What shall I do with my project created under Labview 64bit?
Since I start to use a new PC with Windows 7 x64, I start to built my project in labview x64. It was more than a year ago, and the project involvoes some cameras, IO board, etc.
There were troubles, such as some devices that I use labview to control don't have x64 drivers or the drivers didn't work properly; however, I manage to make my system work till this moment that I need to embed some Matlab scripts in my project and we just paid for the Mathscripts, but I suddenly realised that Mathscript doesn't support LV 64 bit.
So, the questions are
1. Can I use Mathscripts under LB 64 bit?
2. Even if I can, is that a good idea to stick with lv 64 bit with all those peripheral driver troubles?
Alternatively, shall I migrate to 32 bit LV, I just try to open my project with 32 bit LV 2011, there are lots of missing VIs. It seems I have to spend some time reconnect hundreds of VIs and other unexpected issues?
Either way, I need to spend some time on NOTHING?
Could anyone who has some experience on this issue shed some light on me??
Thanks.
Solved!
Go to Solution.
Ravens Fan,
Thanks. This sould like a good approach for my current issue.
But, do you have any general opinion on the 32/64bit LV? Since I start using the 64 bit LV, I had quite a few problems only due to the 64 bit compatibility.
Is it a good idea to keep on the 64 bit track? At the end of the day, how much benefit I gain from using 64bit LV? Is it much faster? I could run a comparison after I make the 32 bit program work, but it's good to hear some other's opinions. One contact of ours from NI told me it's better to use 32bit. What do you think? Thanks.
Similar Messages
-
I just created my 1st travel expense report - Now what shall I do with the original paper?
Hello,
I just created my first travel expense report. The original paperwork (e.g. from hotels) had been photographed and assigned as expenses. One question: What shall I do with the original papers? Can I throw them away (which I hope). Or is there any legal / tax-related duty to keep them (which would be stupid).
- WolframHi Wolfram,
This community is used by all Cloud for Travel and Expense customers, and each customer's travel policy varies. Please refer to your travel department's policies to confirm what you should do with the paperwork.
Thank you! -
How do I get my Mac to recognize external drive filled with 5 projects, created at Apple Store?
How do I get my Mac to recognize external drive filled with 5 projects, created at Apple Store? I created 6 hrs worth of projects on computer in apple store with my external. came home my computer did not recognize it at all. went back to apple, they said oh click the news reel bottom left that will do it, came back home and nope....not recognizing it, in fact it says no events exist on this disc. I want to get the 5 projects and put up on vimeo tonight. ugh.
Hi Tom,
I'm so impressed with how you help everyone solve their problems. I will do my best here, but my husband will be home soon and knows how this large external is formatted.
How late do you all work there? I'm on east coast. Is the screen shot you wanted? I opened up external and
this is what I see.
Drive is connected to usb in back of computer. N -
Hi there,
On my iMac from 2009 - 3,06 Ghz Core 2 Duo with Mac OS X lion 10.7.5 (11G63) I'm having the iPhoto (8.1.2 version) making auto-shutdown with no reason;
Does anybody know what shall I do with it ???
