What shipping carrier is my EZ Return label for? Returning ultracompact USB

Dumb question...
I got my replacement Ultracompact USB charger on my doorstep, removed the top label exposing the EZ return label to send the old charger back. I brought the box with me to work, but nowhere on the label does it say what carrier the box label is for. All my paperwork is at home.
Airborn? DHL?

It says DHL on the paper you receive. I'd go to the dhl site and see if the dhl drop off site is near your location. Well i'm not saying the drop off zone, but a place like where they accept package in person. For me it was this place where they have all 3 carriers, fed ex, dhl, and ups. So i just handed the box and walked out.

Similar Messages

  • What shipping carrier for iphone 5 in UK

    What shipping does apple use for shipping out iphone 5?
    Cause royal mail comes around noon but others are totally random. Just wanted to know so I have a idea.

    I spoke to an Apple advisor last night via chat and they said they will using both Royal Mail and other courier services to deliver the iPhone 5's - very vague and couldn't give me anymore information on it. Guessing we'll only know when we get our tracking numbers. I'm graduating that day so will be out all day - TYPICAL!

  • I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

    I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

    You cannot return to previous state. The update re-locked the iPhone
    to the original carrier. You must contact the original carrier to see if
    they offer unlocking and if you qualify.
    What does it say when you look at Settings=>General=>Carrier?
    Be advised that if your iPhone had previously been hacked/modified/
    jailbroken to work with other than original carrier, it may be impossible
    for the original carrier to unlock it properly.

  • Prepaid shipping label for edge program

    I used my edge program to get the new iphone.  However, there was no prepaid shipping label in the box to send my old phone in.  Any one else have this issue?  Am I supposed to get it from somewhere else?

        et1234,
    Not at all! Happy to help with your questions.  When you click on the above link you will need to sign into your My Verizon account. Once signed it you can click on the order you need the label for and there will be a Print Return Label option.  You can always have the store assist you in printing a label as well. Let us know if you need any further assistance!
    TrevorC_VZW
    Follow us on Twitter @VZWSupport 

  • What is the best way of returning group-by sql results in Toplink?

    I have many-to-many relationship between Employee and Project; so,
    a Employee can have many Projects, and a Project can be owned by many Employees.
    I have three tables in the database:
    Employee(id int, name varchar(32)),
    Project(id int, name varchar(32)), and
    Employee_Project(employee_id int, project_id int), which is the join-table between Employee and Project.
    Now, I want to find out for each employee, how many projects does the employee has.
    The sql query that achieves what I want would look like this:
    select e.id, count(*) as numProjects
    from employee e, employee_project ep
    where e.id = ep.employee_id
    group by e.id
    Just for information, currently I am using a named ReadAllQuery and I write my own sql in
    the Workbench rather than using the ExpressionBuilder.
    Now, my two questions are :
    1. Since there is a "group by e.id" on the query, only e.id can appear in the select clause.
    This prevent me from returning the full Employee pojo using ReadAllQuery.
    I can change the query to a nested query like this
    select e.eid, e.name, emp.cnt as numProjects
    from employee e,
    (select e_inner.id, count(*) as cnt
    from employee e_inner, employee_project ep_inner
    where e_inner.id = ep_inner.employee_id
    group by e_inner.id) emp
    where e.id = emp.id
    but, I don't like the complication of having extra join because of the nested query. Is there a
    better way of doing something like this?
    2. The second question is what is the best way of returning the count(*) or the numProjects.
    What I did right now is that I have a ReadAllQuery that returns a List<Employee>; then for
    each returned Employee pojo, I call a method getNumProjects() to get the count(*) information.
    I had an extra column "numProjects" in the Employee table and in the Employee descriptor, and
    I set this attribute to be "ReadOnly" on the Workbench; (the value for this dummy "numProjects"
    column in the database is always 0). So far this works ok. However, since the numProjects is
    transient, I need to set the query to refreshIdentityMapResult() or otherwise the Employee object
    in the cache could contain stale numProjects information. What I worry is that refreshIdentityMapResult()
    will cause the query to always hit the database and beat the purpose of having a cache. Also, if
    there are multiple concurrent queries to the database, I worry that there will be a race condition
    of updating this transient "numProjects" attribute. What are the better way of returning this kind
    of transient information such as count(*)? Can I have the query to return something like a tuple
    containing the Employee pojo and an int for the count(*), rather than just a Employee pojo with the
    transient int inside the pojo? Please advise.
    I greatly appreciate any help.
    Thanks,
    Frans

    No I don't want to modify the set of attributes after TopLink returns it to me. But I don't
    quite understand why this matters?
    I understand that I can use ReportQuery to return all the Employee's attributes plus the int count(*)
    and then I can iterate through the list of ReportQueryResult to construct the Employee pojo myself.
    I was hesitant of doing this because I think there will be a performance cost of not being able to
    use lazy fetching. For example, in the case of large result sets and the client only needs a few of them,
    if we use the above aproach, we need to iterate through all of them and wastefully create all the Employee
    pojos. On the other hand, if we let Toplink directly return a list of Employee pojo, then we can tell
    Toplink to use ScrollableCursor and to fetch only the first several rows. Please advise.
    Thanks.

