What should be done in certmap.conf for 2-way SSL support from a standalone Java application to an SSL enabled LDAP Server

To support certficate based client authentication using 2-way SSL from a standalone java application which uses JNDI and JSSE1.0.2 to connect to an SSL enabled LDAP Server how do we configure the certmap.conf?Is there any additional setup required at the LDAP Server side apart from enablinf SSL with the option"Required Client Authentication" enabled.The 2 way SSL handshake goes through but the access log file (After configuring the certmap.conf for the issuer DN of the client certficate etc..)shows SSL failed to LDAP DN?But inspite of this access log error the Java client does get an SSL Connection object with which it is able to connect to the LDAP.IS the certmap.conf file being looked up by the LDAP Server at all?

have you out.flush() and out.close() before you call connection.getInputStream()?

Similar Messages

HT4623 for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes and suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from ny side....

for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes from older version to newer version and after installation when it was updating my iphone then suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from any side....
and now its not even restoring back....showing me error's
m getting very irritated and unable to sleep jst because of all this crap....
instead i lost 1gb internet data in downloading the update

i tried restoring itz saying error occured 2008 :-(

HT3209 purchased CSI 13 season, and quality is unwatchable becase probably some error in the file, no picture at all. Please let me know what should be done since I paid for this

Please help what should i do

Depending upon what country that you are in (TV shows can't be re-downloaded in all countries) then try deleting the shows from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download TV shows or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those shows and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

What should be done for this ?

hi ,
here is my question ..my xml will have
<Message>
<ATO>
<somefiled="X" type=int value=35 />
</ATO>
<FIX>
<somefiled="Y" type=String value=50 />
<FIX>
</Message>
Now first i have to parse this xml ..then my java program is going to accept value from user ..and depending on user specified value i've to use either ATO or FIX fields...e.g if user value is 35 then my program should use fields within ATO node.
what should be done for this ..
and what if i change values in my xml file..will i have to restart my application to load xml again ?

I have changed your XML to make it well formed. Please refer this further in this reply.
Well Formed XML:
<Message>
<ATO somefiled="X" type="int" value="35"/>
<FIX somefiled="Y" type="String" value="50"/>
</Message>
daitkarsachin wrote:Now first i have to parse this xml ..then my java program is going to accept value from user ..and depending on user specified value i've to use either ATO or FIX fields...e.g if user value is 35 then my program should use fields within ATO node.
what should be done for this ..A simple XPath Query can do trick for you, it can give you ATO or FIX element according to user specified value. XPath query can be:
// replace ##user_specified_value## with value user enters.
String xPathquery= "/Message/child::*[@value='##user_specified_value##']";
daitkarsachin wrote:and what if i change values in my xml file..will i have to restart my application to load xml again ?Not necessary to restart application but you need to parse or reload updated XML file again.

HT1212 Hello, for some reason i'Ve lost the ability to access my ipad, although i know the password, the ipad now is deactivated and telling me to connect to iTunes, i've done so but itunes can not access it anyway. Please tell me what should be done to r

Hello, for some reason i'Ve lost the ability to access my ipad, although i know the password, the ipad now is deactivated and telling me to connect to iTunes, i've done so but itunes can not access it anyway.
Please tell me what should be done to retrieve my photos on ipad before reformatting it.

Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

What should be done to include the current controlfile in the database copy

Hi
When trying to create a copy of the database it always fails copying the controlfile
What should be done to include the current controlfile in the database copy with the %b format
RMAN> backup as copy database format 'd:\backup\%b'
2> ;
Starting backup at 13-SEP-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
input datafile file number=00001 name=D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
output file name=D:\BACKUP\SYSTEM01.DBF tag=TAG20100913T204940 RECID=16 STAMP=729636617
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile file number=00003 name=D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
output file name=D:\BACKUP\UNDOTBS01.DBF tag=TAG20100913T204940 RECID=17 STAMP=729636660
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile file number=00002 name=D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
output file name=D:\BACKUP\SYSAUX01.DBF tag=TAG20100913T204940 RECID=18 STAMP=729636692
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
*copying current *control file**
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:36
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpn
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=D:\ORACLE\ORADATA\ORCL\USERS01.DBF
output file name=D:\BACKUP\USERS01.DBF tag=TAG20100913T204940 RECID=19 STAMP=729636697
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:01
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
*including current SPFILE in backup set*
channel ORA_DISK_1: starting piece 1 at 13-SEP-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:38
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpnEdited by: hrishy on Sep 13, 2010 8:26 AM

hrishy wrote:
Allright your trick configure controlfile autobackup on does the trick but i am cluless why it worksWhy clueless? That's a documented and a perfectly normal behavior!
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV89408
HTH
Aman....

