix for this. Is the only workaround installing the updates manually? That's going to be tough for twelve computers and classes beginning on Monday. Upgrading to Leopard is not an option.
    Any suggestions that don't involve repairing permissions?

    Joe Heafner wrote:
    … does this mean that Software Update is officially fried on these machines from now on?
    No. It is just that if you have a dubious connection it is better to do the download under your control and check it properly. There is still the same probability of the connection being dropped, but you can retry, perhaps at a less busy moment.
    After manual download, be sure to verify the digest:
    Mac OS X: How to Verify a SHA-1 Digest
    Mac OS X: About SHA-1 Digest and Software Downloads
    (This is done automatically when you use Software Update).

  • Why is my MacBook Pro coming up with an error message when trying to update Software?

    I brought my MacBook Pro today and I have been trying to carry out the software updates, there are 9 in total. It takes about half an hour to download them all, then it tells me to restart. Once I have restarted, it then says it is installing the updates. After a minute it comes up with an error message. It then tells me that one or more of the files downloaded are corrupt!! Why is this happening as I have not done anything else with the laptop since I brought it??

    Just re-download the updates via Software Update or you can download standalone updaters from support.apple.com/downloads/.
    If you are on a slow connection it's probable that caused the corrupt files problem.

  • My iphone 4s got the error 11 when trying to update software while in itunes help!!

    Help!!!!!    While trying to update my iphone 4 in itunes, it crashed and i got the error message 11!!! Nothing is happening, it won't restart, I can't turn it off.  Nothing will recognize it!!!

    It is an entry in the Hosts file. It is not a file.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.

  • HT1600 "The update was not successful" when trying to Update Software on my Apple TV

    After downloading for 40+ minutes, it went into step 1 and came back with "The update was not successful".  I have it connected via network cable and not wi-fi.  Is there another way to update that will get me from 5.0.2 (4250) to version 5.1?
    Thanks in advance.

    Hi,
    same storry here.
    I was renting a movie yesterday with  my iPad2 (iOS 5.1) - wanted to AirPlay the video stream from iPad 2 to AppleTV 2 (has the latested OS installed on it) - AppleTV says "not authorized"...
    Tried also everything (e. g. reconnected AppleTV to my ITunes-account..) - nothing worked.
    I AirPlayed a lot of rented movies from ITunes-store over my iPad2 to my AppleTV 2 in the past without any problems....
    I have no idear why this happens now...
    I was also functioning perfect after the recent iOS-update on both devices. So no connection to the new iOS...
    Regards,
    Robert

Maybe you are looking for

  • How to display Barcode in RTF ?

    How to insert Barcode for the item in RTF using BI Publisher in Ms word. I did like below <?format-barcode:*Item*;Code128a;XMLPBarVendor?> But in the output Barcode is not displaying for that item.

  • Goods receipt for sales order (sample for inspection)

    Hi Experts Is it possible to enter goods receipt for a sales order? This process is required for collecting sample from customer for carryingout testing of the sample. Please suggest the doc types and process steps. warm regards ram

  • Payload is not visible in sxmb_moni

    Hi friends, when i send payload from RWB, i am getting success in RWB but when i see that payload in sxmb_moni, i could not see my payload in main document ..only in attachment i could see that paylad. could you give some idea what could be cause for

  • XSLT Issue with Apostrophes

    I have a service that reads information from a database and uses the Query Database for Multiple Rows to XML component.  The next step in the service is an XSLT that essentially removes all the type="VARCHAR" attributes that the component adds. We be

  • Maintian Port/Partner details in XI

    Hello Friends, In XI where i need to maintiant he Partner Detaila, Port Details..is it in IR or in ID. Please suggest and alos proivde the steps to do that. Thanks in advance! Best Regards Prasad