  • What is the code to get the  Label of  radio button item at runtime?

    Hi All
    I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform.
    My requirement is to dynamically get the label of the radio button item in a radio group.I am able to get the label of the radio group as shown below
    Item :Radio group
    Label : Gender
    IF m_type = 'RADIO GROUP' THEN
         m_label:=Get_Item_Property(m_Item ,label);
    END IF;
    There two Radio buttons inside this radio group which are
    item     : Radio button
    Label : Male
    item :Radio button
    Label :female
    What is the code to get the label of radio button(i.e) male and female ?
    How will I get the count of radio buttons in a radio group at runtime?
    Regards
    Mohan

    But you have to provide the button name which cannot be get at runtime.
    This is a lack of information that the Dev team would correct !
    Francois

  • What is the purpose of using  return process sales  doc type?

    what is the purpose of using  return process sales  doc type?

    hi,
    There is the standard process
    1)Order type( RE) VA01
    2)Delivery( LR)Vl01n with reference to return order
    i)if the movement is 651then system will not generate accounting document upon doing Post goods Receipt ,the stock will be in the return location
    then you use movement type 453 to get the stock in UN restricted
    ii)if the movement type 653 the system generates accounting document and stock posts in unrestricted use
    3)With reference to Delivery raise Credit memo (RE) with transaction VF01
    CHAN

  • When I call nifGetObjectDictionary on a Domain Index, what is the format of data returned

    hello,
    When I call nifGetObjectDictionary on an Active Schedule Domain Index (450) of NI Card, retrieved from S-OD -> DLL Link Schedule OD Index, what is the format of data returned? I received 0801C202FFFF000000 as data and it is not matching with FF-Spec (Field Device Access Agent, page 95).
    Could you please let me know the format/structure of the data i received, so that i can parse them and understand?
    Also let me know is there any API available in NI API to upload/read Schedule Domain?
    Thanks
    Shankar.

    Sorry for replying late!
    We don't have the nifGetObjectDictionary function, so may I make a guess that you mean nifGetObjectDescription? If I'm right, there will be some trouble.
    To be honest, basically we don't support the APIs which are not included in the "NI-FBUS CM Function Reference Manual". In further, would you please let me know how you find this kind of internal functions? We cannot support it until we verify the customer has bought the complete version of APIs package and this package is still in the support period. If it matches your case, would you please help me in the verification? And then we can support the details for your question later.
    On the other hand, we don't have the APIS to upload/read Schedule Domain now.

  • HT201270 iOS: Updating your carrier settings_ what do carrier settings do?

    Message:   iOS: Updating your carrier settings_
    what do carrier settings do?

    Connectivity to the carriers network.
    Why the hesitation to update? or better question, why do you care?
    If you want the best connectivity, do the update.  If you do not care if there are connectivity issues, don't do the update.  But at the same time, do not complain when you have connectivity issues.

  • I received my iwatch 3 days ago, and it has just gone dark and no response at all. What else should I try before returning it?

    I received my iwatch 3 days ago, and it has just gone dark and no response at all. What else should I try before returning it?

    you should probably charge it.  Plug it into the wall charger and let it sit overnight.  Then hold both the crown and side buttons together while it's charging for 10 seconds or more and it should turn on. 

  • What is meaning of Labels, what is their purpose, how we create labels

    what is meaning of Labels, what is their purpose, how we create labels.

    To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    1. Create a page window and assign it to a page.
    2. Choose Edit --> Main windows.
    A dialog box appears.
    3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
    4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
    5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.