Regards,
Miguel Sim.Hello again,
Process: iPhoto [2771]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1.2 (8.1.2)
Build Info: iPhotoProject-4240000~8
Code Type: X86 (Native)
Parent Process: launchd [141]
Date/Time: 2013-11-14 18:53:17.814 +0000
OS Version: Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report: 106324 sec
Crashes Since Last Report: 2
Per-App Interval Since Last Report: 634 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: 637A60DB-E15A-441E-BAAB-F21EF18FA1B6
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x000000000cfbc000
VM Regions Near 0xcfbc000:
JS JIT generated code 000000000cfb4000-000000000cfbc000 [ 32K] rwx/rwx SM=PRV
--> mapped file 000000000cfbc000-000000000cfcc000 [ 64K] r--/rwx SM=COW /Users/USER/Pictures/*/*.jpg
TC malloc 000000000cfcc000-000000000d0cc000 [ 1024K] rw-/rwx SM=PRV
Application Specific Information:
objc[2771]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_c.dylib 0x9144ebe1 memmove$VARIANT$sse3x + 35
1 com.apple.ImageIO.framework 0x99396ca0 _CGImageSourceBindToPlugin + 300
2 com.apple.ImageIO.framework 0x99396b63 CGImageSourceGetType + 55
3 com.apple.CoreGraphics 0x939bdc4c CGImageCreateWithJPEGDataProvider2 + 166
4 com.apple.CoreGraphics 0x939bddc4 CGImageCreateWithJPEGDataProvider + 47
5 com.apple.iPhoto 0x001aa38e 0x1000 + 1741710
6 com.apple.iPhoto 0x0043d5a6 0x1000 + 4441510
7 com.apple.iPhoto 0x00448902 0x1000 + 4487426
8 com.apple.AppKit 0x9494f79d -[NSView _drawRect:clip:] + 3929
9 com.apple.AppKit 0x9494d7bc -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 2650
10 com.apple.AppKit 0x9494e193 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5169
11 com.apple.AppKit 0x9494e193 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5169
12 com.apple.AppKit 0x9494e193 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5169
13 com.apple.AppKit 0x94947caa -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4817
14 com.apple.AppKit 0x94940bd9 -[NSView displayIfNeeded] + 1365
15 com.apple.AppKit 0x94945872 -[NSClipView _immediateScrollToPoint:] + 6543
16 com.apple.AppKit 0x94943e2e -[NSClipView scrollToPoint:] + 234
17 com.apple.AppKit 0x94a34137 -[NSScrollView scrollClipView:toPoint:] + 279
18 com.apple.AppKit 0x94a33efb -[NSClipView _scrollTo:animateScroll:flashScrollerKnobs:] + 1533
19 com.apple.AppKit 0x94a3711c -[NSClipView _scrollTo:animate:] + 62
20 com.apple.AppKit 0x94a370d4 -[NSClipView _scrollTo:] + 48
21 com.apple.AppKit 0x94a3709b -[NSClipView _scrollPoint:fromView:] + 107
22 com.apple.AppKit 0x94a37029 -[NSView(NSPrivate) _scrollPoint:fromView:] + 50
23 com.apple.AppKit 0x94a36fef -[NSView scrollPoint:] + 65
24 com.apple.iPhoto 0x001c08e4 0x1000 + 1833188
25 com.apple.iPhoto 0x001bff5b 0x1000 + 1830747
26 com.apple.AppKit 0x949d1508 -[NSWindow sendEvent:] + 9384
27 com.apple.AppKit 0x94969f77 -[NSApplication sendEvent:] + 4788
28 com.apple.iPhoto 0x00229973 0x1000 + 2263411
29 com.apple.AppKit 0x948fbb21 -[NSApplication run] + 1007
30 com.apple.AppKit 0x94b8cac5 NSApplicationMain + 1054
31 com.apple.iPhoto 0x00124b80 0x1000 + 1194880
32 com.apple.iPhoto 0x00003172 0x1000 + 8562
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x9982ab5e __select_nocancel + 10
1 libdispatch.dylib 0x9c80bcbd _dispatch_mgr_invoke + 642
2 libdispatch.dylib 0x9c80a853 _dispatch_mgr_thread + 53
Thread 2:: Dispatch queue: CFPreferences Background Sync Queue
0 libsystem_kernel.dylib 0x9982a71e __open_nocancel + 10
1 libsystem_c.dylib 0x914c643d _gettemp + 554
2 libsystem_c.dylib 0x914c65df mkstemp + 32
3 com.apple.CoreFoundation 0x9685fc06 -[CFXPreferencesPropertyListSourceSynchronizer writePlistToDisk] + 1366
4 com.apple.CoreFoundation 0x968243a3 -[CFXPreferencesPropertyListSourceSynchronizer synchronizeAlreadyFlocked] + 595
5 com.apple.CoreFoundation 0x968240fa -[CFXPreferencesPropertyListSourceSynchronizer synchronize] + 522
6 com.apple.CoreFoundation 0x9686750a __-[CFXPreferencesPropertyListSource synchronizeInBackgroundWithCompletionBlock:]_block_invoke_1 + 122
7 libdispatch.dylib 0x9c809fbd _dispatch_call_block_and_release + 15
8 libdispatch.dylib 0x9c80b943 _dispatch_queue_drain + 224
9 libdispatch.dylib 0x9c80b7e8 _dispatch_queue_invoke + 47
10 libdispatch.dylib 0x9c80aff0 _dispatch_worker_thread2 + 187
11 libsystem_c.dylib 0x91478b24 _pthread_wqthread + 346
12 libsystem_c.dylib 0x9147a6fe start_wqthread + 30
Regards,
Miguel Sim -
My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?