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

What should be done to recover the database?

Hi all,
While backing up the database, the computer running Oracle loses power. After restarting the
computer what should be done to recover the database?
Please help me..
Thank you all for your cooperate.

Thanks mr. Eduardo Rezende.
I'm an Arab student and now I study database administrator course. This question asked by my teacher. So, if anyone can answer this question and some other questions please help me.

TS1717 itunes won't start because it says the folder was made in newer version, what should be done?

itunes won't start because it says the folder was made in newer version, what should be done?

If you haven't deliberately tried to downgrade iTunes then it is possible the library is corrupt. This approach should work.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Firefox crashes every time at the moment I enable flash plugin. I've uninstalled and installed a plugin again with no positive result. What should be done?

Firefox crashes every time when I enable a flash plugin. It started today after an automatic attempt of updating shockwave. I've uninstalled flash and installed it again. Still the same story. There are no previous version of flash available on adobe site. What should be done?

I have Firefox 3.6.8 and newest version of Flash. I've followed all recommendations made by Firefox support, changing plug in container settings, changing hang time, nothing helps. I'm forced to disable Adobe Flash or Firefox crashes whenever the Flash plug-in is needed. There are numerous reports of this problem throughout the Firefox troubleshoot help pages. No one seems to have a good answer to fix this. I now keep Flash disabled and use it only when going to a web page that needs it. If I find myself on such a page, I can go into tools, enable flash and do a reload. For some reason, this works. The reload will let Flash do its thing and Firefox won't have an APPCRASH. Once I leave that page, however, I must disable Flash again or I'll experience a crash the next time Flash is called upon. I really like FF but have downloaded Chrome and am now playing with it to see if I like it enough to use it as my primary browser. It's a shame that FF can't come up with a fix as hundreds have the same complaint.

In BDC Call Transaction, what should be done to move to the second tab

Hi,
I wanted to do BDC Recording, I have done the recording for all the 4 tabs. After recording i gave process, the screen is not going to the second tab, what should be done to move to the second tab

Hi ,
While doing BDC uisng tabs , press enter after entering complete data in every tab. Then go to the second tab and enter data..so on..There is some problem in the recording only. Check the recording multiple times.
Regards,
Jayaram..

What should be done when client.connect() failed?

Hi guys,
I am using JCO to connect backend System. If client.connect() is called and for certain reason failed, what should I do to roll back the action so that the system keeps normal. I think client.disconnect is not the solution, because connect is not successful. I encountered this problem, and my portal is totally down, what should I do to avoid this situaltion?
My code is
try{
          client.connect();
catch (JCO.Exception e){
//WHAT SHOULD BE DONE HERE?
     System.exit(1);
Thanks in advance!
Regards,
Liying

Hi,
Can you try this code.
class JCOConnector {
private JCO.Client mConnection = null;
// loginParams will settings for connection
public static boolean connect(Properties loginParams) {
boolean returnCode = false;
          try {
               mConnection = JCO.createClient(loginParams);
               long timeBeforeConnecting = System.currentTimeMillis();
               mConnection.connect();
               long timeAfterConnection = System.currentTimeMillis();
               returnCode = true;
          } catch (Exception e) {
               try {
                    disconnect();
               } catch (Exception e2) {
               throw new RuntimeException(e);
          return returnCode;
      * To Disconnect from the middleware.
     public static boolean disconnect() {
          boolean returnCode = false;
          if (mConnection != null) { // if connection exists
               try {
                    mConnection.disconnect();     // disconnect from the middleware
                    returnCode = true;
               }catch (Exception e2) {
               }finally {
                    mConnection = null;
          }else{
               returnCode = true;
          return returnCode;
Regards,
Ashwani

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

What should I do if the encryption for FileVault has paused and won't restart?

What should I do if the encryption for FileVault has paused and won't restart?

If you don't already have a current backup of all data, back up before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

What should be done in certmap.conf for 2-way SSL support from a standalone Java application to an SSL enabled LDAP Server

Similar Messages

Maybe you are looking for