  • I never got my UPS return label for my old equipment

    I never got my UPS return label for my old equipment

    emchaviano wrote:
    I never got my UPS return label for my old equipment
    Apologies. We can get you a UPS Return label if you need one.
    Otherwise, you can return the equipment at one of the local service centers listed below or any UPS Store location (no label required).
    Some options listed below: 
    Comcast
    18055 SW Franjo Rd
    Palmetto Bay, FL 33157
    MONDAY-FRIDAY: 8:00am-5:00pm
    SATURDAY: 10:00am-2:00pm
    SUNDAY: Closed
    Comcast
    7404 SW 117th Avenue
    Miami, FL 33183
    MONDAY-SATURDAY: 8:00am-7:00pm
    SUNDAY: Closed
    The UPS Store
    14629 SW 104 STREET
    MIAMI, FL 33186-2905
    Phone: (305)408-7430
    Mon - Fri 08:30-07:00, Sat 09:00-04:00
    The UPS Store
    12973 SW 112TH ST
    MIAMI, FL 33186-4768
    Phone: (305)382-5220
    Mon - Fri 08:30-07:00, Sat 09:00-04:00
    The UPS Store
    8306 MILLS DR
    MIAMI, FL 33183-4838
    Phone: (305)595-8577
    Mon - Fri 09:00-07:30, Sat 09:30-05:00
    The UPS Store
    18495 S DIXIE HWY
    MIAMI, FL 33157-6817
    Phone: (305)238-2242
    Tue - Fri 08:30-07:00, Sat 10:00-03:00
    More info here: http://customer.xfinity.com/help-and-support/cable-tv/returning-your-equipment/

  • What shipping company does Apple ship with in the U.S.?

    What shipping company does Apple ship with in the U.S.? 

    It depends. They use UPS, FedEx, and USPS depending on what is being shipped.

  • What is the need of creating partner functions for sales document type.

    Hi SAP (SD-GURUS),
    Actually we create partner functions  before creating customer ex: sold to party, ship to party, bill to party, and payer.
    These partner functions are going to be copied into sales order while processing sales order.
    Again what is the need of creating partner functions for sales document type.
    Thanks&Regards
    sreenivas peruru

    There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
    Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
    So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
    Hope this helps...
    THanks,
    Jignesh Mehta

  • Packing slip and address label for delivery

    Hello all,
    I have a business requirement where i want the delivery to generate packing slip and address label for delivery, once the TO picking is complete and updated in the delivery.
    My first question - I would like to the configuration steps involved in making the delivery to print the required output types automatically .
    and my second question is how the SAP system can be configured to make the delivery print the packing slip and address label for delivery automatically once the Picking status is updated in the delivery.
    Thanks,
    Maxx

    Hi Max,
    You have to carry out your settings in:
    SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries
    1) Maintain Access Sequence
    - you should have a valid access sequence with proper the condition tables
    2) Maintain Outout Types
    - you should have an output type with proper settings: print progrm, samrtform (or spascript, etc), etc
    - you output should be assigned to the proper access sequence
    3) Maintain Output Determination Procedure
    - you should have a valid procedure --> you have to assign your output type to the procedure
    - in field V_T683S_XX-KOBED you have to define a requirement type for your output type (that contains an ABAP code). This ensures that the output type will be generated only if the conditions defined in the ABAP code are met.
    4) Assign Ouput Determination Procedure
    - You have to assign the procedure to the delivery type you use
    Master Data
    If your configuration is OK, you can create the output determination condition record in VV21:
    - you have to choose the proper key table
    - you have to define the proper conditions
    - you have to define the printer
    - you have to define number of outputs
    - etc
    SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Define Requirements
    - Here the programmer can define the Requirement Type that can be assigned to the output type in the procedure.
    - You can use e.g. VBUK-PKSTK to check the packing status (VBUK-VBELN=LIKP-VBELN)
    All the mentioned settings (config, master data) can be done in transacton NACE also (except writing the ABAP code).
    Regards,
    Csaba

Maybe you are looking for

  • Update Routine with Return table

    Hello All: I'm trying to populate the cube by splitting 1 record into many records. I have following ABAP code in the routine which is failing at the LOOP keyword $$ begin of routine - insert your code only below this line        - fill the internal

  • Error when  building a report from 2 different subject areas

    Hello Experts, I am using obiee 11.1.1.5. I have 5 dimension D1,D2,D3,D4,D5 connected to fact1 and 4 dimension connected to fact2 such as D1,D2,D6,D7. where D1,D2 is common to both the facts. Fact1 Is in subject area 1 and Fact2 is in subject area2.

  • Jsp/bc4j form

    Hi All I am trying to develop a JSP page to use the user to submit a form. In normal browse edit page we create a row and then update that row. How can i code the form that when user wants a form the new row already gets created and the edit form is

  • Creating shapes and adding them to canvas

    hi all How can we create shapes in flex..add them into a canvas i found code that used sprite but was unable to add .as it not being a uicomponent?

  • Which BAPI to update assignment number(BSEG-ZUONR)

    Hi All, I need to update a BSEG-ZUONR. I guess update is not the best way since i want to update in all related tables. Could you please let me know the BAPI through which besg-zuonr field can be updated. Regards, Dash