What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564 -
I `ll get a new pc...what shall I do with my licenc-number of PS CS4?
I`ll get a new pc.....what shall I do with my licenc -number of CS 4? Can I transfer it easely?
Based on the title, I would have Moved the post to the Photoshop>General Discussions Forum, but would also have taken credit (or blame) for the Move. As the OP has gotten the answer, I am not sure if a Move now is warranted, but maybe so? If Pat saw it elsewhere, not sure how it did get here???
Now, some posts do defy logical moving, as it's impossible to tell which Adobe product is involved. Also, some of the Adobe Forums can be very confusing - I always struggle with which Acrobat sub-forum would be best. I am sure that I guess wrong quite often, and only hope that one of the Acrobat MOD's will correct my error. At least they know who to blame! Also, I usually PM the OP, to let them know where their post went, and why.
Hunt -
What shall I do with these datasources
I'm working on infocube 0pp_c03 and the datasources which go with it are 0pp_wccp, 2lis_04_s281, and 2lis_04_p_arbpl and I'm not able to find them in rsa6, and I therefore can't find them in rsa5. So what shall I do inorder for me to install them into bw...
Thanks,
CalvinJust a thought here > Apple Recycling Program
-
Problem with running a program under Labview 8.6
Hello,
I am writing you this to ask for your technical support to fix the problem I am facing at our Lab at University of California, Irvine.
Ms. Vanessa Trujillo has kindly come to our lab a couple of times and tried different things to resolve the issue, but unfortunately the issue is not resolved yet. Here is a summary of the problem:
We used to use Labview 6.1 for our fatigue testing and data acquisition.
Our
program worked just fine under the 6.1 version We recently upgraded our software to Labview 8.6. We have also purchased a new computer that has higher capacity than what your website requires for Labview 8.6. The new computer has Windows Vista We transferred our old program/subprograms from the old computer under Labview
6.1 to the new computer with labview 8.6. However our program that worked fine with the 6.1 version is not working with the updated version (ver 8.6).
There
are 6 errors in the error list. It appears there are six files of my program missing under the new version, even though we transferred all files.
The software searches for those files but can't find them.
For example one the box pops up indicates:
loading:
<vlib>:\Daq\lvdaq.dll
searching:
C:\Program Files\National Instrument\LabVIEW 8.6\instr.lib\Agilent34401\public\utility
I get several message like this. I have to cancel/ignore them all to be able to open the program.
When we go to VI's under Measurement I/O there is nothing (empty).
We use a PCI-MIO-16XE-50 for our data acquisition During Labview installation on the new computer, I was asked if I wanted to install the device drivers. I had two options, "Now" or "Later", I picked Now but I didn't have the DVD's/CD's for the device drivers. Therefore I had to select later to complete my software installation Later after Labview 8.6 installation, we installed the device drivers (traditional Ni DAQ and Ni DAQmx) from the two old CD's we had in our lab from a couple of years ago (the CD's were Ni DAQ 7). after installation, the PCI board on the computer was recognized by the device driver. However we still could not run our program under the new version of Labview (same situation and the same messages) I called 1-866-275-6964 on 9/2/08 and talked to Grant (service number:
1228841). He recommended that I download and install the updated version of device drivers.
Since I didn't have the DVD/CD for updated device drivers, I contacted Vanessa Trujillo. She gave me the DVD for the updated Ni DAQ (Traditional and mx).
But
when I tried to install the updated device drivers I got a message something like "some unsupported filed have been detected,..." so the updated device
drivers were not installed. It should be noted that up to here we still had the Ni DAQ (traditional and mx) installed on the computer from our old CD's (Ni DAQ 7).
Vanessa and I talked to Tom at the technical support department. He recommended that we download and install the Beta xx version for Ni DAQ since we were using Windows Vista. Mike put the Beta software on the Ni website/outgoing so I could download and install it. He asked me to uninstall the traditional Ni DAQ that we had on our computer from the older CD's. He
asked me not to un-install the Ni DAQmx (that we had installed from the old
CD). I was able to download the Beta software, however I could not install it since I got a similar message that some unsupported files were detected.
Right now we don't have any version of traditional Ni DAQ installed on the
computer but the NI DAQmx (from old Ni DAQ 7) is still installed on the computer. Vanessa let me borrow her new Ni DAQ DVD but as I explained I am not able to install the device drivers.
Vanessa - Did I miss anything?
Please advise. My cell number is 619-778-2033. I will be at our lab at UC,
Irvine at 2:00pm (CA/Pacific time). Please call if you have any questions.
Thank youTo me, it looks like you are missing some of the drivers and subVI's used in your program.
Whatever device you are using to measure fatigue or any other device probably came with a driver.
You need all of these drivers installed on this new computer.
Also, any subVI's and libraries you use in the program must also be installed on the new computer.
Whenever you get a message that says you are missing some component (the ones that you said you press 'ignore'),
see if you can find that library or subVI on the older computer. If so, save it to something so you can transfer them to the new computer.
Cory K -
What shall I do with a very slow running macbook pro with OS X Mavericks
Please help me. my macbok pro is running too slow specially when booting up. It's with OS X Mavericks. How can I restore it with the previous OS? i just upgraded it with Mavericks.
If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm=Process,ruid=User,%cpu | sed 's/ */:/g' | head -6 | awk -F: '{ printf "%-10s\t%s\t%s\n", $1, $2, $3 }'); PR "CPU usage by process"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply. -
What shall I do with my set up and new HD?
I just bought a new 250GB USB 7200RPM HD....finally!
I have often gotten the "HD too slow" error with Logic Express.
Should I just move the entire OS and all Logic Express software and components over to the new drive?
Use Logic Express on the new HD only?
Is there some sort of Raid set up I can use?
I am also a little concerned about the USB bus since I will have my Tascam US428, keyboard, etc. on the same.
What is the best way to handle this....please tell me your experiences and resolutions.
I am running L.E. 7.1.1
Thanks
Mini 1.42 Mac OS X (10.3.9) 1 gb ramHi Madison,
OOPS... you might have searched the forum before buying that USB hard drive.
Most audio recording is done best witha FireWire hard drive.This is because the USB protocol is not as fast as the FireWire protocol,in the real world.
And it looks as if you also have already too much going on in the USB department anyways.
Please do NOT move your applications and system to the USB drive,that would not work at all.
The best would be to get a FireWire drive.Or hopefully you bought a hard drive that has both FireWire and USB connections.
Cheers,
noeqplease -
What shall I do with the hundreds of files in the iPhoto Recovered Photos folder.
There are hundreds of files in this folder, mostly tiff files but some are png files. They are not my photos, they seem to be buttons, background etc. What are these? Can I delete them? There hasn't been anything added to this folder since July 2012. Almost all of it is from 7th, 8th, 10th July 2011.
I thought I should check before I delete them.You can delete the contents of the recovered photos folder if you do not want the photos there
No system elements are stored in the iPhoto library - as I said if you have not need for them them delete them
LN -
Query with bind var created under apex to generate xml data
Hi all;
BiP: 10.1.3.4
Apex: 4
DB 10G
Goal: want to generate a report by running a query with bind variables under apex.
problem: when attempted to create a query under shared components in apex, at the downloading xml data stage, I always get "no data found" eror. Thus I can't save xml data for further report work. This only occurs when bind var involved. I have tticked "incl. session variables" and added the item but to no avail.
Does anyone know how to do this and get the xml data to recive the bind variable ?
Thanks.
luluTo get the xml data, sql query has to return something. Why the sql is not returning anything can be better investigated outside the BI Publisher with special tool like SQL Developer or TOAD. There you have to run your query and make it working. One of the steps would be to try the sql without the parameter, see what data it brings back and go from there. One of possibilities why the parameter kills the output may be the NULL values involved, but you need to try the sql outside the BIP first.
-
What is the problem with this event handler in LabView 8.0?
Please find attached a copy of a simple Event Structure VI. Can anyone please tell me why the Pos 0, Pos 1, Pos 2 work fine, but Pos 3 does Not????? It works in Version 7.1 of Labview, but Not in version 8.0. Any help here would be appreciate
Everything is Free! Until you have to pay for it.
Attachments:
ValChgEventBug.vi 29 KBHi,
It doesn't work because the logic is flawed. If you run the VI in Execution-Highlight mode you will see that for a value-change of, say, 7.0, all the cases (except the first one) are True! And since there is no data dependency, whatever case executes last will set the final position.
You will want to change the logic to check if the value falls in a range, rather than just being greater than something. For isntance, the psuedo-code would be:
"go to position 2 IF value >= 4 AND < 6"
You are missing the "AND" part. Hope this helps.
-Khalid -
PLC SIMATIC s7-300 with adaptater MPI-USB under Labview
Hello everybody
I'm trying to connect a SIEMENS
SIMATIC S7-300 directly to my PC ( without using a profibus card ) , so
I'd like to know if some one think it's possible to use a MPI-USB
adapter for that knowing that I use Labview to program my S7-300.
Thanks ! .Deltalogic provides several low-cost S7 adapters (MPI-Adapter, MPI-Adapter-USB, HMI-Adapter,...) and appropriate LabVIEW drivers. If you can't understand German you should send them an email.
Here is the email-address for sales related questions: [email protected]
If you are looking for a high-performance solution you should have a look at the Profibus boards from Comsoft. Comsoft provides a native LabVIEW driver for their boards that runs on Windows and LabVIEW Real-Time systems.
Best regards,
Jochen Klier
National Instruments Germany -
Newbie, what to with the project after it's finished?
total newbie here... I just finished my first DVD using FCE. Once you're done, what do you do with the project file and all the associated files?
Is there a way to have everything archived into one folder (i.e., like InDesign's "Pre Flight" and "Package" features)?
What happens if my source files are in different places on my computer, and after I archive it, I open it? Won't the mapping to the files be off, FCE can't locate them?
PowerMac G5 Dual 2GHz Mac OS X (10.3.9)My back-up methods for FCE projects:
1) I blow up all my Capture Scratch clips. I save the original DV footage, and since I am careful about my reel numbers, I can re-capture it later
2) I copy all my other media: music, Photoshop files, LT projs, etc onto a DVD.
3) On the DVD I also store my FCE project file and my iDVD project file if I have one. Also include any drop zone movies I may have made .. sometimes this eats up a couple DVDs
Once I have all this, I can easily re-create the projects through Capture Project in FCE or by loading up the iDVD project
I also record the Timeline of the FCE project to DV tape, to make copies, etc
Also nice to save a Disk Image of your iDVD project, for later copies
Maybe you are looking for
-
Get Support link does not work after SPS13 installation
Good evening, we have patched our system from NW7 SPS10 to NW7 SPS13. We have problem with our portal: on home page Get Support Link doesn't work! When user click on Get Support link doesn't happen, only web page change from https://sitemane/irj/port
-
Hi, recently found out that my font and color choices for AOL do not show up on other people's computers. I can view their font and colors...why can't they see mine?
-
How do i get my windows 8 computer to recognize my ipod
how do i get my windows 8 computer to recognize my ipod
-
How to view my laptop project from my phone app?
Hi, I am editing a short film on Adobe from my laptop. Is it possible for me to view it from the Adobe app on my phone? thanks
-
Possible to fill in local amount in FB50?
Hi all! My customer have a problem. Local currency is SEK (Swedish Crones) and wants to make a booking from bank account in EUR to bank account in SEK. We have received a bank account statement from the bank where we can se that the bookings have bee